12oclocker Posted March 15, 2009 Report Share Posted March 15, 2009 Well I wanted my WR250X to have integrated turn signals in the rear LED stock taillight, and didn't want to pay $100 for the after market R1 taillight (WR250X and the '02 '03 R1 use the same taillight) so I cut open the stock taillight with a dremel and a fine cutting disk, and designed my own controller board, cut 4 traces on the board, and placed my controller board inside, then reseal the taillight with krazy glue, here are some pics, schematic, etc, my total project cost was less than $5...Controller Board AssembledFinal ProductI'll post up some more pics after I mount it up, I removed the huge tail section junk, and will be making a custom mount for this under the tail. Quote Link to comment Share on other sites More sharing options...
NinjaNick Posted March 15, 2009 Report Share Posted March 15, 2009 Nice job. Quote Link to comment Share on other sites More sharing options...
12oclocker Posted March 15, 2009 Author Report Share Posted March 15, 2009 Here's my mods so far, custom brackets and stuff....custom taillight bracket...custom license plate bracket... Quote Link to comment Share on other sites More sharing options...
Relboc Posted March 16, 2009 Report Share Posted March 16, 2009 Nice clean light mod. And the anchor of the ass end gone! Quote Link to comment Share on other sites More sharing options...
12oclocker Posted March 17, 2009 Author Report Share Posted March 17, 2009 Nice clean light mod. And the anchor of the ass end gone!lol, thanks, here's a vid of it working http://www.youtube.com/watch?v=KxAZaUC2Wac Quote Link to comment Share on other sites More sharing options...
NinjaNick Posted March 17, 2009 Report Share Posted March 17, 2009 Oh that voice, it's sooooooooooo soothing. Quote Link to comment Share on other sites More sharing options...
12oclocker Posted March 17, 2009 Author Report Share Posted March 17, 2009 hey you making fun of me, lol! Quote Link to comment Share on other sites More sharing options...
kawi kid Posted March 17, 2009 Report Share Posted March 17, 2009 another sweet job done! Quote Link to comment Share on other sites More sharing options...
warmerapfelkuch Posted June 9, 2009 Report Share Posted June 9, 2009 I'm just having alittle trouble understanding how you have the wires soldered to the new board. Can you explain this? Also how did you mount the board once inside the light? Thank you in advance and great mod, well done. Quote Link to comment Share on other sites More sharing options...
FocusDave01 Posted June 9, 2009 Report Share Posted June 9, 2009 thats bad ass! Quote Link to comment Share on other sites More sharing options...
12oclocker Posted June 9, 2009 Author Report Share Posted June 9, 2009 I'm just having alittle trouble understanding how you have the wires soldered to the new board. Can you explain this? Also how did you mount the board once inside the light? Thank you in advance and great mod, well done.I can't explain it now, its already assembled and on my bike, and I don't want to tear it apart.wait till you see my CRF integrated tail light, its going to do chaser patterns for the turn signals, it's going to be sweet! Quote Link to comment Share on other sites More sharing options...
4DAIVI PAI2K5 Posted June 9, 2009 Report Share Posted June 9, 2009 I can't explain it now, its already assembled and on my bike, and I don't want to tear it apart.wait till you see my CRF integrated tail light, its going to do chaser patterns for the turn signals, it's going to be sweet!awesome job yet again buddy, might have to send u a tail light for the sumo and let u wokr some magic Quote Link to comment Share on other sites More sharing options...
Likwid Posted June 13, 2009 Report Share Posted June 13, 2009 nice X over the license plate Good mods! Quote Link to comment Share on other sites More sharing options...
alex985 Posted November 18, 2010 Report Share Posted November 18, 2010 i hope this does not annoy anybody,how do you 12oclocker (here is 16:20 now) are doing? how do you plugged that controller into the led lantern? does that controller fitted inside the plastic, next to the led system? is just that i bought on ebay that lantern, but i want to leave it just the way you done itthanx! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.