Jump to content

F-body parts & 99 Firebird partout.


Transamatt99

Recommended Posts

I have alot of f-body parts in my garage that I am needing to clear out. I also have a 99 firebird v6 car that I bought for parts, and am wanting to finishing stripping it down and sell the shell. I am located in zip 43950 and can ship the smaller items. The big or heavy stuff you might as well just come and get it. The following are just some of the items I have taken pics of there is alot more. If you are in need of something that pertains to said car ask or pm me. Thanks Matt.

 

Set of 4 Corvette ZR1 rims with descent tires. Silver 17x9 rims with 275/40/17 rubber. This is the only pic I have on my computer.- 550

http://i192.photobucket.com/albums/z174/bigcheeks6/Columbus%20Racing/silvercar2.jpg

 

Front passenger cloth seat- SOLD

http://i192.photobucket.com/albums/z174/bigcheeks6/seat.jpg

 

Pair of rear calipers with brackets/duralast gold pads/and bolts- 75

http://i192.photobucket.com/albums/z174/bigcheeks6/rearcalipers.jpg

 

Pair of front calipers (same as rears with all the stuff)- 100

 

coilpacks- 50

http://i192.photobucket.com/albums/z174/bigcheeks6/coilpacks.jpg

 

Miscelaneos pile of interiors parts/rear seats/speakers/door panels etc- make offer

http://i192.photobucket.com/albums/z174/bigcheeks6/junkpile.jpg

 

Rear tailight, has small chip out of top right corner but the light is still sealed- 40

http://i192.photobucket.com/albums/z174/bigcheeks6/taillight.jpg

 

Firebird top console for automatic car with all the goodies- Sold

http://i192.photobucket.com/albums/z174/bigcheeks6/console.jpg

 

Pedals out of trans am M6- 50

http://i192.photobucket.com/albums/z174/bigcheeks6/pedals.jpg

 

Bare 10 bolt axle housing- 50

http://i192.photobucket.com/albums/z174/bigcheeks6/rearend.jpg

 

3.8L v6 auto engine wiring harness- 150

http://i192.photobucket.com/albums/z174/bigcheeks6/harness.jpg

 

Several 50mm cog pullies, 75 tooth lower, 34t & 30t upper, spacer for sbc to put the pulleys in front of the water pump. At least 500 bucks worth of new parts in practically brand new shape- 350

http://i192.photobucket.com/albums/z174/bigcheeks6/cogs.jpg

 

10 bolt rear end 4 channel includes brake lines/swaybar/richmond 3:73 gearset and backing plates. It has the LCA's attached if you want them and the torque arm that is fine they arent worth much and I dont need them laying around. Will need a new posi unit, it has a detroit truetrac and it stripped itself out on the inside somehow.- 275

http://i192.photobucket.com/albums/z174/bigcheeks6/rearend2.jpg

http://i192.photobucket.com/albums/z174/bigcheeks6/rearend1.jpg

 

I have a clamshell assembly for the torque arm mount. It fits an auto trans- 40

http://i192.photobucket.com/albums/z174/bigcheeks6/torquearmmount.jpg

 

White firebird side skirts or ground effects a little rough but better than nothing-SOLD

http://i192.photobucket.com/albums/z174/bigcheeks6/sideskirts.jpg

Edited by Transamatt99
Link to comment
Share on other sites

Back seat Monsoon speakers?

 

Unfortunately the car did not have the monsoon stereo.

 

is the bare 10 bolt housing 3 or 4 channel ? 3 channel would have the sensor hole at top.

 

It is a 4 channel. and it still has the parking brake cables and the 4 channel wiring on it.

Link to comment
Share on other sites

List updated and a few things added. Here are the rest of the items:

 

Pair of rear rotors- 20

http://i192.photobucket.com/albums/z174/bigcheeks6/rotors.jpg

 

Spec flywheel, could use resurfacing or use as-is- 25

http://i192.photobucket.com/albums/z174/bigcheeks6/flywheel.jpg

 

Wiper cowling- 25

http://i192.photobucket.com/albums/z174/bigcheeks6/cowl.jpg

 

V6 airbox with filter-15

http://i192.photobucket.com/albums/z174/bigcheeks6/airbox.jpg

 

The rest of whats left of the parts car/shell/doors/t-tops/interior wiring/ dash/shifter/k-member. Would make a good front end for a damaged car, was totalled in rear.- 250

http://i192.photobucket.com/albums/z174/bigcheeks6/shell2.jpg

http://i192.photobucket.com/albums/z174/bigcheeks6/shell1.jpg

http://i192.photobucket.com/albums/z174/bigcheeks6/shell3.jpg

 

I also have the outer clamshell for the torque arm that fits an auto trans still NIB from scoggin dickey paid ~50 will take- 30

Edited by Transamatt99
Link to comment
Share on other sites

Sure I will sell you a door if thats all you need. Like darkformula said the door should bolt on but the mirror and fender may not line up 100%. I have never tried to put a firebird door on a camaro. But if you want it $25 bucks and you remove it.
Link to comment
Share on other sites

Sure I will sell you a door if thats all you need. Like darkformula said the door should bolt on but the mirror and fender may not line up 100%. I have never tried to put a firebird door on a camaro. But if you want it $25 bucks and you remove it.

 

Like they say, "The devil is in the details". I saw the pic of the Camaro and thought that was what you were parting out. If I had actually read your carefully written post I would have seen otherwise. $25 is a hell of a deal on the door, but based on the fitment and where you are I think I'll pass this time. Thanks anyhow.

Link to comment
Share on other sites

Are you shipping or is this pick up only? Interested in the calipers.

 

Sure those can be shipped I just didnt want to ship the big stuff like seats, doors, rearends, etc. A road trip would be good you may see some other stuff you want.

 

Brian. Road Trip!

 

Go for it im not that far away lol.

 

Like they say, "The devil is in the details". I saw the pic of the Camaro and thought that was what you were parting out. If I had actually read your carefully written post I would have seen otherwise. $25 is a hell of a deal on the door, but based on the fitment and where you are I think I'll pass this time. Thanks anyhow.

 

Yes I was hoping that wouldnt happen but I am posting pics of the firebird tonight! LMK if you need anything else.

Link to comment
Share on other sites

  • 2 weeks later...
do you have the forward chassis harness? everything form the firewall forward less engine harness.

 

No I actually had to use that for my trans am build. But I have one that came out of an 02 z28 still in pretty good shape. Only has one place where the wires were cut and I believe its where the fans connect but it can be spliced.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...