TWIN CAM 100 HP- HEADS, CYL/PISTONS ,CAMS (Greenville 45331) $900

[Craigslist]

I have a Twin Cam 96" that puts out over 100 hp and 100 ft pds of Torque. It is a Carls Speed Shop Git Kit #5 set up,You can go online to his web and get more info......................................... I paid over $4000 for this yrs back.

Heads- flow benched, heavier springs, valves and seats,etc.

Cylinders and Pistons are Twin Cam I believe .005 over. after removing the jugs, they need bored to a 98 inch.....wrist pin gouged the cylinder,

Compression right before tear down was 118 on bad cylinder and 125 on good.

Carls 575 lift cams,\

HD adjustable push rods

Power Commander 111

I have Original Build Sheet, and 2 or 3 Dyno sheets from changing pipes.

I would cost well over $1000 to get stock heads reworked to put out 100 HP, get it all for less here.....

This Bike Runs Great, 2001 Road Glide it WILL eat tires if you want to...............very big fun

any Q email

More...