thorne Posted January 13, 2012 Report Share Posted January 13, 2012 (edited) 1997 Subaru Impreza L (swapped) Suspension/brakes 03 WRX Brakes ABS Delete 03 WRX Suspension Swap Tockico D Specs with STi springs Lots of bushings (I lost my list) WRX Steering Rack Engine ej257(STi Short Block) with ~3k miles on it all on low boost Rebuilt EJ205 heads ARP Head Studs FP18g turbo Cleaned up heads and exhaust (Removed poor casting / smoothing) TGV Deletes with custom ats mod FIC 900cc injectors Walbaro 255lph IPS Turbo Inlet short ram KN intake NO MAF speed density setup LArge TMIC Turbo XS Hybrid BOV Grimmspeed Uppipe Grimmspeed or Halman MBC (Included but not installed) Borla XR-1 Mufler STi Style exhaust tip 03 ECU Running GRPN Speed Density, I'm willing to convert the car to car berry and make it have a 93 and e85 map with a toggle for an extra 150$. Currently tuned for E85 Transmission 1997 Impreza L gearbox converted to RWD All fab work for custom gearbox done by Performance Theory Motorsports The gears where inspected by both Nate @ PTM and Doug @ IPS and they looked good. The Front diff has been removed and the center diff has be welded by nate @ ptm The rear diff is the diff we used with my STi-RA setup . Flywheel New stock Clutch New custom cable clutch from southbend good to 385tq Wheels 16" StockWRX rims are beat up running goodyear triple treads 75% worn 17" Powdercoated 8 spoke rim. I can't find a picture of them but i had them on my bugeye when it was truckbedlined WRX Seats Radio I just put new speakers in all the doors and it has a sony headunit with a usb slot for a thumb drive to play mp3s Extra Stuff STi-RA gearset and box Front Diff wrx center diff 2nd gear missing 2 teeth. Rallispec sales the replacement parts to reuibld it ~600$ + Labor Stock Modified flywheel by southbend Stage 4 OFE Clutch by Southbend. (Slight score but it matches the flywheel) Custom Wiring Harness We have more hours then i wish to count making this harness work . But that work and labeling may pay off in the end because we have the bare minum you need to make the car run properly and the rest stripped out. Price:7000obo ? I can't have 2 project cars and I really would like to get a g35. This is a project car and there are things about it that are not perfect like the gas gauge don't work (Fixable) and the tempgauge reads wrong because the ej22e had 2 temp sensors. Missing passenger seat belt atm . The body itself is beat up but could be fixed up if someone wanted . The hood scope looks stupid but I didn't have a choice at the time. But it does drive and I drive it work and shes quick on low boost. Here are the second set of rims http://www.40roll.com/lol/Rims.jpg http://www.40roll.com/lol/BattleWagon.jpg The car^ I'll try and get more pics Edited January 18, 2012 by Thorne price Link to comment Share on other sites More sharing options...
Erica Posted January 14, 2012 Report Share Posted January 14, 2012 DAMN, that's neat. Minus the RWD part. GLWS Bill! -Crossle Link to comment Share on other sites More sharing options...
MattKatz Posted January 14, 2012 Report Share Posted January 14, 2012 Yeah...why no AWD? Link to comment Share on other sites More sharing options...
STEVE-O Posted January 14, 2012 Report Share Posted January 14, 2012 Yeah...why no AWD? Probably can't keep awd with that motor and the rest of the drivetrain Link to comment Share on other sites More sharing options...
Nicksredline Posted January 15, 2012 Report Share Posted January 15, 2012 Or. Removed for the weight savings and drivetrain loss... drag wagon...what kind of power does this make? Link to comment Share on other sites More sharing options...
thorne Posted January 15, 2012 Author Report Share Posted January 15, 2012 its not AWD because the Front diff broke in the trans. I have 2 trans for this car. It will easly support AWD and with the current parts 375-400whp is just a turn of the boost knob away.. I don't know what it currently makes as I've not dynoed it with the 2.5 but the exact same setup with a EJ22e bottom end made 365+awhp. http://www.40roll.com/ats/ej2218g.jpg Link to comment Share on other sites More sharing options...
thorne Posted January 18, 2012 Author Report Share Posted January 18, 2012 lowered price. Link to comment Share on other sites More sharing options...
Recommended Posts