Just finished cutting in almost everything for the bathroom floor.

[Twistedrx7]

Just have to cut a little off the left side outside border to get it fit (walls runs out an inch). And then cut in the rest of the inlay, then mortar.

 

http://i27.photobucket.com/albums/c168/twistedrx7/Mobile%20Uploads/1121002107_0001-1.jpg

[TimTaylor751647545500]

Looks good. Nice job.

[smokin5s]

Where's the pewper drain and heater register?

[evan9381]

Where's the pewper drain and heater register?

 

thats what i was wondering..

[Twistedrx7]

You poop in a sac and throw it down the tub. Just gotta make sure someone isnt using the tub.

 

I have to put that out yet. The vent is located in the inlay about a foot from the tub. and the pooper hole is right where that ugly tile is with the brown stain. In order to make the cut out easier i can get to the tile from the bottom side and draw it from there then cut it out.

 

Thinking of slicing the tile in two and cutting it from there. Or drilling holes all the way around it so its one tile.

[ObliqueFD]

Thinking of slicing the tile in two and cutting it from there. Or drilling holes all the way around it so its one tile.

 

Nice job. Don't slice the tile in two. It won't look right.

 

If you have an angle grinder you can buy a diamond disc that will cut the tile. Cut it from the back side of the tile to get a cleaner cut on the finished side.

 

I would get a blade like this. http://www.northerntool.com/shop/tools/product_200309237_200309237