Guest infamous me 235 Posted August 2, 2004 Report Share Posted August 2, 2004 Will a B&M FPR work? A shop told me if I set my pressure at 40 I will be fine. Can't I just use this one I have or should I buy one from like Buschur Racing or something? Thanks, Cody Quote Link to comment Share on other sites More sharing options...
Guest mudbutt Posted August 2, 2004 Report Share Posted August 2, 2004 as long as it is an fpr and not an fmuit will work. So will just about any one from many other companies (aeromotive,sx,aem,etc) dont just "set it to 40" set it for whatever your stock fuel pressure is, which may be 40 unless you plan on messing with other stuff(tuning). The buschur and some other units will bolt right in, making install painless. A universal regulator will require an adaptor to convert your rail to an AN fitting, lines, etc. HTH Quote Link to comment Share on other sites More sharing options...
Guest infamous me 235 Posted August 2, 2004 Report Share Posted August 2, 2004 it's a "B&M CammandFlo Fuel Pressure Modifier" Quote Link to comment Share on other sites More sharing options...
el aguila Posted August 2, 2004 Report Share Posted August 2, 2004 B&M only raises fuel pressure, not lower it. Quote Link to comment Share on other sites More sharing options...
nurkvinny Posted August 2, 2004 Report Share Posted August 2, 2004 Originally posted by el aguila: B&M only raises fuel pressure, not lower it. Eh? It's adjustable from 20-something lbs to 60lbs. Quote Link to comment Share on other sites More sharing options...
BiG BeN Posted August 3, 2004 Report Share Posted August 3, 2004 i had a command flo on my old honda that worked well enough. it's a slight pain in the nuts to install,and you total your stock unit in the process.but overall i had a good experience with it. Quote Link to comment Share on other sites More sharing options...
Guest mudbutt Posted August 3, 2004 Report Share Posted August 3, 2004 isnt command flow a fmu, if so that isnt needed on a car that is already turbo Quote Link to comment Share on other sites More sharing options...
Rotarded1647545491 Posted August 3, 2004 Report Share Posted August 3, 2004 Be careful with the fittings you use with a FPR. Some FPRs, such as Aeromotive and SX, use a shorter adapter/fitting than your basic AN fittings. The AN fittings will work, but have to be ground down (shortened at the beveled end) to keep from RESTRICTING fuel flow. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.