Darth_Emma

I bought one of the Wedco spouts that was linked above on ebay. Worked great on a little gas can I bought at Advance Auto Parts. However, you can go to Jegs and buy a "utility jug" from them and a spout. (They can't call them fuel jugs because then they would be illegal to sell as such.) They work great. But of course, I'd never put fuel in them . I have several of those.

Sold!

Bump for a great deal.

FS: Billet Strut Tower Covers for 5th Gen Camaro made by Showstopper. http://farm9.staticflickr.com/8243/8493112725_63438745d7_b.jpg http://showstopperaccessories.com/products/Billet-Strut-Caps-%252d-Plain.html# They are in excellent condition. We are using camber plates now for the coilovers, so they don't fit on my car. Here they are in my engine bay. http://farm2.staticflickr.com/1383/5167060543_6458e07904_b.jpg Showstopper sells them for $125 plus $15 shipping ($140 total). I'm asking $75 if you pick them up at IPS Motorsports (or $80 shipped), as is.

Still for sale.

Sold!

They will not fit a c6. Sorry.

I have a set of Pfadt adjustable coilovers for 5th Gen. Camaros that were installed on my car by IPS Motorsports summer (2011). They have less than 2000 miles on them and are in excellent condition. http://farm9.staticflickr.com/8432/7651812422_5f33506155_b.jpg http://farm9.staticflickr.com/8016/7651811474_73733ec605_b.jpg http://farm8.staticflickr.com/7256/7651807924_ddfd587754_b.jpg Note: I took the following 2 pictures last week. But, I am NOT selling the camber plates (even though they are in the pictures below). You will need to get the shock mount bushings for the rear uppers from Pfadt. http://farm9.staticflickr.com/8466/8447692633_40e068b5b8_o.jpg http://farm9.staticflickr.com/8375/8448779282_5b0cd9e94a_o.jpg They are Pfadt's first generation coilovers for the 5th Gen. Camaro. $1400 if you pick them up at IPS Motorsports, as is. (They cost about $2400 when new.) They are off the car and ready to go!

SOLD!

bump.

Sold. I'm selling a set of Custom Billet Valve Covers. http://www.noonanraceengineering.com.au/images/products/product27_1_090603142634.jpg http://farm9.staticflickr.com/8021/7694484170_c655ac9008_o.jpg Description: Our tall height range of LS Series engine valve covers are designed with the high performance street & outright race engine in mind. The main advantage of our tall series LS rocker cover is its ability to fit over most types of aftermarket rocker-gear without the use of a spacer. Other benefits include factory style baffled breathers and enough material at the front and the back of the covers to add -8 fittings for race style breather systems. Factory style baffled breather Front and rear bosses for adding larger breather fittings Integral bosses for mounting ignition coils directly to cover O-ring seal to cylinder head CNC machined oil cap with o-ring seal Adequate clearance for most aftermarket rocker gear They were on the car for dyno-testing only. They are made by Noonan Race Engineering. http://www.noonanraceengineering.com.au/_products.php?g_SubcategoryID=29 They can also be seen here: http://granatellimotorsports.com/products/Tall_Height_LS2_L98_LS3_LS7_w_Coil_Mounts-561-0.html They do not include the coil covers, but you can get those from Granatelli Racing. However, I have a few pictures of them with the coil covers on them... http://farm8.staticflickr.com/7280/7720591510_3e285ae1ac_o.jpg http://farm9.staticflickr.com/8077/8451257370_eb01562471_o.jpg I took this one when they were assembling the engine. Only 2 of the coil packs are on this side, but it's the only other one I have. http://farm8.staticflickr.com/7254/7694487758_ec65c66061_o.jpg I'm asking $475. You can pick them up at IPS Motorsports. (The Hogan intake manifold in the above picture is also for sale here: http://www.columbusracing.com/forums/showthread.php?t=110036)

We are going with an All Pro intake that is taller. I'm going to have to cut a hole in my hood.

SOLD!! Hogan's Racing Manifolds custom-made LS7 sheetmetal intake manifold. Here is the Hogan website: http://www.hogansracingmanifolds.com It was on the car for dyno-testing only, so it is essentially new. Includes fuel rails. It is set up for direct-port nitrous injection and will work with any system with 1/16" NFT nozzles. Fits a stock deck height block with LS7 heads. This a beautiful piece. The plenum has been polished to a high shine and the fuel rails have been anodized black. Here are a few pictures. Also, it fits perfectly under the stock Camaro hood. http://farm8.staticflickr.com/7280/7720591510_3e285ae1ac_o.jpg These were taken before it was polished and fuel rails anodized: http://farm8.staticflickr.com/7122/7085243679_10549276bb_o.jpg http://farm8.staticflickr.com/7226/7085243951_a4f81eb3d7_o.jpg These were taken during engine assembly after it was polised and fuel rails anodized. http://farm9.staticflickr.com/8021/7694484170_c655ac9008_o.jpg http://farm9.staticflickr.com/8142/7651858838_6cc2e365a0_o.jpg Here is a view of the back of the manifold taken during engine assembly. http://farm8.staticflickr.com/7267/7550527450_44992d08e4_o.jpg I am selling it because we have decided to go with a different style intake manifold to go with the new drag racing heads on my car. Asking $2900 if you can pick it up at IPS Motorsports, or best reasonable offer. It is off the car, all wrapped up, and ready to go.

Can't wait. I really like Robert Downey, Jr.

I also took a video from the tower. Mark should have it posted on his channel soon.