Jump to content

looking for some one to help me with my carb


jmc3271647545506

Recommended Posts

I have a 85 z28 with a 350 has flowtech headers. And edelbrock performer. Intake and a crower 268 duration 450 lift @0 degrees of timing just a little cam but I put this street avenger 670 holly on there and its seems likes it is to rich haven't put a light on the timing but did advance it till hard cranking and then backed it off alitttle. Not sure but my buddy messed with it a little and now it seems like the choke is always on loads up at idle if u know anyone who knows these carbs let me know looking to get this done asap thank john
Link to comment
Share on other sites

have u put a timing light on it and checked your initial timing and total timing? timing is everything no carb will work right till thats perfect

if its a electric choke u can adjust it by turning the housing loosen the 3 screws and turn it so it stays open.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...