Jump to content

mustang parts


Buckeye1647545503

Recommended Posts

1.Carb intake performer rpm was sandblasted and painted with high temp silver looks new 1 inch phelalic(sp?) spacer and 650 holley carb is running order 175.00 O.B.O.

 

2. Bbk longtubes for stick with offroad h-pipe and flowtubes and flowmaster mufflers. All used but in good shape every little rust. Gone!

 

3. T-5 90k on it , T-5 bellhouseing, Freshly turned flywheel (302) Brand new AZ clutch never even started but installed, 300.00

 

4. 3 Holley blue pumps one is freshly rebuilt and two need done. 75.00 for all three

 

5. Mallory 3 port race reg. with vac referance (make the pump only make a few psi at idle so it does not hum loud and pwmp runs cooler and lasts longer) Brand new never used and has a liquid jegs gauge on it as well I paid 75 for just the reg plus $ for the gauge and fitting. 65.00

 

6. Ford motorsport "cobra" finned valve covers they have a small crack in the back corner but are totally useable as is or pat tinman to do a quick tig on them. 75.00

 

7. Factory Complete dual snorker off a 85/86 Gt complete with plastic vac line and flex pipr to attach to fenders 75.00

 

I am also open to these Itiems

1. Efi boost referance fuel pressure reg (prefer aeromotive)

2. 42lb injectors (set of 8)

3. Bbk shorties

Link to comment
Share on other sites

i didnt see any markings on them when I glanced at them. Where are yours marked? If they aren't BBK and you don't want to trade, how much for the headers alone? They are for a foxbody 5.0l right?
Link to comment
Share on other sites

1.Carb intake performer rpm was sandblasted and painted with high temp silver looks new 1 inch phelalic(sp?) spacer and 650 holley carb is running order 155.00

 

3. T-5 90k on it , T-5 bellhouseing, Freshly turned flywheel (302) Brand new AZ clutch never even started but installed, 275.00

 

4. 3 Holley blue pumps one is freshly rebuilt and two need done. 50.00 for all three

 

5. Mallory 3 port race reg. with vac referance (make the pump only make a few psi at idle so it does not hum loud and pwmp runs cooler and lasts longer) Brand new never used and has a liquid jegs gauge on it as well I paid 75 for just the reg plus $ for the gauge and fitting. 55.00

 

6. Ford motorsport "cobra" finned valve covers they have a small crack in the back corner but are totally useable as is or pat tinman to do a quick tig on them. 75.00

 

7. Factory Complete dual snorker off a 85/86 Gt complete with plastic vac line and flex pipr to attach to fenders 65.00

 

I am also open to these Itiems

1. Efi boost referance fuel pressure reg (prefer aeromotive)

3. Bbk shorties

new prices

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...