RedLudeSH Posted September 27, 2011 Report Share Posted September 27, 2011 (edited) Okay, I have an aftermarket steering wheel in my car. From the factory these 2 plugs are connected by a "cable reel" that is eliminated when you switch to an aftermarket steering wheel. I'm just trying to figure out, based on the diagram, which wires i need to connect to each other for it work. Example: (3)from button to (2) from harness (1)from button to (3) from harness etc. I did it on my old Prelude but it was like 5 years ago and i dont remember at all what i connected to what, just know it worked. Thank You for any assistance. http://i64.photobucket.com/albums/h182/redludesh2/wiring.jpg Edited September 27, 2011 by RedLudeSH Quote Link to comment Share on other sites More sharing options...
Rotarded1647545491 Posted September 27, 2011 Report Share Posted September 27, 2011 As it looks in the tables, here's what I'm thinking. #1 from the switch(button) is common(both functions) "on", #3 from the harness is common(both functions) "on", therefore I would connect them. #2 from the switch(button) is resume "on", #1 from the harness is resume "on" so connect those. #3 from the switch(button) is set "on", #2 from the harness is set "on"....connect. at least thats the logical thing I would do. Quote Link to comment Share on other sites More sharing options...
RedLudeSH Posted September 27, 2011 Author Report Share Posted September 27, 2011 Thank You!!!! I have cruise control again :-) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.