Jump to content

1664 hp 4 rotor dyno


ChevyMan1972
 Share

Recommended Posts

The rx-7 has only 2 rotors(cylinders), well this motor has 4 of them. 4 rotors, 4 housings, 12 apex seals. You get the idea.

 

Jackson

 

description = fail

 

think of rotors as modules, you have a rotor and a housing, and then the apex seals that are like a headgasket for a piston motor, they seal the outside rotor edges to the housing...

 

now picture four housings stacked one behind each other, 4 rotors interconnected via outputshaft...

Link to comment
Share on other sites

No, it would be like 4 oranges compared to 12 apples. They're both fruit, and that's about it.

 

Give him more credit than that; the motor does fire 12 times per cycle. It's just missing some critical peices to be compared with a "normal" engine.

Link to comment
Share on other sites

They both have 12 combustion chambers... but the whole geometry is completely different. You can't really compare the two.

 

Ex:

This engine would be a 7.8L 12 cylinder, with a 6.54" bore and a 1.18" stroke that made a complete cycle after 3 crankshaft revolutions.

Link to comment
Share on other sites

The fire is an exhaust leak, from a poor mainfold manufacture or design. At temp the exhaust is either blowing by the gasket from pressure or the manifold is warping/lifting from pressure/heat.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...