Jump to content

F150 2003


s13

Recommended Posts

Guest Removed

1. Insert new key into ignition cylinder and turn it to the ON (RUN) position. The security light on the dash will flash for fifteen minutes.

2. When the security light stops flashing, you have FIVE minutes to start the next step. Turn the ignition cylinder OFF and then back to the ON (RUN) position. The security light on the dash will flash for fifteen more minutes.

3. When the security light stops flashing, you have FIVE minutes to start the next step. Turn the ignition cylinder to OFF and then back ON (RUN) position. The dash will flash for fifteen more minutes.

4. After the security light stops flashing the third time, the new key has been programmed into the vehicles computer and will operate the car. It has replaced ALL the previous electronic key codes and is the ONLY key programmed into the vehicles computer.

 

 

use this ..it that doesnt do it, your having a issue in the system.

Link to comment
Share on other sites

Guest Removed
minor threadjack. rob how do you do that ^^^^^^^^to program multiple keys on the pats system?

dealer has to do it, when you do it with the ford scan tool, your not waiting 15 minutes on 3 cycles. you just do the cycles and follow the on screen commands. you can programm so many or some shit.

 

i know on the kias you could do up to 8. but not all of them had the system. just the amanti and the sedonas, and borregos im sure more of the newer stuff has it now.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...