baron_ Posted May 18, 2006 Report Share Posted May 18, 2006 Looking to upgrade my 10 bolt pontiac posi to a 12 bolt chevy, possibly anyone happen to have one laying around or in an old junker? prefer 1965 or 1966, but could maybe make 67 - 72 work Link to comment Share on other sites More sharing options...
Maro Posted May 24, 2006 Report Share Posted May 24, 2006 You do know that they go for over a grand... right? Link to comment Share on other sites More sharing options...
baron_ Posted May 24, 2006 Author Report Share Posted May 24, 2006 yea - i know they're not cheap trying to find one local to save a few bucks on shipping i've got 3 GTO's, a bonneville and around 10 v8's in the garage the latest GTO convertible is getting a tremec - wanting some steeper gears to replace the 10 bolt Link to comment Share on other sites More sharing options...
desperado Posted May 24, 2006 Report Share Posted May 24, 2006 I have one, but it's narrowed a good bit, has a spool and is stuffed with Strange axle's. I assume that you are talking about the old front loader right? The car it's under is an 80 Monte Carlo and it's tubbed with 31X15X15 I believe to give you some ides of how narrow it is. If you are interested, let me know and I will measure it for you. It's currently setup for ladder bars and coil overs but you could change it to a 4 link with less than the normal amount of hassle. BTW, I also do have a 12 bolt under tha Camaro. Posi with 4.10's. I also have a set of 4.56 gears. I would need enough out of it to convert over to a Ford 9 and mini tub the car though, I have a 9 to be reworked so that cost wouldn't apply, but the rest would. The camaro is an 80 Z-28 but the rear is not the stock bullshit that came in it. Let me know if there is any intrest and I will get you some numbers (width and model numbers off the rear. Link to comment Share on other sites More sharing options...
Recommended Posts