F.S. LS1 cams

[koolrayz]

These cams will not clear stock pistons

 

$275 plus shipping and any paypal

This was a custom cam ground by comp. They are not a regular comp cam lobes, It was spec’d by flowtech induction. It made 535rwhp through an auto and loved the nitrous. This cam was designed around a 408, nitrous and all the boltons. Cam had about 6000 miles and is like new.

Intake Exhaust

Lobe Lift: .380” .381”

Gross Valve Lift 1.70 Ratio: .646” .648”

 

Duration @ .050” Tappet Lift: 246* 254*

 

Lobe Separation: 113*

 

Recommended Intake Centerline: 108*

 

Specs at 108 Degree Intake Centerline:

Valve Timing at Open Close

.050” Tappet Lift: Intake: 15* BTDC 51 ABDC

Exhaust: 65* BBDC 9* ATDC

 

Specs at 110 Degree Intake Centerline:

Valve Timing at Open Close

.050” Tappet Lift: Intake: 13* BTDC 53* ABDC

Exhaust: 63* BBDC 11* ATDC

 

 

$200 plus shipping and any paypal*****SOLD*****

This cam came with my long block from LME not sure who ground it Brian with LME ordered it. I thought it was to mild for my 408 that’s why I bought the cam above. This cam would idle at 700 with the air conditioning running. Cam had about 4000 miles on it and is like new. This would be a hard core cam for a 347 it’s a lot like the vindicator came with more lift.

Lobe Lift: .373” .368”

Gross Valve Lift 1.70 Ratio: .634” . 625”

 

Duration @ .050” Tappet Lift: 240* 244*

 

Lobe Separation: 114*

 

Recommended Intake Centerline: 112*

 

 

http://i212.photobucket.com/albums/cc122/koolrayz/cam-close.jpg

 

http://i212.photobucket.com/albums/cc122/koolrayz/cam.jpg

[Cordell]

I'd be interested in the "milder cam" after I get paid a few times from my new job. I won't make any promises, but if someone else wants it they'd better get it before January. I won't have stock pistons, so I can plan this out. I'll just have to see if you still have it next month.

[koolrayz]

Small cam sold