TurboRust Posted July 11, 2010 Report Share Posted July 11, 2010 I have a full setup down to wiring, computer, mounts, fmic, and clutch hydraulics to make a 2.3 turbo fit in a 86-91 rx7.. parts include 2.3 turbo from an 88 ford thunderbird wc turbocoupe t-5 trans with new clutch, throwout bearing, and slave ranger roller cam gear with adj cam gear ported rfe6 exhaust manifold t3 60/48 with 3" downpipe ported knife edge lower intake, sheetbox upper intake with 65mm tb welded together as one piece stock 35 lb injectors with an adj fpr merkur harness repinned for the LA3 ECU LA3 Big Vam merkur engine mounts New distributor, cap, rotor, wires, plugs, waterpump, thermostat, setup for a short belt to run an alternator and waterpump, no a/c or ps. everything ready to be turn key $1800 pics will be added soon Link to comment Share on other sites More sharing options...
Recommended Posts