desperado Posted May 23, 2006 Report Share Posted May 23, 2006 I am looking for a set of full roller rockers 7/16, studs for the same. A set of NEW hydraulic lifters, and willing to look at a roller cam (I have lifters) below 630 lift at the valve and under 295 duration. Would prefer something with little overlap and more duration on the exhaust than the intake lobe (nitrous/turbo/blower type). Let me know if you might have anything like that and what it's gonna cost me. This stuff needs to be for a standard block and head, no Jesel or other exotic stuff, just a pre 87 motor standard 441 casting heads. Link to comment Share on other sites More sharing options...
Guest Removed Posted May 23, 2006 Report Share Posted May 23, 2006 I have a soild roller cam in the high .600 lift range....i'll find the cam card if your interested! Link to comment Share on other sites More sharing options...
desperado Posted May 23, 2006 Author Report Share Posted May 23, 2006 Yeah, get me the specifics and a price for it. I am assuming that it's a steel gear (dist drive). I am also considering your PJ gear drive. Did yo uneed to gring the back side of the idler at all when you installed it? Also, do you have the lock plate and the cam button for it? Link to comment Share on other sites More sharing options...
Guest Removed Posted May 23, 2006 Report Share Posted May 23, 2006 I HAVE THE LOCK PLATE.. no button, i pulled it out of a buddies nova, he didnt like all the noise. i'll get the cam specs Link to comment Share on other sites More sharing options...
Recommended Posts