FS: Buschur 35r Cast Manifold Kit and more!

[vwjeff]

Ok guys my cast manifold set is FS. It is still on the car and I will remove here with in a few days (proly x-mas day).

 

My car is going to Buschurs at the end of January/ Feburary, for a full build and I need to get this stuff sold.

 

Complete 35r cast manifold kit, with a Buschur polished heat sheild. The CHRA has MAYBE 1k on it. The compressor housing is a Tial/ HTA cover, all that is needed is the HTA wheel, for a full HTA kit. There is ZERO surge with this housing. I will include the feed line, return fittngs. 44mm Tial wastegate, with dump tube. And the 02 housing is already been drilled and welded for a front o2 sensor.

 

Also I have PTE 880 injectors.

 

Buschur MAF Pipe w/ silicone coupler and clamps to turbo

 

Buschur Air Filter

 

Forge 1g Flanged BOV... works great with BR UICP that is flanged for a 1g.

 

255 single Walbro fuel pump aswell.

 

Looking for $3100 for everything. plus shipping.

 

Also included in the price I will include the correct scalling factors needed to make the injectors work with your stock ECM, and latancy voltage #'s as well.

 

If you have a IX, I will send you my own pump (93) map, and or C16 map... which should get you REALLY close for an awsome tune.

 

I WILL NOT PART OUT... DONT ASK{thumbup}

 

This is the highest reflash car ever on Buschurs Dyno.

Buschur Mustang Dyno #'s

93 Pump.. 377 whp 289tq at 22psi

C16.. 467 whp 367tq at 29psi.. 10.91 at 129.

 

Here is a pic of the compressor housing that is on the car now with a few others....

http://i30.photobucket.com/albums/c343/vwjeff/Picture335.jpg

http://i30.photobucket.com/albums/c343/vwjeff/Picture312.jpg

http://i30.photobucket.com/albums/c343/vwjeff/Picture309.jpg

[Evo_Nick]

if this was a few months back i would of jumped all over it.

 

bump for is sweet setup

[GSXRAntwon]

Bump for a great turbo kit....nice #'s Jeff!