Chadz89GTA

If you use the Dayton link here http://www.dayton-fbody.com/DFBAbb/viewtopic.php?p=22359#22359 you'll see there are also GTA wheels on the car. I've had many sets of wheels on the car. So yes, I know the difference in the wheels. GTA's are cross laced and the sawblades are vette. Thus the reason I posted that the wheels that will sell with car are the ones pictured, and NOT the ones that are in the pictures with the car.

What about them? The car will sell with the wheels that are posted above which are stock factory 16inch 4 Slats, the wheels have a front offset as well as a rear offset and take a 245/50/16 inch tire. The rims has NO curb rash and only need a good polishing to look A+ again. The Vette/GTA rims are for sale in the Parts section thread that I posted.

As soon as the snow goes away and I can get in my garage I'll get more pictures of the vette wheels.

If you follow this link here: http://www.dayton-fbody.com/DFBAbb/viewtopic.php?p=22359#22359 You will find all the pictures of the engine bay that you need. The interior shots will be taken when the snow goes away. I've owned 3 3rdgens, and this is by far the CLEANEST interior I have ever seen in one. No tears in the seats, no real signs of wear ANYWHERE, dash pad is immaculate. The only problem I had with the interior when I bought the car was a busted radio pod, but I ebayed a better one so thats what resides in the car at this present time. The only real wear is the center console lid is pulling up a bit there are no cracks in it, and the console sides need reglued. If those 2 things were excluded from a rating I'd give it a 9 of 10 easy. It's the cleanest 86 I've ever seen. With a paintjob this would easily be one of the nicest 3rds on the road.

PM me about what you have.

$1,800 Up for sale is my 1986 WS6 Trans Am. Originally a 305 Computer Controlled Carb car it has been switched over completely to vac advance and a 4 Bolt main 75cc headed 350 last 3 digits on the block are 010. Highrise intake with a Quadrajet Carb. I'll list mods to it after I post a few pictures. http://img148.imageshack.us/img148/3821/carpics002wg4.th.jpghttp://img170.imageshack.us/img170/8408/carpics003us7.th.jpghttp://img341.imageshack.us/img341/9388/carpics004xr2.th.jpghttp://img139.imageshack.us/img139/184/carpics005fg8.th.jpghttp://img513.imageshack.us/img513/9020/carpics006rp6.th.jpghttp://img210.imageshack.us/img210/6112/carpics007nt5.th.jpghttp://img513.imageshack.us/img513/1963/transampics008aq3.th.jpg More images located here: http://www.dayton-fbody.com/DFBAbb/viewtopic.php?p=22359#22359 Mods are: Rebuilt 350 4 bolt main 010 block with 75cc heads Highrise Performer Q-Jet intake with Q-Jet carb Hooker shorty style headers with CUSTOM 3inch exhaust and Magnaflow Muffler, the Y-Pipe was custom made has no cats on it and is VERY loud when the Cut-Out I had put on it is open. Upgraded suspension *see below Everything electrical has been throroughly checked and replaced. MP3 CD Player with new dash/rear speakers. It will NOT be sold with the GTA wheels or tires. It will have these stock rims on it with decent tires: http://www.tacreationsusa.com/images/Wheels/8586TA.jpg If you would like the GTA rims tack on $500 to the total. These are things that have been replaced with new items since I've owned the car and have less then 3,000 miles on them. I purchased the car with 87,467 miles on the odo: New suspension all the way around that is new shocks/struts/swaybar links. Car has brand new silverstar headlights as well as every marker light/tail light replaced. New tranny mount as the one that was in it was shot. The paint is a typical 22 year old paintjob and could use a little attention. There is VERY VERY light surface rust starting but nothing you couldn't fix with a little elbow grease. The only two bad things about this car are it's going to need brakes in the near future, the brakes that are on it now are NOT bad they just don't respond as well as you would have on a newer car. It's going to need a carb, the carb that is on it needs rebuilt badly. The car starts and runs fine, it just runs VERY VERY rich. It has a posi 2.77 9bolt borg warner rearend in it. I have the option code sheet, it is infact a WS6 car, if you would like a copy of it let me know I can PM you the options as my camera keeps blurring it up. Sorry for this being lenghthy I'm just trying to give you a very good idea of this car and what I've done to it. I don't want to sell the car but if you see my sig...I've put myself in debt so this baby has to go. THIS CAR WILL RUN AND DRIVE ANYWHERE!!!! IT RUNS FINE NOW!!! It just gets VERY VERY poor gas mileage. If you have any questions please PM me. Thanks!!

Up!

It tells me I have records, but you have to have a log on to see what they are. Thanks for checking though.

Just bought my Z28 and was wondering if anyone had access to Carfax it for me. Thanks in advance!! Chad

I live in Moundsville, WV my brother lives in Dayton, OH so I frequent those 2 towns. PM'd about the headliner.

He's still on stock rear and stock trans. I'll let him chime in whenever he sees this post, ask Anthony or any of the COFBA guys about his car.

Gillbot on here has his 02 Z28 with just a cam/headers/intake/tune doing 400rwhp exactly, and he never has to refill the bottle.

They will fit S10's Camaros/Firebirds and whatever boltpattern those are. The backspacing is the issue. They would be decent daily wheels and for $50 I don't know what your expecting in the case of clear delamination, as far as I know these would need a VERY good cleaning but would still be a nice set of wheels to roll around town with. The only reason I stopped using them was to put my GTA wheels on and now I'm selling the car they were mounted on as I bought the car in my sig :-P

Item #1: Thirdgen F-Body T-Top Headliner. This has NO and I mean NO waterdamage. The fiberglass is in GREAT shape there are a few places that need minor repair and it will need new fabric. But other then that it is in GREAT shape. Post in here for pictures and I'll email them to you as they are higher res and would prefer not to host them. $100 OBO. Item #2: 17 Inch Corvette C4 I believe? Sawblade Wheels. These wheels have tires mounted on them but I would only recommend nice dry day driving on them. They have little to no tread left BUT still work fine $50 It's what I paid for them so price is FIRM Pics: http://img120.imageshack.us/img120/5082/carpics002jn5.th.jpghttp://img120.imageshack.us/img120/695/carpics006uc8.th.jpg Item #3: 16 Inch Firebird 93ish Type wheels. Have tires mounted on them but have no idea if they hold air. These would make good winter rims or junk rims for drag tires. $50 Pic of the type of wheel: http://www.tacreationsusa.com/images/Wheels/9597FTA.jpg Thanks for looking!!!

You can play copied games

In order for the warranty to be honoroed it's sent out and since you've modded it I hardly see that the warranty will hold true. Mines also modded and when I tried to replace it after it screwed up from the Super Mario Galaxy update I ended up have to buy another one since they knew I opened the case when it was sent to the warranty company. Just some FYI

Priced to move! $1,000 OBO!!!

It might not hurt to post the actual information about the car in here.

Shame they aren't using the Concept Firebird Edit: The photoshopped fake.

What I have here is my beater/winter truck. It has a 2.9L V6 122k on the odo. 4 wheel drive is pushbutton and works fine, 4 speed auto with o/d also has cruise. Installed is keyfob'd remote control car starter that also has unlock and lock buttons that work flawlessly. It's red with silver and omega red primer on the bottom. Theres a little bit of rust but it passes the WV dealer inspection so it's not really that bad. I wouldn't hesitate to drive this truck ANYWHERE in ANY TYPE OF WEATHER, it has NEVER left me stranded EVER it is one tough little rig And here are the pictures. New tires also. $1,000 OBO http://img410.imageshack.us/img410/3568/dsc00005mn7.th.jpg http://img404.imageshack.us/img404/3722/dsc00006io3.th.jpg http://img404.imageshack.us/img404/9594/dsc00008gg9.th.jpg http://img410.imageshack.us/img410/4127/dsc00007yw7.th.jpg Any questions feel free to PM or post in here Edit: Well imageshack took a poo on me so if you need pictures, lemme kno your email and I'll email them.

I built this rig: Abit IP35-E Beta Bios 14.05 Crucial Ballistix DDR2-800 2GB (1GBx2) Runs @ 2.2v 5/5/5/16 500mhz Intel Core2Duo E6550 @ 3.5Ghz 1.425v Thermalright Ultra-120 eXtreme HP w/ Cooljag Fan ATi X1950XTX 512MB PCIe GDDR4 @ 729 Core/1116 Mem HR-03 Rev.1 VGA Cooler w/standard 80mm case fan Netgear GA311 Gigabit LAN XClio 500W GoodPower PSU For under 700$ total. http://www.anandtech.com forums for sale/trade rules

How do you figure? The Pro comes with HDMI now so the only difference is the 120gb hd.

WOw just realized I'm near the work speeds here, go comcast!

http://www.speedtest.net/result/210709776.png Home

If it were McGyver it would definately have a few paper clips with some tin foil attached. http://img140.imageshack.us/img140/7360/wwmdxu2fn7.th.jpg