tyler524 Posted August 3, 2010 Report Share Posted August 3, 2010 I have a set of 18" Konig wheels that I had powder coated and havn't got around to getting the tires mounted back up. I am looking to sell them as a set. The tires are Fuzion ZRi 225/40r18 and have most of the the tread left. I would say that they have 70% on the two that I had on the front and probably about 90% left on the two that were on the back. These are aluminum wheels and don't weigh much but the older paint was chipping off so I had them blasted and powder coated gun metal gray. The one wheel does have a little bit of curb rash but is hardly noticeable at all since it has been coated over. I am looking for $600 obo. Seems pretty reasonable to me considering the tires alone probably push over 500 and the coating that I had done to them. They have just been sitting in the spare bedroom under a blanket for months now and am too lazy to put them on my new car.Said Curb Rash Quote Link to comment Share on other sites More sharing options...
CattaniAFJ Posted August 3, 2010 Report Share Posted August 3, 2010 Good looking wheels. Quote Link to comment Share on other sites More sharing options...
YSR_Racer_99 Posted August 3, 2010 Report Share Posted August 3, 2010 Bolt pattern(s)?What kind of car were they on? Quote Link to comment Share on other sites More sharing options...
tyler524 Posted August 3, 2010 Author Report Share Posted August 3, 2010 (edited) I believe its a universal 5 lug as it has two different bolt patterns to use. I thought about that last night was too Damn tired to look up the bolt pattern. I had them on a 3rd gen eclipse (2001).Edit: looks like the larger is 5 x 4.5 (114.3mm) and I will measure the smaller pattern when I get home but I am guessing it is a 5 x 4 (100mm) Edited August 3, 2010 by tyler524 Quote Link to comment Share on other sites More sharing options...
tyler524 Posted August 4, 2010 Author Report Share Posted August 4, 2010 I will try to get the tires mounted and balanced this week to make things easier if anyone is interested Quote Link to comment Share on other sites More sharing options...
Fonzie Posted August 5, 2010 Report Share Posted August 5, 2010 (edited) You know off the top of your head if those'll fit on an '05 Accord Ty?Or a '94 Mustang for that matter? I know the 'Stang has OEM 15"s Edited August 5, 2010 by Fonzie Quote Link to comment Share on other sites More sharing options...
tyler524 Posted August 5, 2010 Author Report Share Posted August 5, 2010 You know off the top of your head if those'll fit on an '05 Accord Ty?Or a '94 Mustang for that matter? I know the 'Stang has OEM 15"sSeems like they should fit either of them. The charts show both of them using 5x114.3 Quote Link to comment Share on other sites More sharing options...
Fonzie Posted August 5, 2010 Report Share Posted August 5, 2010 (edited) Seems like they should fit either of them. The charts show both of them using 5x114.3Yeah... This is what I just found for the Accord....http://www.discountedwheelwarehouse.com/Honda___Vehicle_Bolt_Pattern_Reference.cfmAnd the Mustang....http://www.discountedwheelwarehouse.com/Honda___Vehicle_Bolt_Pattern_Reference.cfmI'll have to show 'em to the Mrs & see if she likey. So far, she seems to miss her chrome ones off the PacificaWhat's the "offset" mean? Edited August 5, 2010 by Fonzie Quote Link to comment Share on other sites More sharing options...
tyler524 Posted August 5, 2010 Author Report Share Posted August 5, 2010 Yeah... This is what I just found for the Accord....http://www.discountedwheelwarehouse.com/Honda___Vehicle_Bolt_Pattern_Reference.cfmAnd the Mustang....http://www.discountedwheelwarehouse.com/Honda___Vehicle_Bolt_Pattern_Reference.cfmI'll have to show 'em to the Mrs & see if she likey. So far, she seems to miss her chrome ones off the PacificaWhat's the "offset" mean?It is either the inner face of where the rim mounts to the hub to the inside of the wheel or the outside of the wheel Quote Link to comment Share on other sites More sharing options...
schmuckingham Posted August 5, 2010 Report Share Posted August 5, 2010 Whats the offset? Quote Link to comment Share on other sites More sharing options...
tyler524 Posted August 5, 2010 Author Report Share Posted August 5, 2010 Whats the offset?I will measure and calculate tonight when I get home from work. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.