Jump to content

free mods for an lsx car


yellowsnake

Recommended Posts

Take the two coolant lines going to each side of your TB and connect them directly together, then put caps on the open fittings on the TB. It cools the air charge into the TB. That's the bypass mod.

 

The bump-stop is on the TB, it's what keeps your linkage actuator from going too far. From the factory, your car normally sees only 90-95% throttle at WOT becasue the stop is too thick. Hook a scanner that measures TPS position in a percentage, and grind away the stop until you hit 100%.

Link to comment
Share on other sites

Take the two coolant lines going to each side of your TB and connect them directly together, then put caps on the open fittings on the TB. It cools the air charge into the TB. That's the bypass mod.

 

The bump-stop is on the TB, it's what keeps your linkage actuator from going too far. From the factory, your car normally sees only 90-95% throttle at WOT becasue the stop is too thick. Hook a scanner that measures TPS position in a percentage, and grind away the stop until you hit 100%.

 

looks like i have some catching up to do

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...