Dave1647545494 Posted May 21, 2007 Report Share Posted May 21, 2007 I have a ton of used/good used/rebuildable big block buick parts that I need to get rid of 72 455 block std bore $50.00 needs over bore 67 430 block std bore $50.00 needs honed 2 cranks fit 400 430 455 $10.00 each good for regrinds both at std std now 67 430 big port heads $100.00 pair complete valves h.d. springs stock rocker 72 455 smog heads $20.00 pair complete valves h.d. springs rockers 16 455 rods 8 with std pistons $10.00 bare set $20.00 piston set(balanced) 8 430 rods with std pistons $20.00 1 new set of back grooved hp cam bearings from ta perf $30.00 fits400430455 1 offy single plane carb intake fits 400 430 455 $75.00 2 pairs of valve covers $10 per set 2 timing covers 400 430 455 with wp and op $100 ea 3 starters $5 ea 2 delcotron style alts (internal regulator) $15ea 1 cs style alt (internal reg) $30 1 hei dist with cap rotor coil (module bypassed for msd box) $50 2 oil pans need bead plast and paint $10 ea proably a bunch of other stuff also if you have a BBB and you need an engine part that you don't see listed post or pm and I'll see if I've got it Link to comment Share on other sites More sharing options...
Stimmel1647545512 Posted May 21, 2007 Report Share Posted May 21, 2007 Do you have a set of factory original Stage 2 heads for me? Link to comment Share on other sites More sharing options...
Dave1647545494 Posted May 21, 2007 Author Report Share Posted May 21, 2007 oh also none of this stuff interchanges with any other gm brand with the exception of the alternators thanks for looking Link to comment Share on other sites More sharing options...
Dave1647545494 Posted May 21, 2007 Author Report Share Posted May 21, 2007 Do you have a set of factory original Stage 2 heads for me? nope but ta makes a good copy in aluminum Link to comment Share on other sites More sharing options...
baron_ Posted May 21, 2007 Report Share Posted May 21, 2007 starters interchange too know anyone with pontiac stuff? i'll ask a few buick guys i know if they're looking for anything Link to comment Share on other sites More sharing options...
Dave1647545494 Posted May 21, 2007 Author Report Share Posted May 21, 2007 not off hand I'd trade the whole pile of stuff for 3550 tremec for a mustang or a good blower with all the brackets and stuff too Link to comment Share on other sites More sharing options...
Dave1647545494 Posted May 26, 2007 Author Report Share Posted May 26, 2007 bump Link to comment Share on other sites More sharing options...
Dave1647545494 Posted June 25, 2007 Author Report Share Posted June 25, 2007 top Link to comment Share on other sites More sharing options...
Nitrousbird Posted June 26, 2007 Report Share Posted June 26, 2007 Do you have an air cleaner? 2bbl or 4bbl. Stock style with thermo sensor. Link to comment Share on other sites More sharing options...
Dave1647545494 Posted June 26, 2007 Author Report Share Posted June 26, 2007 I may have the lower part for a 4bbl I'll have to look and see if the sensor is still in it Link to comment Share on other sites More sharing options...
Guest Wunna Dig Race Posted June 27, 2007 Report Share Posted June 27, 2007 Nice collection of buick parts do you have any 4bbl carbs? Link to comment Share on other sites More sharing options...
Dave1647545494 Posted June 28, 2007 Author Report Share Posted June 28, 2007 I might have 1 or 2 highly modified q-jets left front feed 850+ cfm if I have any left they are set up for a cam that makes like 6" of vacum at idle they have no choke or cut down choke towers idle circut enlarged filter removed air doors adjusted to pop right open extra big accelerator pump and the biggest jets and smallest rods I could get let me know if thats what you need and I'll look for them Link to comment Share on other sites More sharing options...
Guest Wunna Dig Race Posted June 28, 2007 Report Share Posted June 28, 2007 I might have 1 or 2 highly modified q-jets left front feed 850+ cfm if I have any left they are set up for a cam that makes like 6" of vacum at idle they have no choke or cut down choke towers idle circut enlarged filter removed air doors adjusted to pop right open extra big accelerator pump and the biggest jets and smallest rods I could get let me know if thats what you need and I'll look for them Well Im looking for something I can put on a truck with a RV cam for the mud pit Link to comment Share on other sites More sharing options...
Dave1647545494 Posted June 30, 2007 Author Report Share Posted June 30, 2007 your more looking for a standard side feed 650 or 700 then I can look and see, but I don't think I have any chevy carbs left Link to comment Share on other sites More sharing options...
Recommended Posts