ObliqueFD Posted October 8, 2010 Report Share Posted October 8, 2010 So I have these symptoms: Hard to start. Runs rich. Engine floods easily. Poor gas mileage. Can anyone recommend a place to send my injectors to be cleaned and flow tested? Quote Link to comment Share on other sites More sharing options...
Guest 614Streets Posted October 8, 2010 Report Share Posted October 8, 2010 Check your fuel pressure regulator and also your check valve at the pump. Quote Link to comment Share on other sites More sharing options...
ObliqueFD Posted October 8, 2010 Author Report Share Posted October 8, 2010 Check your fuel pressure regulator and also your check valve at the pump. Thanks for the tip. Now that I think about it, it makes more sense that the FPR could be bad than a fuel injector. Quote Link to comment Share on other sites More sharing options...
EvoXbmx Posted October 8, 2010 Report Share Posted October 8, 2010 http://WWW.WITCHUNTER.COM Seriously.... Quote Link to comment Share on other sites More sharing options...
Smokey Posted October 8, 2010 Report Share Posted October 8, 2010 sounds like a rotary to me...I crack myself up sometimes. I'd check the FPR first as mentioned. For the injectors I don't know of anyone locally. Everyone still seems to use RC Engineering for the clean/balance last I checked. Quote Link to comment Share on other sites More sharing options...
Mojoe Posted October 8, 2010 Report Share Posted October 8, 2010 I had very similar issues last week. Just replaced the FPR and a fuel pump that was going bad. Also put clean sock's on the fuel pumps and looking to replace fuel filters. Still need time to check if I can pull out some fuel from the tune. I'm rich like Warren Buffet on fuel. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.