AJ Posted June 17, 2010 Report Share Posted June 17, 2010 i am looking for drilled circuit board like this http://rsk.imageg.net/graphics/product_images/pRS1C-2265164w345.jpg but it needs to be 15" x 15" so i can cut to size what i want to make out of it. does anyone know where to find something like that in that size? Quote Link to comment Share on other sites More sharing options...
GRN96WS6 Posted June 17, 2010 Report Share Posted June 17, 2010 Doesn't radio shack carry them? If not them then your best bet is online from a place like mouser electronics. Quote Link to comment Share on other sites More sharing options...
Mensan Posted June 17, 2010 Report Share Posted June 17, 2010 You are looking for a breadboard, and yes, Radio Shack is the place to be. Quote Link to comment Share on other sites More sharing options...
Mr. Jones Posted June 17, 2010 Report Share Posted June 17, 2010 You are looking for a breadboard, and yes, Radio Shack is the place to be. Unless something has changed in recent years, he wants a pre-drilled hobby PCB or busboard. Breadboards are only for mocking up stuff typically,and not for duty use. They just have small holes in which you push wires and small components into. *ducks* Quote Link to comment Share on other sites More sharing options...
mmrmnhrm Posted June 17, 2010 Report Share Posted June 17, 2010 You are looking for a breadboard, and yes, Radio Shack is the place to be. You disappoint me, master Jedi. Unless something has changed in recent years, he wants a pre-drilled hobby PCB or busboard. Breadboards are only for mocking up stuff typically,and not for duty use. They just have small holes in which you push wires and small components into. *ducks* Don't worry, you're right. This time. Quote Link to comment Share on other sites More sharing options...
Mr. Jones Posted June 17, 2010 Report Share Posted June 17, 2010 You disappoint me, master Jedi. Don't worry, you're right. This time. HAHA FU ELI!!!!!! *ducks again* Quote Link to comment Share on other sites More sharing options...
Mensan Posted June 18, 2010 Report Share Posted June 18, 2010 You disappoint me, master Jedi. http://thm-a02.yimg.com/nimage/4e3bcccc72665b6c Edit: Also, why the fuck are we letting AJ off the hook here? He asked where to find a product when the fucking picture says RADIO SHACK on it. Make fun of him.... Quote Link to comment Share on other sites More sharing options...
AJ Posted June 18, 2010 Author Report Share Posted June 18, 2010 i have already been to radio shack and they don't have the size i need. i did buy the board thats in my picture to build a test panel with. now i need the full size panel to build the finial product. Quote Link to comment Share on other sites More sharing options...
Mr. Jones Posted June 18, 2010 Report Share Posted June 18, 2010 i have already been to radio shack and they don't have the size i need. i did buy the board thats in my picture to build a test panel with. now i need the full size panel to build the finial product. In all honesty, Radio shack has stopped catering to the electronics hobby enthusiast. I still get my Mouser catalog...and that is what I would recommend. Much cheaper, so you can order a bunch of spares and other accessories as well. I also use digikey occasionally. Between Mouser & Digikey if you can't find what you need, they don't make it. Quote Link to comment Share on other sites More sharing options...
Nate1647545505 Posted June 18, 2010 Report Share Posted June 18, 2010 CAD/OrCad the project and send it out to get cut. Quote Link to comment Share on other sites More sharing options...
Mr. Jones Posted June 18, 2010 Report Share Posted June 18, 2010 CAD/OrCad the project and send it out to get cut. I doubt he's building something of such significance to justify that....just a feeling. Quote Link to comment Share on other sites More sharing options...
AJ Posted June 18, 2010 Author Report Share Posted June 18, 2010 i'm just going to have to buy a bunch of the smaller boards and glue them together to make the size i need. i need the holes to mount everything in a straight line so it looks good when its working. it will never be seen because of the cover thats going over it. yes i know i said needs to look good but never seen, more on this project in the camaro build thread when i get all the parts together Quote Link to comment Share on other sites More sharing options...
Mr. Jones Posted June 18, 2010 Report Share Posted June 18, 2010 i'm just going to have to buy a bunch of the smaller boards and glue them together to make the size i need. i need the holes to mount everything in a straight line so it looks good when its working. it will never be seen because of the cover thats going over it. yes i know i said needs to look good but never seen, more on this project in the camaro build thread when i get all the parts together Let me guess custom "lighting". :ninja: Quote Link to comment Share on other sites More sharing options...
Nate1647545505 Posted June 18, 2010 Report Share Posted June 18, 2010 I'll share my .02 cents regarding electronics and an automotive enviroment: Spend the 25$ on encapsulation/potting epoxy, spray, etc. If its a micro or low voltage setup, look into shielding at the component level -- or at very least an aluminum or plastic conductive enclosure. EMI/RFI is a bitch. Quote Link to comment Share on other sites More sharing options...
dakotart Posted June 18, 2010 Report Share Posted June 18, 2010 Is this what you are looking for? http://www.parts-express.com/pe/showdetl.cfm?Partnumber=320-227 or http://www.parts-express.com/pe/showdetl.cfm?Partnumber=320-226 Quote Link to comment Share on other sites More sharing options...
AJ Posted June 18, 2010 Author Report Share Posted June 18, 2010 I'll share my .02 cents regarding electronics and an automotive enviroment: Spend the 25$ on encapsulation/potting epoxy, spray, etc. If its a micro or low voltage setup, look into shielding at the component level -- or at very least an aluminum or plastic conductive enclosure. EMI/RFI is a bitch. don't need to worry about that, didn't have a problem on the last car i built so i know i won't on this one either. Is this what you are looking for? http://www.parts-express.com/pe/showdetl.cfm?Partnumber=320-227 or http://www.parts-express.com/pe/showdetl.cfm?Partnumber=320-226 too small but yes. already found those. Quote Link to comment Share on other sites More sharing options...
AJ Posted June 18, 2010 Author Report Share Posted June 18, 2010 Let me guess custom "lighting". :ninja: AM radio :bangbang: Quote Link to comment Share on other sites More sharing options...
twistedfocus1647545489 Posted June 18, 2010 Report Share Posted June 18, 2010 AM radio :bangbang: I'm guessing he's building one of these so he can GTFO when 2012 comes knocking. http://techdigest.tv/craigslist_ship.jpg Quote Link to comment Share on other sites More sharing options...
hpfiend Posted June 18, 2010 Report Share Posted June 18, 2010 Electronic Supply Company BR 4672 Indianola Avenue Columbus, OH 43214. Phone: (614) 263-3726 They have all of the stuff radio shack used to have and more... If they don't have it in stock they can get it... OR definitely going to have it but mail order... http://www.digikey.com Quote Link to comment Share on other sites More sharing options...
Mr. Jones Posted June 18, 2010 Report Share Posted June 18, 2010 Electronic Supply Company BR 4672 Indianola Avenue Columbus, OH 43214. Phone: (614) 263-3726 They have all of the stuff radio shack used to have and more... If they don't have it in stock they can get it... OR definitely going to have it but mail order... http://www.digikey.com I already said digikey, GTFO. Quote Link to comment Share on other sites More sharing options...
hpfiend Posted June 18, 2010 Report Share Posted June 18, 2010 COOKIE 4 U! ;-) Quote Link to comment Share on other sites More sharing options...
AJ Posted June 18, 2010 Author Report Share Posted June 18, 2010 digikey didn't have it. Quote Link to comment Share on other sites More sharing options...
mmrmnhrm Posted June 19, 2010 Report Share Posted June 19, 2010 Edit: Also, why the fuck are we letting AJ off the hook here? He asked where to find a product when the fucking picture says RADIO SHACK on it. Make fun of him.... Because sending someone to The Shack (as they're renamed themselves) is like telling them having Britney Spears' sloppy seconds is somehow just as good as Danica McKellar being your date to the senior prom. Between Mouser & Digikey if you can't find what you need, they don't make it. Digikey if you need it fast, Mouser when you need to be picky about specs (dimensions, manufacturers, tolerances, etc) or Digikey doesn't have it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.