Jump to content

Putting a fuel system together


Sam1647545489

Recommended Posts

Guest Removed
Fuck I went and got everything I needed the other day to come to find out I only got about 1/3 of what I really needed. Went back today and got all the rest. Now I have a big jegs bag just filled with fittings alone.

 

 

FML

 

i always sit down and map the system and each fitting needed. everyone i have done so far was still wrong due to the jegs guy was being dyslexic and pulled the wrong part numbers off my list :rolleyes:. and of course if was the stuff that wasnt sitting out on the floor and he had to go in the back and pull.:mad:

Link to comment
Share on other sites

i always sit down and map the system and each fitting needed. everyone i have done so far was still wrong due to the jegs guy was being dyslexic and pulled the wrong part numbers off my list :rolleyes:. and of course if was the stuff that wasnt sitting out on the floor and he had to go in the back and pull.:mad:

 

Been to jegs 3x already cause they either forget to put in a part or they give me the wrong ones. Now I gotta lay out 100 fittings on their counter and go through and make sure I got all I need and the correct ones.

Link to comment
Share on other sites

I spent hours in the fitting aisle making sure I had the right fittings when I did my system. Fuck the counter dweebs. They don't have a clue.

 

Sam, make sure your fittings into the FPR do not "bottom out" causing restrictions in flow. I ran the same model in the FD. I know at least one fitting had to be "modified" to get full flow.

 

BTW, that FPR acts as a pulsation dampener as well.

Link to comment
Share on other sites

Guest Removed
Been to jegs 3x already cause they either forget to put in a part or they give me the wrong ones. Now I gotta lay out 100 fittings on their counter and go through and make sure I got all I need and the correct ones.

 

been there man...:(

Link to comment
Share on other sites

I spent hours in the fitting aisle making sure I had the right fittings when I did my system. Fuck the counter dweebs. They don't have a clue.

 

Sam, make sure your fittings into the FPR do not "bottom out" causing restrictions in flow. I ran the same model in the FD. I know at least one fitting had to be "modified" to get full flow.

 

BTW, that FPR acts as a pulsation dampener as well.

 

Noted, thanks

Link to comment
Share on other sites

Guest Removed
maybe you guys should bring a diagram or list and check it twice. nah, that would be to easy.

 

i have thank you...:gtfo:

 

 

i always seem to get the retarded new guy that has only been there 2 weeks every time i go to 11th.

Link to comment
Share on other sites

Guest 614Streets
I hated running around getting fittings for my Nova , clean your lines out real good , wouldnt hurt to run the sytem into a 5 gallon bucket before it see's the motor and then change the filter you just put in back by the pump.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...