Guest FBody Addict Posted July 27, 2004 Report Share Posted July 27, 2004 Got valve lash adjusted, but shouldnt there be oil flowing down the top of the rocker arms or will the assembly lube i used block the oil flow until it gets hot enough to dissolve it and then the oil will flow correctly Quote Link to comment Share on other sites More sharing options...
Dave1647545494 Posted July 27, 2004 Report Share Posted July 27, 2004 where did you put assembly lube? if you blocked the pushrod holes up oil won't come out Quote Link to comment Share on other sites More sharing options...
Guest FBody Addict Posted July 27, 2004 Report Share Posted July 27, 2004 put it on the ends of the pushrods like the manual told me to heated up and oil started flowing, guess the lube just needed to get hot to thin out should i not do that in the future? Quote Link to comment Share on other sites More sharing options...
Dave1647545494 Posted July 27, 2004 Report Share Posted July 27, 2004 I never do. put the pushrods in a pan of clean oil if you have them out and then pour a little oil over the valve train when your done. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.