Solo Vette

The chevy store/ old Dodge location. I think anyway, that is where the pictures of the car were taken.

Thanks Craig.

Still available

He didn't happen to work at Graham Ford before did he?

Thank you for the offer, I should have specified I am looking at a used vehicle.

Damn it! I want to see this.

I am looking at buying a car from Byers Dublin, however I know noone that works there any longer or if I do I am not aware of it. Just wondered if anyone knew someone that worked in sales, or preferably a sales manager that I could contact. Thanks for any help.

Thanks Rob. Oh Scott, I did not get bored with it. I am just on the road so much now that I do not have any time to even think about which way I want to go with it.

Yeah I clicked the button before I finished the posting. The pic rob put up is what it looks like now. The tires are brand new 245 front/275 rear. Thanks for the pic upload Rob.

I am going to list this car before I trade it in. 1986 Ford Mustang GT, the car has a 306 cu in(unsure of the components in the bottom end) Powerdyne BD11A with 9lb pulley. 345HP/370 TQ on the dyno. Engine -Ported heads -Cam unsure of which, was told it was a B cam -BBK 70mm throttle body -Nitrousworks plate NOS system, install needs finished. Painless 4 switch panel -UPR powerpipe with Lightning 90mm mass air flow sensor -60lb injectors -Steeda EGR delete -Comes with longtube headers and h pipe as well as GT40 non P heads and explorer intake Transmission/Driveline -Tremec TKO transmission -3.73 gears Suspension/Brakes -Eibach lowering springs -Koni adjustables up front KYB in the rear -95 Mustang Spindles with 13in Cobra brakes up front still drum in the rear -New ON3Performance 28 spline heavy duty 5 lug axles in rear. Body -87-up quarter glass and rear GT spoiler -03 Cobra wheels (actual Ford part just aftermarket caps) -Dent on top of right front fender, have the new fender in primer. -Paint is decent, and so is the body. -Floorpans are solid and car has subframe connectors. Frame rails are solid, and Rob did a hell of a job with the wiretuck in the engine bay. The pictures are from the car before most of the changes. I am sure there are some other things I am forgetting. Any questions just ask. $6500.00 http://c2.ac-images.myspacecdn.com/images02/111/l_17d1fa48c711432ea2c337653cb1b0cd.jpg http://c1.ac-images.myspacecdn.com/images02/70/l_c94f7176e8c74aca80c7904c5dd0f650.jpg http://c2.ac-images.myspacecdn.com/images02/99/l_97fc45187a3b4dc092b02f1abd194605.jpg http://c1.ac-images.myspacecdn.com/images02/68/l_3224c1552cb44a80b01d9b99f0ab8338.jpg http://c3.ac-images.myspacecdn.com/images02/73/l_55d2b13cca7c4332bee8cca292b991da.jpg http://c3.ac-images.myspacecdn.com/images02/110/l_6ba13d97dcab4fc3b543727ce15718fe.jpg There are also a couple of pics in my album on here. Like I said any questions just ask.

Clear Ohio title, it has been here for a little while. Makes a 30min drive one way and back everyday. Slight driveline vibration, I have been in more than one of these that has felt the same way. The car would make the drive as it sits. Extra parts include a spare distributor, spare carb, spare sunroof panel, some other little odds and ends. Spare set of wheels, I think the originals.

Bump $500. Anyone.

$550.00 Just need this to go. One last effort. Anyone, good solid car!

bump, still available $600

Yeah they are. Well my car is running so I may be there.

Well I just thought that maybe you did. I thought taking lunch money paid better?

Alex, so are you buying or what? Will you be providing cookies also? If I make it back in time I'm in.

There are other ways of getting the title if you do not get it back. They are a pain in the ass but it can be done. Yeah I know how you feel I am inn the same boat on a deal too. I would ask how far away is this, it might be worth the trip to drive to knock on the door, however I would get him early in the day. That way if he says I sent it, you can go with him to the title office, he can get a duplicate, and then he can sign off on it there, and you can get it notarized on the spot. Good luck!

bump noone at $600? Worth a try

Yeah, because I am not a big RX-7 guy, I just found a solid one and was going to do a 5.0 swap, however I do not need to start another project. I do not know what model it is, that is why it is not listed. The car has rear drum. The car is very solid underneath. Needs some body and interior work. A little noise coming from the brakes in the rear, and the exhaust I believe I mentioned.

All of that is covered in the original description I thought. The quarter is dented from the wheel well back, should be able to tell from the pic, I tried to show the damge. It just starts as a crease and the majority of the damage is just the corner. The car is manual option car. The underside is clean, this car has not been in Ohio very long.

Today this car needs to go $600.00. Somebody come and get this car. Very solid good project or great running daily driver. Anyone? Price is good today or tomorrow only!

Still available. Needs to go, $800.00 obo.

Your car will be bad ass, I was on the phone with a customer, having a Paul moment, forgive me. Queer? Not unless you want me to be you fag!

Tyler, one thing I forgot to post here is that I love the fact that your shot will be bad ass, my car needs a strap now.... So now that you hasve love, am I still what you referred to earlier? So Matt's shit is bad ass, well it is I met him on the last Track day, and he was an ok individual, and his truck is bad ass. OK so I gave him a blumpkin in the porta john, gonna make a big deal out of it?