black00ws6 Posted April 1, 2004 Report Share Posted April 1, 2004 Apten performance has moved to Cincy. They will be doing custom tuning I think starting in May once they get their in-house dyno. Just an FYI Quote Link to comment Share on other sites More sharing options...
Buckeye1647545503 Posted April 1, 2004 Report Share Posted April 1, 2004 we have two dyno's on here that I have heard good things about why are they worth the drive? Quote Link to comment Share on other sites More sharing options...
black00ws6 Posted April 1, 2004 Author Report Share Posted April 1, 2004 Because they work on and tune the new cobra's all the time rather than have someone around here that has no tuning experience. Quote Link to comment Share on other sites More sharing options...
Stallion Motorsports1647545491 Posted April 1, 2004 Report Share Posted April 1, 2004 Paul's Automotive Engineering is also in Cincy. Mustang only shop with dyno and full tuning capability, just an fyi. Tom Quote Link to comment Share on other sites More sharing options...
Boost-n-Juice Posted April 1, 2004 Report Share Posted April 1, 2004 Big props to the LaSota's Rob and Don, they did an awesome job on my stang and they are local. graemlins/thumb.gif Quote Link to comment Share on other sites More sharing options...
JaSSon Posted April 1, 2004 Report Share Posted April 1, 2004 I know RL can tune a mustang. Brian (mobilechassisdyno) also has a dyno and is very good w/mustangs. Both are local. Quote Link to comment Share on other sites More sharing options...
Buckeye1647545503 Posted April 1, 2004 Report Share Posted April 1, 2004 Originally posted by Bitch Gettin Drop-top: I know RL can tune a mustang. Brian (mobilechassisdyno) also has a dyno and is very good w/mustangs. Both are local. those were the two I was talking about, I have heard good things about both Quote Link to comment Share on other sites More sharing options...
turbomark Posted April 2, 2004 Report Share Posted April 2, 2004 www.bigshotdyno.com up near cleveland can burn chips and are pretty good with tuning. I wish i knew about them back when i had the supra so i didnt have to go out to toledo. Quote Link to comment Share on other sites More sharing options...
stolen 5.0 Posted April 2, 2004 Report Share Posted April 2, 2004 Hensler Racing here in reynoldsburg can do anything you need done to a stang with except of tuning for the time being. we sub that out to brian or rob Quote Link to comment Share on other sites More sharing options...
slow4now Posted April 2, 2004 Report Share Posted April 2, 2004 We don't discriminate either, we can make anything fast/faster. smile.gif Matter of fact I think we have an 03 Cob........ Quote Link to comment Share on other sites More sharing options...
Amy Posted April 2, 2004 Report Share Posted April 2, 2004 I am having mine tuned at Pauls Automotive Engineering in Cincy.. they are great people ask for Tom... Yaaay April 27th is the day the stang will run again.... Quote Link to comment Share on other sites More sharing options...
rl Posted April 2, 2004 Report Share Posted April 2, 2004 Originally posted by Crocostimpy: Because they work on and tune the new cobra's all the time rather than have someone around here that has no tuning experience. I'd like to think that we have just a little tuning experience. We've done around 50 mailorderchips and dynotunes in just last 2 months, mostly modular stuff (some pretty wild modular stuff at that) without any complaints. We've been in business since September (we're like the 3rd SCT dealer/tuner). We're almost always booked 2 weeks in advance. Be wary of autologic dealers (pauls in cincy). With 4 bank cars they only have access to 2 banks which leads to some interesting tunes (rev limiter issues, fueling issues if you have larger injectors, loading issues leading to incorrect timing, generally bad stuff) I'm good friends with Ken and the other guys who own Modular depot (the place that purchased Apten)They are good...Though I don't think they have got their dyno in yet (they have only had their shop for a few weeks). Rob [ 02. April 2004, 04:49 PM: Message edited by: rl ] Quote Link to comment Share on other sites More sharing options...
rl Posted April 2, 2004 Report Share Posted April 2, 2004 Originally posted by AmysBAD98GT: I am having mine tuned at Pauls Automotive Engineering in Cincy.. they are great people ask for Tom... Yaaay April 27th is the day the stang will run again.... If your pro-m 80mm meter is cal'd for 42# injectors you are going to peg the crap out of it with 18psi... Quote Link to comment Share on other sites More sharing options...
Don 95Vert Posted April 2, 2004 Report Share Posted April 2, 2004 Originally posted by Crocostimpy: Because they work on and tune the new cobra's all the time rather than have someone around here that has no tuning experience. Hope you weren't referring to us, because if you are, you should do your homework before you blather on about something you don't know about. Here's a little tidbit that you may not know, we also work directly for SCT - I do a lot of things, including all of their documentation and tutorials. And we also travel around and provide training to other SCT dealers, teaching them to use the software, and how to tune a car properly. IMHO, that's a pretty stout qualification, plus there are other things I could list. If you weren't referring to us, then sorry - nevermind. BTW: Ken and Gene of MD Motorsports/Apten Performance are terrific, they do know what they are doing, and run an honest shop. They are good friends of ours and we recommend people that are around Cinci go to them. But Columbus also has people that know how to tune Mustangs - and we'll soon have software for GM and Chrysler. Don http://www.lasotaracing.com Quote Link to comment Share on other sites More sharing options...
Guest James C Hensler Posted April 17, 2004 Report Share Posted April 17, 2004 I'm letting Don and Rob tune my race car so does that count for anything? Untill something changes they will tune all of Hensler Racing Customer cars. Quote Link to comment Share on other sites More sharing options...
90gt Posted April 19, 2004 Report Share Posted April 19, 2004 Originally posted by rl: If your pro-m 80mm meter is cal'd for 42# injectors you are going to peg the crap out of it with 18psi... It hsd 50#'s. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.