Benner Posted May 10, 2012 Report Share Posted May 10, 2012 Gotta go remove a radiator support, headlight assembly, bumper and bumper cover for my brother-in-law this weekend at a junk yard. just hoping to see if anyone may know what sizes of wrenches and sockets I need and if anything special is needed for anything. Quote Link to comment Share on other sites More sharing options...
Rocky31186 Posted May 11, 2012 Report Share Posted May 11, 2012 Hammer Quote Link to comment Share on other sites More sharing options...
SRTurbo04 Posted May 11, 2012 Report Share Posted May 11, 2012 Gotta go remove a radiator support, headlight assembly, bumper and bumper cover for my brother-in-law this weekend at a junk yard. just hoping to see if anyone may know what sizes of wrenches and sockets I need and if anything special is needed for anything. Hammer no needs a flat head.. go to autozone grab one of the books for that truck(most of them are open) read threw itll tell you what you need Quote Link to comment Share on other sites More sharing options...
brent1976 Posted May 11, 2012 Report Share Posted May 11, 2012 8mm 10mm 12mm and 13mm. Quote Link to comment Share on other sites More sharing options...
Rocky31186 Posted May 11, 2012 Report Share Posted May 11, 2012 8mm 10mm 12mm and 13mm. Small hammer, regular hammer, large hammer, BFH. 1 Quote Link to comment Share on other sites More sharing options...
brent1976 Posted May 11, 2012 Report Share Posted May 11, 2012 Or just a battery powered sawzaw and a bunch of batteries. That's what my buddy and I used to get a ta door jams and quarter off last year. Quote Link to comment Share on other sites More sharing options...
Benner Posted May 11, 2012 Author Report Share Posted May 11, 2012 Need to keep the radiator support if possible. Quote Link to comment Share on other sites More sharing options...
ross Posted May 11, 2012 Report Share Posted May 11, 2012 Bumper and bumper supports are either 15mm or 17mm. Fender and core support bolts are mostly 13mm and 17mm I believe. As long as you have a metric socket set from 7mm to 19mm, screwdrivers, and a torx set you can take apart anything on an s10 or blazer. Quote Link to comment Share on other sites More sharing options...
Benner Posted May 11, 2012 Author Report Share Posted May 11, 2012 Awesome. Thanks for te info guys. Normally my brother-in-law would do it himself but he's got a new baby to take care of and is two hours away from this place Quote Link to comment Share on other sites More sharing options...
TA In Progress Posted May 11, 2012 Report Share Posted May 11, 2012 (edited) Just did one these a few months back. 18mm nuts on the core support bolts. You'll either need a deep well socket or a wrench for these, as the bolts thread through the nuts a good bit. 10, 13, and 15mm will cover everything else. Take some extensions as well. Edited May 11, 2012 by TA In Progress Added info Quote Link to comment Share on other sites More sharing options...
Browning Posted May 12, 2012 Report Share Posted May 12, 2012 Guessing the vehicle was wrecked or something? If so, tree, hammer, chain and come along Quote Link to comment Share on other sites More sharing options...
Benner Posted May 12, 2012 Author Report Share Posted May 12, 2012 No just looking for front end components for his blazer. Quote Link to comment Share on other sites More sharing options...
Green Bastard Posted May 12, 2012 Report Share Posted May 12, 2012 Or just a battery powered sawzaw and a bunch of batteries. That's what my buddy and I used to get a ta door jams and quarter off last year. i came to say this, not trolling, but if you just cut behind the core support (fenders and everything) it would be easier to take it apart at home where you would have any tool you need and you could take your time. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.