1qwk767 Posted February 2, 2005 Report Share Posted February 2, 2005 My friend has an 89 Chevy Silverado Fullsize with a 350/700r4 combo that he pulled out, he installed a 454/400 combo out of a Winnabego(sp) motor home and wants a custom made driveshaft does anybody on here do that or find some to do that if so post back here, thanks alot Mark Quote Link to comment Share on other sites More sharing options...
Dave1647545494 Posted February 2, 2005 Report Share Posted February 2, 2005 ok he needs the yoke that bolts the rearend and the yoke that goes in the transmission. these can be purchased at jegs or found in the junkyard install both yokes on the truck with the ujoints in them and get an exact center to center measurement. then take the old driveshaft to a shop like columbus joint and clutch and they can shorten or extend your driveshaft and balance it. hth Quote Link to comment Share on other sites More sharing options...
1qwk767 Posted February 2, 2005 Author Report Share Posted February 2, 2005 thanks alot man appreciate the help Mark Quote Link to comment Share on other sites More sharing options...
smokin5s Posted February 3, 2005 Report Share Posted February 3, 2005 Driveline one did mine... they are pretty reasonably priced... unfortunately like allot of machine shops, the guy that answered was an asshole, but the end result is they did a great job and in a timely manner. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.