Bam Posted November 7, 2006 Report Share Posted November 7, 2006 I've pulled a 351w for my mustang. I want to get it bored/possibly stroke it out and blueprinted/balanced/assembled with forged internals over this winter. I can handle the install and shit, but I want all the machine work and whatnot done professionally. Who do you guys recommend? Also, mustang guys, what do you recommend I have done, what can I bore it out to safely? I'm shooting for 600whp, so I'm building a block for more. Thanks Does anyone sell a stroker kit for a 408? Or what? Quote Link to comment Share on other sites More sharing options...
Guest Removed Posted November 7, 2006 Report Share Posted November 7, 2006 .030 over or have it sonic checked too see how far it can go! old or newer block? main girdle and valley girdle! Quote Link to comment Share on other sites More sharing options...
Bam Posted November 7, 2006 Author Report Share Posted November 7, 2006 I'm not sure what you consider old/new? It's out an 89 van. Quote Link to comment Share on other sites More sharing options...
Guest Removed Posted November 7, 2006 Report Share Posted November 7, 2006 newer... older = 69, 70 block(which are stronger) Quote Link to comment Share on other sites More sharing options...
Guest Hal Posted November 7, 2006 Report Share Posted November 7, 2006 I agree .030 over with girdles. I'm not positive if anyone offers a stroker kit or not. What are you looking at? N/A, turbo, blown, spraying the house down? Quote Link to comment Share on other sites More sharing options...
Guest Removed Posted November 7, 2006 Report Share Posted November 7, 2006 408ci kits ftw Quote Link to comment Share on other sites More sharing options...
88lx5oh Posted November 7, 2006 Report Share Posted November 7, 2006 talk to eric, he did a 408 windsor thats pretty nasty Quote Link to comment Share on other sites More sharing options...
Guest powers Posted November 7, 2006 Report Share Posted November 7, 2006 eagle, chp, and dss sell complete rotatting assemblies if you don't want to piece it together yourself. Take it to Fowler engines on switzer ave for the machine work. Quote Link to comment Share on other sites More sharing options...
SlowmotionMotorsports Posted November 7, 2006 Report Share Posted November 7, 2006 Take it to Fowler engines on switzer ave for the machine work. +1 Joshua SlowMotion Motorsports Quote Link to comment Share on other sites More sharing options...
Guest BLUE BY U Posted November 7, 2006 Report Share Posted November 7, 2006 Mike Phillips FTW Quote Link to comment Share on other sites More sharing options...
Guest Removed Posted November 7, 2006 Report Share Posted November 7, 2006 eagle, chp, and dss sell complete rotatting assemblies if you don't want to piece it together yourself. Take it to Fowler engines on switzer ave for the machine work. i take it after the mishap with johns motor , you guys dont use mike p no more? Quote Link to comment Share on other sites More sharing options...
351mach11647545510 Posted November 8, 2006 Report Share Posted November 8, 2006 Engine Rebuilder Supply off of 3c. Just a suggestion. Took a head in one time and was very satisfied. Also, has anyone ever used Performance Research in westerville for any work? Quote Link to comment Share on other sites More sharing options...
2pointslow Posted November 8, 2006 Report Share Posted November 8, 2006 yes fowler ftw, guy that works there used to do all the work on my dirtbike.. they do great work Quote Link to comment Share on other sites More sharing options...
NTHER91 Posted November 9, 2006 Report Share Posted November 9, 2006 i got hte eagle kit was and am pretty happy with it .30 over and a 4.0 in stroke with a 11 cc dish piston 58cc heads (forms a ball like cumbustion chamber) 6.250 rods and everythig to put it together i took mine to FAST racing and am very very very happy with them i have seen many engines put together by them (all mustangs) and they were great performers thats my opinion though feel free to pick my brain heads are the key and a huge cam 600 is a good goal but dont be caught up with numbers im making less power than alot of thease guys and am either faster or will be due to tuning issues and thats no spray yet Quote Link to comment Share on other sites More sharing options...
DOLLAR BILL Posted November 9, 2006 Report Share Posted November 9, 2006 Engine Rebuilder Supply off of 3c. Just a suggestion. Took a head in one time and was very satisfied. Also, has anyone ever used Performance Research in westerville for any work? it not in westerville it is columbus on westerville rd an innis rd thr are real good.there not cheep but it will be right you get what you pay for. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.