2.0L Ford Probe Turbo Kit

[tyler524]

This is a long shot to sell on here but you never know. $600

Posted over on the probe forums:

Well I had purchased this from another member a few years ago, I was in the process of building a new motor and redoing the car. I put a spare motor in it after I finished the body work and what would you know, a week later it gets totaled. I never got a chance to install it. I also have a megasquirt that I built including the stimulator board and a usb port add on. Everything tested fine just never got a chance to get it on before the car was totaled. I am willing to deal so make me an offer. I have had all this sitting in a box in the garage and as much as I would like to, I won't be buying another probe any time soon. I AM willing to negotiate.

NOTE: This is an INCOMPLETE Turbo 'package' for a 2nd Gen 2.0 but definitely a great start for someone looking to boost

Package price = $700obo + shipping

The package includes:

JGS Turbo Manifold

- JGS Stage 1.4 Turbo Header Kit w/ T25 Turbo Flange

- minor surface rust from sitting around

- would look excellent with a few coats of high-temp paint

- clean welds

- Retail = $198 shipped UN-WELDED

Garrett T25 Turbo w/ Wastegate Actuator

- 95-99 DSM Eclipse Turbo

- Removed from a very low mileage (less than 50k) 97 Eclipse GS-T

- excellent condition, spins freely with no shaft play

- All NEW gaskets and 'newer' bolts

- Includes oil drain flange and gasket

- Also includes an Earl's brand fitting for the oil feed line

(3) 2.25" Blue Purosil 4-ply Polyester Reinforced Silcone Couplers

- Working Pressure = 65 PSI

- Burst Pressure = 175 PSI

- Temperature Range = up to 350 F

- Inner Diameter = 2.25"

- Length = 2.75"

Fernco TB to MAF Reducer

- works well when going from the throttle body intake piping elbow to the MAF.

90-94 1g DSM BOV w/ Steel Flange & Gasket

- This Blow off valve will hold up to 20PSI, which is more than this turbo is capable of.

- Never been crushed

2.25" Braid Covered Exhaust Flex Section

- great addition to your custom downpipe

2.25" 90 degree Aluminized Steel Elbow

- just a leftover piece that could be used to help create a custom downpipe

NGK 7mm Blue Spark Plug Wires w/ Coil Wire

- excellent condition w/ less than 5k miles

- NGK-8179

Misc. Vacuum Line and Steel Braided Line

-Megasquirt I v2.2 with usb add on & Stiumlator Board v2.2