Jump to content

SOLD


koolrayz

Recommended Posts

I have two moser 9" rearends for sale. I will post up pictures later.

First one is the rearend out of the trans am. I took it apart and had a machine shop magnaflux the axles and checked them for straightness, The differential / gears looked fine.

Freshly painted black

Lower control arm relocation brackets

Stock width

35 spline axles W/ new bearings, axles have two bolt paterns. One for 1/2" studs, rearend comes with 5/8"" studs.

Currie nodular iron third member

Moser spool

3.50 gear

Wolfe anti roll bar, you will need to buy new tabs to weld into your car. FWOL101 ($359)

Stock backing plates

Stock brake calipers that are ground down to fit weld wheels and brake lines.

This will be a complete bolt unit. $1700 you pickup price

 

Second is the rearend out of the new Camaro******SOLD******

Narrowed 3" per side

35 spline axles, I will have to take the bearings off to remove the brakes as I am keeping them. You will need to provide your own backing plates, bearings etc. I can assemble it with your parts for an additional fee.

Comes with 5/8" wheel studs

Strange nodular iron third member with spool, daytona pinion cover and strange chrome moly 1350 yoke.

Lower control arm relocation brackets

WHeelie bar brackets, Bars can be included for an extra charge

3.25 gear

$1700 you pickup price

 

These can be bundled as complete suspension packages, Later I will be posting the rest of the suspension from the camaro, everything from the K mamber to the panhard bar. The camaro is getting a completely new suspension package from front to rear.

http://i212.photobucket.com/albums/cc122/koolrayz/DSC05805.jpg

http://i212.photobucket.com/albums/cc122/koolrayz/DSC05804.jpg

http://i212.photobucket.com/albums/cc122/koolrayz/DSC05803.jpg

http://i212.photobucket.com/albums/cc122/koolrayz/DSC05802.jpg

http://i212.photobucket.com/albums/cc122/koolrayz/DSC05801.jpg

Edited by koolrayz
Link to comment
Share on other sites

  • 2 weeks later...
What one sold?

 

I marked the narrowed one as sold in the original post. I have not listed the stock width one on LS1tech yet because I really would like a local sale. I will be posting it soon so if you want it you better hurry, its a great value with the $369 anti roll bar and the LCA relocation brackets. Oh you really would like blue99's weld wheels

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...