coltboostin Posted June 25, 2006 Report Share Posted June 25, 2006 Due to a lack of finances and some personal issues, I will be getting out of the car scene for a while. Since bills need to get paid, I need to make some money. What better way than to sacrifice the legend itself… The Colt being destroyed way beyond repair-Everything that was salvageable is up for grabs. 10.5@148mph @ 30psi. Full Turn Key motor-2200$ Made 708whp and 508 ft lbs without an issue to the car’s death. Aprox 6500miles on it. Well Ported head-comparable to mainstream “Stage 3” port jobs- new guides/seats Milled and O-ringed Stock springs with “special sause” shims and Titanium retainers-tested to daily 9k shifting 2.0 block Polished crank, newer oil pump cover No balance shafts Eagle Rods-Wiesco pistons-.20 over with full floating wrist pins The car is in no condition to do a compression test, so all I can say is that the car ran great, pulled hard, did not smoke, and only had any sign on blowby with boost above 32psi (which is normal). This set up would cost you $4000+ . I will include factory turbo cams, or you can by the Comp cams I have for only 200$ more! Local pick up preferred, but can deliver short distance. Comp 101200 cams. Perfect condition-Made 708/508@33psi.-$360 shipped SMP Top Mount GT42 FULL Set up.-2200$ Shearerfabrications.com top mount, hands down the best on the market. Twin entry T4, with twin 38mm Gates. Saw full boost @6300rpm GT42 non-BB turbo-Absolutely NO shaft play Full v-band 4inch Down pipe to 3.5 inch exhaust (at firewall)-2 O2 bungs Gates dumped into the exhaust All parts have 6500miles on them Will include oil feed and drain This all retails for over $3500 purchased separately 13.5x3.5x24inch core FMIC-J-spec Tail BOV welded onto the cold side tank with pipes-$600 Set up for GM Mas action-Custom tanks tapered to fit the massive core. Piping is a mix of aluminum and mild steel-2.5 from turbo and 3inch out. 93 FWD Talon trans, with LSD insert. Tested to 9k, no grids, never missed a shift. Never one wheel peel again $400 Package Deal- I will sell EVERYTHING listed- for $5000. That’s a savings of 600$-Plop it in Mom’s Colt and have the biggest e-penis in the land. You can recoup the money racing Hyabusas by the end of summer. I will let the long block and Turbo set up go for 4200$. With cams. A savings of $400 Not obo, not yet. Email me at tercelturbo@hotmail.com with questions Pics http://thelotspot.com/images/jp/Colt06/DSC00154-1.JPG http://thelotspot.com/images/jp/Colt06/DSC00158-1.JPG http://thelotspot.com/images/jp/Colt06/DSC00161-1.JPG http://thelotspot.com/images/jp/Colt06/DSC00162-1.JPG http://thelotspot.com/images/jp/action/before/DSC00186.JPG http://thelotspot.com/images/jp/action/before/DSC00179.JPG How it ran @ 30psi http://videos.streetfire.net/video/e3da15e9-fc26-408c-a714-ad318845ffb1.htm I am just sorry I never got to turn up the wick. Do it for me. Link to comment Share on other sites More sharing options...
Science Abuse Posted June 25, 2006 Report Share Posted June 25, 2006 I thought you were supposed to eat its heart. Link to comment Share on other sites More sharing options...
SpaceGhost Posted June 25, 2006 Report Share Posted June 25, 2006 Linn new motor for the DSM? Link to comment Share on other sites More sharing options...
Jelloman4571647545499 Posted June 25, 2006 Report Share Posted June 25, 2006 free bump for nice setup and car. Link to comment Share on other sites More sharing options...
iwishiwascool Posted June 25, 2006 Report Share Posted June 25, 2006 Is the engine bay the same size as a 1g? As in, is your FMIC setup custom to your tiny car? Link to comment Share on other sites More sharing options...
coltboostin Posted June 25, 2006 Author Report Share Posted June 25, 2006 Is the engine bay the same size as a 1g? As in, is your FMIC setup custom to your tiny car? I sold my old front mount to a kid with a 1g and it bolted right up. A 1g has more romm up fornt than I do, but the pipe lenghts should be dead on with no modification. I think the core would fit up front as well with no problems. Link to comment Share on other sites More sharing options...
coltboostin Posted June 26, 2006 Author Report Share Posted June 26, 2006 Typo- and a few more peices. Both the inlet and outlet of the intercooler are 3inch 91-94 AWD 5 speed ECU-EPROM, socketed, new caps, cleaned board.-240$ shipped Link to comment Share on other sites More sharing options...
nicktcfcsb Posted June 26, 2006 Report Share Posted June 26, 2006 If someone buys evertying do they get it all assembled in the wrecked colt? For help in recreating the set up? Link to comment Share on other sites More sharing options...
coltboostin Posted June 27, 2006 Author Report Share Posted June 27, 2006 No lol. but that would make my life real easy. Link to comment Share on other sites More sharing options...
Guest Ponyfreak Posted June 27, 2006 Report Share Posted June 27, 2006 Who didn't see this comming? Link to comment Share on other sites More sharing options...
coltboostin Posted June 27, 2006 Author Report Share Posted June 27, 2006 Who didn't see this comming? You didnt expect me to just throw it in another shell? Link to comment Share on other sites More sharing options...
NTHER91 Posted June 27, 2006 Report Share Posted June 27, 2006 who wants to buy a beat to piss, on the ragged edge motor? good luck on the sell im sure someone will buy it due to the numbers Link to comment Share on other sites More sharing options...
P_t0wn Posted June 27, 2006 Report Share Posted June 27, 2006 who wants to buy a beat to piss, on the ragged edge motor? good luck on the sell im sure someone will buy it due to the numbers get the fuck out retard... Link to comment Share on other sites More sharing options...
Guest MlnknprkrM Posted June 27, 2006 Report Share Posted June 27, 2006 who wants to buy a beat to piss, on the ragged edge motor? good luck on the sell im sure someone will buy it due to the numbers This motor is a beast. Daily driven 700hp motor that has more miles on it than most "race" motors ever make it to. This thing is a fucking champ, and dropped in the right shell will annihilate 99% of the cars on the road. Blow trannies, disentegrate axles. Buy this motor and own a small piece of what once was the colt. Link to comment Share on other sites More sharing options...
04r1 Posted June 28, 2006 Report Share Posted June 28, 2006 I want the turbo for my R1, PM me Link to comment Share on other sites More sharing options...
Trouble Maker Posted June 28, 2006 Report Share Posted June 28, 2006 91-94 AWD 5 speed ECU-EPROM, socketed, new caps, cleaned board.-240$ shipped What were you using for engine management, just an SAFC or did you have a different chip burned or were you using DSM link or what? Just want to know what kind of programing I might be getting on it. And see if I'll have to change it. Right now stock MT programing would be perfect. I'm still not 100% sure I don't have an EEPROM ecu so let me check on that too. I probably don't as I'm a 92. Link to comment Share on other sites More sharing options...
coltboostin Posted June 28, 2006 Author Report Share Posted June 28, 2006 The ECU that is for sale was my spare. It is socketed and comes with the stock chip. Link to comment Share on other sites More sharing options...
coltboostin Posted June 28, 2006 Author Report Share Posted June 28, 2006 who wants to buy a beat to piss, on the ragged edge motor? good luck on the sell im sure someone will buy it due to the numbers Ragged edge? I made 700whp@32psi and 11.2 AFR's. If thats the ragged edge, I am in the wrong business! Link to comment Share on other sites More sharing options...
boosting28psi Posted June 29, 2006 Report Share Posted June 29, 2006 is this engine still for sale? pm with a price..i didnt get the 5k and the 2200? Link to comment Share on other sites More sharing options...
coltboostin Posted June 29, 2006 Author Report Share Posted June 29, 2006 5k was for everything-but the IC and turbo set up are already gone. 2200 is for the long block WITH cams, and yes, many iqueries, but no money in hand as of yet. Link to comment Share on other sites More sharing options...
boosting28psi Posted July 2, 2006 Report Share Posted July 2, 2006 would you wana trade for a 347 stroker with 0 miles on it? 4340 forged crank....bottom end is already Link to comment Share on other sites More sharing options...
Guest t2fastalon Posted July 2, 2006 Report Share Posted July 2, 2006 would you wana trade for a 347 stroker with 0 miles on it? 4340 forged crank....bottom end is already :funny: :funny: Link to comment Share on other sites More sharing options...
Kevin R. Posted July 5, 2006 Report Share Posted July 5, 2006 :funny: :funny: You have a Colt too! Link to comment Share on other sites More sharing options...
Guest Removed Posted July 5, 2006 Report Share Posted July 5, 2006 would you wana trade for a 347 stroker with 0 miles on it? 4340 forged crank....bottom end is already Link to comment Share on other sites More sharing options...
coltboostin Posted July 5, 2006 Author Report Share Posted July 5, 2006 :funny: :funny: You have a Colt too! :funny: :funny: Which is probably faster than your pile! Link to comment Share on other sites More sharing options...
Recommended Posts