RidersDiscount

Sex sells, just saying.

Weighing in at under 3 lbs, the Vega F117 Carbon Fiber helmet is ECE approved and features a drop down sun shield. Did we mention it's under 3 lbs? Available to purchase through our website, give MIKE a call if you have any questions at 866.931.6644 x 804. Is email more convenient? Send us a message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! Designed on the computers and in the wind tunnel for a proven aerodynamic shape, this Vega helmet is highly stable at speed. Inside you'll find a plush foam pillow molded liner with Coolmax moisture-wicking fabric. It's also fully removable and washable for when you need to freshen up the helmet. The liner also features pockets for speakers. The external anti-fog, anti-scratch shield is also available in smoke or mirror finish. The drop down sun shield is replaceable with amber and dark smoke. To use the internal sun shield, simply use the two trigger system on the left side of the helmet. The red trigger on the left releases the shield and raises it back up, use the red trigger on the right to drop the shield down. The Vega F117 is the most affordable ECE approved carbon fiber helmet available. Give our expert sales staff at Riders Discount a call to order yours today!

As long as there's traction and heat, there's no end to the riding season according to Gerbing. Our hands are the first thing that gets cold and what better item to add to your riding gear collection than Gerbing's 12V EX heated gloves available from Riders Discount with retail at $179.99. Gloves, power harness, Y-harness, and a set of fuses are included in the box. Not yet listed on our website, these Gerbing heated gloves can be ordered by calling MIKE at 866.931.6644 ext. 804 or by sending us a private message through this forum. Is email more convenient? Write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! Designed to work seamlessly with Gerbing's coreheat12 riding system, the Gerbing EX gloves come with a battery harness and y-harness however we recommend purchasing a temperature controller to avoid overheating and burns. Single and dual temp controllers are available with the dual shown here. We highly recommend getting the dual as more often than not, customers are ordering at least a jacket liner and gloves and the dual controller allows you to control the temps separately from one another. Note: Gloves can work on their own with a single temp controller. A jacket is not required. Using Gerbing's patented micro-wire heating technology, this glove gets from cold to hot in around 4 seconds. Using stainless steel bundled wire, the heating elements will last last for a long time and are actually guaranteed for life. Electrical plugs, connectors, and any solder joints, as well as all materials and craftsmanship are covered by a one year warranty from date of purchase. Even if you don't have the heat turned on, you'll stay plenty warm thanks to this fleece lined interior - The gloves themselves feature an ergonomic finger curve for flexibility, wrist cinch straps, wear resistant palms with palm sliders, and rain wiper on the left index finger. Coreheat12 Thermovelocity System is powered by your motorcycle's battery and using a combination of included harnesses and optional temp controllers, you can combine these gloves to work with any of the coreheat12 riding apparel from Gerbing. Riders Discount carries the full line of Gerbing products! If you have any questions or would like to place an order, give our expert sales staff a call today! These work perfectly with the Gerbing EX jacket liner shown here -

Agreed!

Great to hear!

One of the worst feelings when arriving at the track is realizing you've forgotten your key. Installing a key switch elimination harness from Woodcraft removes that worry and allows you to go keyless with your bike. Available from Riders Discount, these are currently available for Kawasaki ZX636R (2013+), ZX-10R (2011+), Z1000 (2010+), Suzuki GSXR600/750 (2006+), GSXR1000 (2005+), Yamaha R1 (2002+), R6 (2006+) with more harnesses coming soon for more bikes. Shown here for the GSXR-600/750/1000 and ZX636R/ZX-10R/Z1000 Not yet listed on our website, the Woodcraft key harness can be ordered by giving MIKE a call at 866.931.6644 ext. 804. Is email more convenient? Send us a private message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! Made exclusively for race/track bikes, this harness is for the rider who isn't comfortable messing around with their bike's wiring or someone who wants a clean plug-n-play design. Installation is easy once you get the key switch removed from the triple clamp. Instructions are included but you essentially plug this into your key switch plug and the OE run/stop switch. There is no splicing or cutting to your stock harness. Retails at $45.99 Removing the key switch harness frees up some valuable space behind your top triple clamp allowing you to install steering dampers, lap timers, or GPS units. For track/race bikes only. We do not recommend installing this on a street bike. Ask about adding a keyless gas cap to your order to go completely keyless and totally eliminate the need for a key!

The Knox Track Vest V14 has a linked plate system along the entire length of the back protector that moves with your body rather than restricting movement like some other back protectors tend to do. Available today from Riders Discount, give MIKE a call to place your order!

Check out these other colors also available for the Spidi Carbo 3 gloves - Black/White Black White/Red/Green Give MIKE a call to order yours today!

New from Arai this year is the Chopper graphic on their Defiant model. The Arai Defiant Chopper features a symmetrical graphic of hand drawn choppers in silver metallic pinstriping on both sides of the lid. Available to purchase from our website, the Arai Defiant Chopper helmet is an intermediate oval head shape but also has layers of 5mm foam in the temples and cheek pads that allow you to customize the fit to your liking. If you have any questions regarding the Arai Defiant helmet or would like to place an order give MIKE a call at 866.931.6644 ext. 804. Is email more convenient? Send us a message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! The Arai Defiant has a construction that is loosely based on the RX-Q, meaning that it has all the build-quality and safety features one would expect from Arai. The outer shell is made from hand-laid fiberglass that has been shaped into a smooth, spherical shape that has been engineered to transfer stress evenly across its surface in the event of an impact. The shell also features peripheral belting in across the forehead and the patented Arai Hyper-Ridge around the base for increased strength with a low center of gravity. Underneath this shell is a multi-density EPS liner that is specifically designed to absorb impact energy in a way that is similar to the crumple zones of a modern car or truck. One area that the Defiant differs from other helmets in Arai’s line-up is the way that it manages airflow. This is because Arai’s inspiration for the Defiant was actually the latest crop of high-performance naked bikes with a slightly more upright riding position and less wind protection. Both of factors lead to a higher volume of air hitting the helmet at any given time, and Arai used its MotoGP program to develop a new type of flared chin spoiler in order to combat the issues this can cause. This addition reduces lateral movement, lift, buffeting and wind noise. A more familiar rear spoiler and pair of stabilizers at the back round out the aerodynamic feature-set at the back. Ventilation also received a significant amount of attention for the same reasons as the aforementioned aerodynamic features, and the resulting ventilation system is one of the best we have encountered. All of the vents are brand new for the Defiant and not only flow tons of air when you need it, but also create an amazingly quiet seal when closed. At first glance, the most noticeable of these is the chin vent. It has a 3-stage switch that you can use to toggle between directing air to the face, the shield, and to close it completely. Intakes on top of the head are a slick new style that close very tightly and are easy to operate with a gloved hand. Two that are easily overlooked are the vents in the shield. They look like those found on other Arai’s, but instead of venting to the forehead, the air is channeled around to the temples and ears. According to Arai, this cools the blood flowing to the brain through the temporal artery. We lacked the medical equipment to test this claim, but we can say that it does feel great to have airflow in this normally stuffy area. A Pinlock ready shield and clear insert are included with every Defiant helmet from Arai. Now available from Riders Discount, give our expert sales staff a call for any questions or if you'd like to place an order!

Yes, yes it does.

You'll never be wishing you had more pockets with the OGIO Flight Vest available from Riders Discount. There are literally pockets all over this vest and they somehow managed to put pockets in places we didn't think could have pockets. Better still, it comes with a hydration system that is stored in the back of the vest. OGIO has designed this vest extremely well and even with it loaded down, the weight is evenly distributed over your torso. You won't even notice you're wearing it. With straps and multiple adjustments points that allow you to customize the sizing, the OGIO Flight vest is able to be worn over adventure touring jackets, sport bike jackets, dirt bike jerseys, or even just a normal t-shirt (works perfect with photography gear!). This vest is not yet listed on our website however if you would like to order, please call MIKE at 866.931.6644 ext. 804. Is email more convenient? Send us a message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! MSRP at $139.99 Constructed from heavy duty 420D dobby nylon and 600D poly, this is built to last and will stand up to even your toughest adventures. Did we mention pockets yet? OGIO has pockets for your tools, goggles, lenses, and numerous multi-use pockets. The HYDRAPACK reservoir holds 2L of fluid and includes the straw and drink system. If you have anymore questions be sure to give our expert sales staff a call or leave us a comment in the thread below!

PM sent, thanks!

Always wanted a Jorge Lorenzo replica lid but didn't really want to pay the RPHA-10 price? Well now you can get the Fuera graphic at an entry level price in the HJC FG-17 available from Riders Discount. The HJC FG-17 Fuera is available to purchase on our website, if you have any questions or would like to place an order give MIKE a call at 866.931.6644 ext. 804. Is email more convenient? Send us a message though this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! What's with the logo? We'll let the man himself explain that one - “The first victory I got in 2003 in 125 in the GP of Brazil. I overtake [Dani] Pedrosa and [Casey] Stoner by the outside so in Spanish by the outside means Por Fuera. So my logo is Por Fuera. The X for the Por and the crescent for the Fuera.” Jorge Lorenzo The FG-17 is Snell 2010 approved with a neutral/round fit. Sizing is true to size based on their size chart but if you ever need help, feel free to contact our expert sales staff for any questions you may have. What do you guys think of Lorenzo's Fuera graphic?

The DID KM500R chain tool is THE best chain tool on the market today. Made in Japan, this KM500R chain tool is forged steel and is the same tool used by dealers, shops, and race teams including your very own Riders Discount race team. We can't advertise your forum price publicly, but you're definitely going to want to see what we're offering this up for. Just send us a PM to get your price. Not yet listed on our website, the DID chain tool can be ordered by calling MIKE at 866.931.6644 ext. 804 or by sending us a private message through this forum. Is email more convenient? Write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! This DID chain tool can be used for the entire chain swapping process. Able to push old pins out, press new side plates on, and rivet to a perfect flare, the KM500R does it all! The DID KM500R is a heavy duty, forged steel tool made in Japan. This does not break or snap easily like some other, cheaper chain tools. This is built specifically for shops that frequently do chain swaps, but at this price you won't want to pass up this opportunity to add it to your own personal tool box. If on the off chance you break the pin, we can order up a new one for you no problem. This comes in 6 total pieces. It's design is simple and quite genius actually. The pin and plate can be used in a variety of combinations to accomplish all three steps of removing and installing your new chain. Use the pin to push out the old rivets. Flip the pin around and use it with the chain press plate to press the new side plate on. Finally, remove the plate to flare the rivet. If you have any questions on flaring your rivet, please consult your service manual. Interested? Send us a PM or give our expert sales staff a call today!

Nicky has worn Arai for nearly 20 years and has nearly that many replica variations, all of which have been top-sellers from Riders Discount. The new Arai Nicky replica helmet is sure to be no different presenting an all new look but with a hint of familiarity. Available to purchase from our website, the Arai Corsair V Hayden replica helmet is an intermediate oval head shape but also has layers of 5mm foam in the temples and cheek pads that allow you to customize the fit to your liking. If you have any questions regarding the Arai Corsair V helmet or would like to place an order give MIKE a call at 866.931.6644 ext. 804. Is email more convenient? Send us a message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! This Starline designed lid features a green camouflage base with a white, green, and red graphic overlay topped off with a heavy metallic flake. Nicky's signature #69 is ghosted into the chin bar on both sides with lines that blend in well with the theme of the helmet. On the back you'll see his sword & shield emblem with his initials and "Let's Get It" written over wings, shield, and the stars. Available today! Ask about adding on a dark smoke shield to your order!

It is sick for sure!

A farewell design from Arai, this Corsair V Edwards features a restyled and updated version of Colin's personal favorite graphic from the 1999 season and of course, the Texas flag. If you're an Edwards fan, this is a "must have" helmet to add to your collection! Available to purchase from our website, the Arai Corsair V Edwards replica helmet is an intermediate oval head shape but also has layers of 5mm foam in the temples and cheek pads that allow you to customize the fit to your liking. If you have any questions regarding the Arai Corsair V helmet or would like to place an order give MIKE a call at 866.931.6644 ext. 804. Is email more convenient? Send us a message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! This wouldn't be a true Edwards helmet without the Texas flag present somewhere on the lid. On the 2014 replica, the Texas flag blends in perfectly with the Aldo Drudi designed graphics of the lid. Notice the Texas star front and center, just as it has been for the past few designs. The Arai Cor V Edwards 2014 replica marks the end of a replica series spanning three decades, incorporating eight different designs with 23 total color options. Be sure to call us to get the last Edwards replica helmet today! What do you think of this Arai Edwards replica? Give our expert sales staff a call for any questions or if you'd like to place an order today! Dark smoke shield sold separately.

Shoot me a PM if I can help with any questions.

Updated for the 2014-2015 riding season, the Alpinestars Megaton jacket available from Riders Discount is a durable Drystar jacket perfect for sport and sport touring riders looking for a jacket with 3-4 season capabilities. Pictured here in black/white/red, the Alpinestars Megaton jacket is also available in black, and blue/grey/red. Available to order on the website at $329.95, give MIKE a call at 866.931.6644 ext. 804 if you have any further questions or help with placing an order. Is email more convenient? Send us a message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! Constructed from durable 600D polyester fabric with water repelling surface treatment, the Megaton jacket is cut for sport and sport touring riders. Inside you'll find a removable waterproof and breathable Drystar liner as well as a removable thermal liner. CE rated armor is used in the shoulders and elbows with compartments to allow for upgraded chest and back armor such as the Alpinestars bionic series. Accordion panels are used on the shoulder blade and elbow allowing you a wide range of motion. Tons of ventilation incorporated into the jacket with intake vents on the shoulder and sleeve, and two exhaust vents on the back. This breathes quite well for being a four season jacket. Auto-locking YKK zippers used on the sleeves. Also note the zipper on the top of the channel to open up the sleeve vents. What do you think of the Alpinestars Megaton Drystar jacket? Post up any thoughts or questions in the thread below!

AGV has released the long awaited Wish helmet and it's now in stock and ready to ship from Riders Discount! Available to purchase from our website, the AGV Corsa Wish replica helmet is an intermediate oval head shape and fits true to size. If you have any questions regarding the AGV Corsa helmet or would like to place an order give MIKE a call at 866.931.6644 ext. 804. Is email more convenient? Send us a message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! The Corsa Wish pays tribute to Valentino Rossi's friend and fellow racer Marco Simoncelli. Worn at the Misano race last year the Wish helmet features Pink Floyd's legendary "Wish You Were Here" album cover. On top you'll find two robotic hands holding onto the other over a background representing earth, water, air, and fire. Valentino Rossi's dedication is very closely linked to the musical meaning of the images on the helmet. Wish you were here is an album about the absence of man, sad and lost in what Gilmour and waters define as the "society of machines”. There is no doubt that the absence of Marco Simoncelli has been felt even more strongly at his "home track" which was in fact named after him a few months after his tragic death On each side you'll find large fluorescent yellow "46" that has become a common fixture on Rossi's helmets. Developed and produced in Italy, the AGV Wish is a limited edition run of 3000 helmets. Pictured here is #1000 of 3000. Includes a clear shield, but be sure to ask us about adding a dark smoke tinted shield to your order!

The Ohlins TTX GP shock is straight off of WSBK machines. Ok not really, but it's about as close as you can get to WSBK technology for your bike. Using all new valve stacks, the compression and rebound adjustments have improved even more over the MkII. With the TTX GP, you'll get a wider range of adjustment with more consistent feedback on a lighter shock body. We have a limited number of these shocks on sale right now at $1195 shipped in the lower 48 : 2010-2014 S1000RR 2013+ 675 2006+ R6 09+ GSXR1000 11+ GSXR600/750 11+ ZX10 This is not listed on our website, but if you have any questions or would like to place an order just give MIKE a call at 866.931.6644 ext. 804. Is email more convenient? Send us a message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! The main difference between the MkII and the TTX GP are the rebound and compression valves which are straight out of the WSBK machines. Initially what you'll notice when you receive your Ohlins TTX GP shock is that you can adjust the TTX GP rebound and compression with your fingers by turning the knobs. The MkII required an allen key to make any adjustment. Diving deeper into the valving, the TTX MkII valving was quite a bit thinner and had no support at the end of the needle resulting in a needle that flexed due to internal pressure giving you non-linear changes in adjustment. The TTX GP valving is much beefier with a fully supported needle giving you more consistent changes in the adjustments. This is the same shock the Riders Discount Triumph team used to finish off their season resulting in placing as the top Triumph team. Riders Discount Triumph crew chief and MotoGP engineer, Richard Stanboli, noted that this Ohlins TTX GP shock is much improved over the MkII with an adjustment range that is more linear than previous versions. Pictured here is the Ohlins TTX GP shock off the Riders Discount Triumph 675R being serviced before the Mid-Ohio race. What this means is that each click on the TTX GP is going to have the the same change in feedback throughout the adjustment range whereas before, one click may have a smaller or greater change than the next. TTX GP is be available for most major bikes used in national racing as well as the new street bike models.

The RS-1 is one of the most popular models from Bell and at nearly 50% off MSRP this is a deal you don't want to pass up! $205 shipped in the lower 48 for this Bell RS-1 in Emblem White! We have sizes left in medium, large and extra-large ONLY. Limited stock so do not wait on this! Dark smoke shield not included. To order at this fantastic price give MIKE a call at 866.931.6644 ext. 804. Is email more convenient? Send us a message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! The Bell RS-1 is a jack-of-all-trades that comes from boiling down many features from the top-of-the-line Bell Star into a mid-range helmet. Don’t let the mid-range designation fool you though, as it punches well above its weight (especially at this sale price!). The Bell RS-1 is a SNELL M2010 and DOT approved helmet that sits in a sweet spot, both performance and price-wise. The sleek, aggressively shaped shell is made from a Kevlar/Fiberglass composite that makes it both strong and lightweight. The RS-1’s shell cuts a profile that is similar to that of the Bell Star, which results in an excellent aerodynamic balance that keeps buffeting to a minimum. Air also flows through the helmet very well. The Velocity Flow Ventilation system is adjustable and quietly keeps your head cool. Internally, the Bell RS-1 is a comfortable place to be. The lining and cheek pads feel very plush on the skin, right out of the box. They also break in quickly. An Agion Antibacterial treatment helps keep things fresh, but the lining is fully removable and washable in case things get a bit too sweaty. The RS-1 comes with a clear NutraFog II anti-fog/anti-scratch shield, which is the same as the Star. The ClickRelease shield mechanism is also shared, making for shield changes that can be done in seconds. $205 shipped, order yours today!

The Forcefield Pro L2K Evo back protector is made with NitrexEvo. NitrexEvo is a high-tech shock absorbing material that provides Repeat Performance Technology (RPT). RPT ensures that you are well protected even after multiple impacts far exceeding CE Level 2 certification requirements. This is where Forcefield shines above its competition. Give MIKE a call to order yours today!

Not just a sunvisor (SV) update on the ol' K3 helmet, AGV completely refreshed their entry level helmet with an all new design packed with features in the new AGV K3 SV helmet available from Riders Discount. Available in matte black (pictured here), gloss black, white, and a variety of graphics including a Simoncelli replica. Not yet listed on the website, if you would like to place an order or have any questions feel free to give MIKE a call at 866.931.6644 ext. 804. Is email more convenient? Send us a message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! Most noticeable on the new AGV K3 SV aside from the drop down internal sun shield is the aggressive shell shape. You'll notice this looks much like it's more expensive brothers in the Pista and Corsa. The interior has been updated as well with an all new Lycra moisture wicking liner. The ventilation has been updated as well with the most noticeable change being the addition of a central ram air intake. How do you like AGV's update on the K3? Let us know what you think in a comment below!

Thanks! I love purple chains though.