Search the Community

Bull-It SR6 Carbon Jeans and Bull-It SR6 Bondi Jeans Check out why Bull-it jeans, aren't your typical riding jeans! Regular fit with .5 - 1 in. flexibility on the waist. Straight leg will fit inside or over boots. 12. oz blue denim, 100% cotton outer. Traditional 5 pocket design. Black leather belt patch with embroidered Bull-it logo. Covec sew in label in rear right hand pocket. Brushed metal matte finish button and front pocket rivets. Side and rear seam construction triple stitched. Genuine YKK locking front zipper. Inside waistband layer with Bull-it branded printing. UV laminate protector inside. Micro climate inside – 1mm of airflow using Covec structure and cool mesh liner, keeps you warm when it’s cold and cool in the summer. Covec thermal barrier inside – prevents heat transfer from road friction. 60 percent internal cover of Covec impact abrasion prevention layer. Knee and Hip armour pockets for optional CE 1621 approved protectors. Water repellent finish. Bull-it SR6 Carbon Jeans: $179.95 http://www.ironpony.com/ipd/pi.asp/ImageName/SR6_CARBONJ.JPG/Brand/Bull-It-Jeans/c2/Pants-and-Chaps/c3/Riding-Jeans/c1/Street-Products/KitKey2/Bull-It-SR6-Carbon-Jeans Bull-it SR6 Bondi Jeans: $179.95 http://www.ironpony.com/ipd/pi.asp/ImageName/SR6_BONDIJ.JPG/Brand/Bull-It-Jeans/c2/Pants-and-Chaps/c3/Riding-Jeans/c1/Street-Products/KitKey2/Bull-It-SR6-Bondi-Jeans Web: www.ironpony.com Phone: 877-799-7669Store: 5436 Westerville Road, Westerville, Ohio

WINTER SALE 2017 Quantities, sizes, and colors are limited so don't wait long! Suits, helmets, and combo packs! Check them all out below and give MIKE a call at 866.931.6644 ext. 804 or send him a message to place an order! Is email more convenient? Feel free to write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! All pricing includes free shipping in the lower 48 states. If you buy an RST CPX suit and one of the Bell Race Star Carbon helmets below at the same time we will save you an additional $25! 2016 RST CPX-C Leather Suit - MSRP $887.99 SALE $419 Available in the following: Blue 40/50 (1 left) Flo Red SOLD OUT White 40/50 (2 left), 42/52, 44/54 Flo Green SOLD OUT Bell Race Star Carbon Helmet - MSRP $749.99 SALE $349 with FREE dark smoke shield! Triton Black/Silver X-Small (5 left) X-Large Bell Race Star Carbon Helmet - MSRP $749.99 SALE $349 with FREE dark smoke shield! Triton Blue/Yellow X-Small (7 left) Small (5 left) X-Large 2X-Large (6 left) Bell Race Star Carbon Helmet - MSRP $749.99 SALE $349 with FREE dark smoke shield! Triton Red X-Small (2 left) Small Bell Race Star Carbon Helmet - MSRP $749.99 SALE $349 with FREE dark smoke shield! Tracer Gloss White SOLD OUT Bell Race Star Carbon Helmet - MSRP $749.99 SALE $349 with FREE dark smoke shield! RSD Chief X-Small (2 left) RST Mens Tractech Evo Race Leather Gloves MSRP: $139.99 SALE: $75.00 LIMITED SIZES/COLORS LEFT Black XXL (4 pairs left) Fluorescent Green (yellow) SOLD OUT Red XXL (2 pairs left) White SOLD OUT

Bell has released all new 2014 colorways for their Star Carbon line including this graphic from Chris Wood of Airtrix, the Airtrix Boogie. What’s most noticeable on this particular graphic is the mixture of gloss and matte finishes showing off the carbon weave underneath. The gloss red, grey, and silver graphics are separated by a gold flake pin stripe. As with the previous Bell Star Carbon helmets, this version uses an outer shell that is made from 100% carbon fiber. Bell spent a great deal of time engineering the shell to be not only lightweight and strong, but very aerodynamic as well. What they came up with was an angular shape with a uniquely contoured spoiler, both of which make this helmet extremely stable and resistant to buffeting. Air is also directed into the variety of strategically placed vents at the front in order to push warm, stale air out through the exhaust vents at the back. All vents are independently adjustable so that you can dial in the ventilation for a variety of conditions. Another feature that goes unchanged is the shield system. The Star Carbon uses their fog and scratch resistant NutraFog II face shield in order to keep your view clear. It’s also treated with a potent anti-UV coating so that you don’t have to worry about your face being burnt red after a day’s ride in the sun. Bell’s 3Mode Shield allows you to quickly lock the visor down, crack it open for added ventilation and swap out faceshields with no tools required. And don’t forget to ask about a Bell Transitions SolFX Photochromatic faceshield available from Riders Discount. These visors have the same great benefits of the included unit, but also change their tint based upon lighting conditions. They darken quickly (~10 seconds) when the sun is out for squint-free daytime riding. If you’re interested in the Bell Star Carbon Airtrix Boggie, just get in touch with MIKE by calling 866.931.6644 ext. 804 or send an email to FORUM at RIDERSDISCOUNT dot COM and we’ll get back to you right away!

This hi-viz, sharpie freehand styled Bell Star Carbon Tagger Trouble graphic is available today from Riders Discount. Dark smoke shield sold separately. Note: this is a hi-viz yellow graphic. The Bell Star Carbon Tagger Trouble helmet is available to purchase through our website. If you need help placing your order, or have any questions about the product, feel free to give MIKE a call at 866.931.6644 ext. 804. Is email more convenient? Send us a private message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! Fit is true to size with an intermediate oval head shape. Worried about ordering the wrong size? Don't worry, Riders Discount has an easy returns and exchanges policy. The Star Carbon helmet is Bell's top-shelf helmet with an ultralight carbon composite shell that is designed to be worn in a 3/4 or full tuck position. Built for the racetrack, this is super light weighing in at around 3.5 lbs and flows a massive amount of air keeping you calm, cool, and collected when riding at the track or in the canyons. This Bell Star Carbon Tagger Trouble is one of those graphics that you'll keep finding new things the more you look at it. Overlayed on the carbon fiber shell, a hi-viz yellow sharpie freehand graphic incorporates a bit of Bell's history. The "54" is for the year Bell started. "Choice of Professionals" is one of Bell's original slogans. White outlines the hi-viz yellow and chrome leaf accents are used on the side and in the back. Order your Bell Star Carbon Tagger Trouble helmet from Riders Discount today! Give us a call or send us an email if you have any sizing questions.

The Bell Bullitt Carbon RSD Bagger helmet offers that old-school, retro look with modern technology and safety standards. Available today from Riders Discount, the Bell Bagger comes with a dark tint flat shield in the special edition RSD Bagger graphic shown here. Dark smoke flat shield included. The Bell Bullitt Carbon RSD Bagger helmet is available to purchase through our website. If you need help placing your order, or have any questions about the product, feel free to give MIKE a call at 866.931.6644 ext. 804. Is email more convenient? Send us a private message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! Fit is true to Bell's size chart with an intermediate oval shell shape. Worried about ordering the wrong size? Don't worry, Riders Discount has an easy returns and exchanges policy. What do you get with the Bell Bullitt Carbon lid? You get the look of the standard Bullitt helmet but with a carbon fiber shell shaving nearly half a pound off the standard shell coming in at just under 3lbs. The Roland Sands Design graphic itself is a bit old school biker with a mix of matte and metallic gloss graphics overlaid on top of each other with a gold pinstripe accent throughout the lid. Check it out for yourself by ordering the Bell Bullitt Carbon RSD Bagger helmet from our online store or by giving us a call or email to purchase your new lid today!

It took Icon six years to update the Airframe helmet, and they left no stone unturned when it came to its successor, the Airframe Pro. Just when we thought things couldn't get any better, Icon created the aggressive-looking Airframe Pro Ghost Carbon version. As Icon puts it, the Airframe Pro is "Angled for Attack." The Airframe Pro Ghost Carbon Helmet is constructed of lightweight and durable carbon fiber. The carbon fiber shell is handmade and has a rubberized finish. Weighing only 3 lb 3 oz, the carbon helmet is even lighter than the original Airframe Pro. The ventilation system built into this helmet is better than its predecessor. It features vents on the jawline and chin, upgraded temple vents that reduce noise, two rear vents, and one horizontal vent in the back. The rear wing works with the rear vents to make the helmet more aerodynamic and reduce lifting in the tuck riding position. Perhaps the most impressive part of the Airframe Pro is the interior. Unlike any other helmet in the industry, this helmet has a five piece comfort liner that is completely customizable. The snaps that hold in each piece were designed to eliminate pressure points. The pads are made with Icon's Hydradry, a moisture wicking material that allows air to flow through the helmet. You can customize the Airframe Pro with Icon's Pro Liner Sets, sold separately. This helmet is equipped with Icon's Prolock Positive Shield Locking System. It comes with a Fog-Free Icon Optics Shield with Rapid-Release System, as well as Dark Smoke Icon Optics Tracshield with Tear-Off Posts. MSRP $600.00 The Icon Airframe Pro Ghost Carbon Helmet is designed for intermediate oval and long oval head shapes, and is both D.O.T. and ECE 22-05 certified. If you have any questions about the product or would like to place an order, feel free to give MIKE a call at 866.931.6644 ext. 804. Is email more convenient? Send us a private message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away!

Icon's lightest helmet yet, the Icon Airframe Carbon RR is available from Riders Discount today in pink pictured here. Ladies, this is a solid helmet with superior ventilation and it's super light at just over 3 lbs for the medium sized helmet! Place an order through our website here. If you have any questions or need help ordering feel free to give MIKE a call at 866.931.6644 x 804. Is email more convenient? Send us a message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! While this is Icon's lightest helmet yet, the Carbon RR still meets DOT and ECE 22-05 safety and testing standards. The aerodynamic elements on this lid all serve a purpose. An incredibly stable helmet at speed, this also flows an incredible amount of air. This Icon helmet fits true to size with a medium oval shell shape. Worried about sizing? Give our expert sales staff a call for any questions or concerns you may have. Laid on top of the carbon shell is a striped marble like finish with pink pinstripe accents. Includes an Icon fog-free dark smoke Proshield with every helmet. Give us a call to order yours today!

The helmets out of Bell's Star Carbon lineup are arguably some of best helmets on the market today and with this Star Carbon Airtrix at $279 shipped in the lower 48, this is a steal you simply can't resist! Get yours from Riders Discount by calling MIKE at 866.931.6644 x 804 today! Is email more convenient? Send us a message through the forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! Available in limited quantities, you don't want to miss out on this smoking deal! Currently available in XS, SM, LG, and 2XL (down to the last 2XL) From the creative mind of Chris Wood from Airtrix, this Airtrix Boogie lid fades from gloss to matte black while showing off the gorgeous carbon fiber shell. As with the previous Bell Star Carbon helmets, this version uses an outer shell that is made from 100% carbon fiber. Bell spent a great deal of time engineering the shell to be not only lightweight and strong, but very aerodynamic as well. What they came up with was an angular shape with a uniquely contoured spoiler, both of which make this helmet extremely stable and resistant to buffeting. Air is also directed into the variety of strategically placed vents at the front in order to push warm, stale air out through the exhaust vents at the back. All vents are independently adjustable so that you can dial in the ventilation for a variety of conditions. $279 shipped, orders yours today!

A modern twist on a classic style, the Bell Star Carbon Dunlop helmet is in-stock and ready to ship from Riders Discount today! The Bell Star Carbon Dunlop helmet is available to purchase through our website. If you need help placing your order, or have any questions about the product, feel free to give MIKE a call at 866.931.6644 ext. 804. Is email more convenient? Send us a private message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! Fit is true to size with an intermediate oval head shape. Worried about ordering the wrong size? Don't worry, Riders Discount has an easy returns and exchanges policy. This is actually a Dunlop replica helmet helmet from William Dunlop, nephew of the great Joey Dunlop. This Dunlop replica from Bell incorporates the carbon fiber shell into the design of the helmet. This isn't a simple white helmet with black stripes, this is so much more than that! Check out the matte carbon fiber peeking through with the gloss white laid on top. Snell 2015 and DOT certified, the Bell Star Carbon is designed to be worn in the 3/4 to full tuck position. Available at Riders Discount, order your Bell Star Carbon Dunlop helmetonline or contact us if you need help with sizing or placing your order.

Eye-popping, head-turning, attention-grabbing, whatever you want to call it, the Bell Star Carbon Fillmore replica helmet looks fantastic and it's available today at Riders Discount! Dark smoke shield sold separately. The Bell Star Carbon Fillmore replica helmet is available to purchase through our website. If you need help placing your order, or have any questions about the product, feel free to give MIKE a call at 866.931.6644 ext. 804. Is email more convenient? Send us a private message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! Fit is true size with an intermediate oval head shape. Worried about ordering the wrong size? Don't worry, Riders Discount has an easy returns and exchanges policy. This one of a kind replica helmet is based on Chris Fillmore's helmet that he wears in the MotoAmerica series riding for the KTM Superbike team. Starting off with a silver base layer and a ton of metallic flake, there is a mix of high contrasting yellow and KTM orange accents surrounding the helmet. What's unique about this helmet is the use of a greenish-yellow color that reminds us of the goo like you see in comic books. On the back is Chris' race number in silver and signature. Available today from Riders Discount, order your Bell Star Carbon Fillmore replica online now! If you have any questions, feel free to contact us and we'll gladly help you out.

One of our most popular selling off road helmets, this Fly Racing F2 Pro Carbon helmet is Snell 2010 approved carbon fiber Kevlar composite helmet and available from Riders Discount in numerous different graphics including Fly Racing Trey Canard replica graphics. Check out all the F2 Carbon graphics here. Shown here is the Dragon Alliance. If you would like to place an order, the Fly Racing F2 Pro Carbon Dragon Alliance helmet is available to purchase from our website. If you have any questions regarding the F2 Pro Carbon helmet or would like to place an order give MIKE a call at 866.931.6644 ext. 804. Is email more convenient? Send us a message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! Replacement parts and optional accessories such as a carbon fiber vent intake and breath guards are also available from us. Just give us a call if you need anything. Developed in-house, the F2 Carbon uses a composite shell constructed from premium carbon fiber and Kevlar creating an extremely strong yet lightweight shell. Our medium sized helmet weighed 3.25 lbs (1474 grams) on the shipping scale. Fly Racing really worked hard to make this one of the best ventilated helmets on the market. This is a lid that you can actually feel all those vent holes making a difference keeping you cool on the trails or at the track. Over four intake vents with two chimney vents utilizing air channels built in to the visor to direct air right into those chimney vents. Also note the ventilation to help keep your goggles fog-free. Two large exhaust vents out the back pull all the hot air out keeping the air flowing through the helmet. Aluminum visor screws and stainless steel rivets are used on the F2 Carbon. This premium dirt helmet is race proven by top level riders in both supercross and motocross with names such as Andrew Short and Trey Canard. Give our expert sales staff a call if you have any questions or would like to place an order!

Bell Race Star Carbon - $275 obo + Buyer pays shipping from 44601 Size - XL Build Date - 06/2016 Comes with 'PROTINT' transition shield, Red Shield, Clear Shield and spare 40mm Cheek Pads. Liner new for 2020 with 35mm Cheek pads.