04 sentra se-r P0340 any nissan techs out there?

[TurboRust]

Buddy's car throws a p0340 cam sensor code and stalls when hot and wont restart. has new crank and cam sensors, exciter wheel on intake cam is in prefect shape, it was reflashed by ricart in 2009 to bulletin ref#ntb06-051a. He's got a baby coming next month and i'm trying to give him a hand. nissans got 400 tsbs on this issue, any help?

[Crossle]

Where did the cam sensor come from? Don't rule out a part just because it is new.

 

When it stalls hot, crank it over and see if the tach is moving. You are checking to see if you have a tach reference. If the tach is not moving you probably still have a bad cam sensor, OR whichever sensor tells the tach where to point.

 

Your symptoms/codes still point at a tach reference issue. New parts or not.

[Rocky31186]

I too would start by putting in a nissan crank and cam sensor....

[Guest CARkid]

If I remember correctly, I had to replace my camshaft sensor. Apparently the stock ones were pretty crappy and made of plastic. The replacements were metal.

 

I had an 02 spec v though...

[EvoXbmx]

If I remember correctly, I had to replace my camshaft sensor. Apparently the stock ones were pretty crappy and made of plastic. The replacements were metal.

 

I had an 02 spec v though...

 

 

+1..........

[TurboRust]

car is now at the dealer getting flashed to the latest update and should be all better.