Suomy Apex Capirex LE - Loris Capirossi

[Hoblick]

Limited Edition Capirossi Helmet, own a piece of history!

Apex helmet by SUOMY was designed giving maximum consideration to internal comfort, construction technology, reliability, and safety for both rider and racer.

As per SUOMY tradition, APEX continues with its external sport design while at the same time assuring the comfort that only a "top-of-the-line" helmet can give.

Using 360 degree scientific knowledge, the APEX has been designed and tested in wind tunnels to optimize external flow while taking serious consideration to the internal ventilation.

State of the art technical solutions were used in the design and manufacture of this helmet. The new materials used in construction gives the shell a unique rigidity while maintaining considerable lightness in the overall weight of the helmet.

SAFTY

Shell available in three sizes (M, L and XL), and made in Italy. The new composite material is a combination of carbon in various grammages and aramidic fibre.

Internal polystyrene protective liner, available in three sizes (M, L and XL). The special shape and construction featuring differentiated density increases mechanical resistance in the event of accidental shocks.

The face shield is pressed and cut from a flat sheet and then thermoformed. Each face shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Moreover, thanks to this process, there is no need to apply overlapping lenses inside the face shield since it is equipped with permanent “anti-fog” and “anti-scratch” treatments.

TheD-RINGretentionsystem,designedandpatented by Suomy: this reliable and tested double D ring systemensures stability, safety and resistance.

INTERNAL COMFORT

• Removable and washable cheek pads are available in different thicknesses for complete customization of the final product.

• Completely removable and washable internal shell is in different thicknesses for complete customization of the final product.

• The removable internal shell has been ergonomically designed for a uniform and controlled fit of the entire head. The visible aeration slots ensure that incoming air thermo-regulates the inside of the helmet and that the flow of hot air is easily discharged from the rear.

The internal elements (cheek pads and internal shell) are made entirely of COOLMAX® ACTIVE fabric with INTERPOWER treatment:

- Wicks sweat away from the body;

- Keeps the user fresh, dry and comfortable;

- Lightweight, soft and breathable fabric;

- Performance verified and certified by ADVANSA.

VENTILATION

Polystyrene with grooves to direct the incoming air flow.

Upper air intake with on/off switch to control the helmet’s internal ventilation.

Adjustable chin-guard air intake to control the helmet’s internal ventilation.

Spoiler and rear exhaust vents that facilitate the discharge of the incoming air flow.

AERODYNAMIC

Rear spoiler: made from polycarbonate the spoiler has been subjected to wind tunnel research and testing so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself.

SIZES

The fibreglass shell, available in three sizes: XS-M, 2) L-XL, 3) XXL-XXXL

Available sizes

XS 53/54 6-1/2” 6-5/8”

S 55/56 6-3/4” 6-7/8”

M 57/58 7” 7-1/8”

L 59/60 7-1/4” 7-3/8”

XL 61/62 7-1/2” 7-5/8”

XXL 63/64 7-3/4” 7-7/8”

XXXL 65/66 8” 8-1/8”

Homologation

Always check the homologation list for each model and verify availability/possibility of using them in the countries where they are sold.

ECE 22-05 Europe

DOT America and Canada

QAS Australia and New Zealand

JIS Japan

INMETRO Brazil

NBR 7471

PM me for pricing

Edited March 1, 2012 by Hoblick

[grapesmuggler27]

Pm sent!

[Hoblick]

PM back at ya