imstock2 Posted February 8, 2013 Report Share Posted February 8, 2013 (edited) I'm still trying to work out a fair price on each item.. If I'm asking to high please provided me with a link to the part you found cheaper and I will match/beat his price. Ls2 timing cover and rear cover 90$ Ls2 corvette valley cover 80$ Ls2 cam retainer plate 20$ Ls2 lifters -sold Ls2 cam 228/232 .595 lift sold 26ft -8am ss fuel line 140$ every sensor on a ls2 block 80$ Power bond und pulley 200$ Meling oil pump sold Stock ls2 oil pump 50$ Arp 12pt studs 200$ 07 tbss oil pan 150$ Spin monster Ported ls3 intake manifold 300$ Stock Ls2 crank, will need polished 150$ Diamond 4.005 bore -10cc pistons -450$ (has only a few dyno pulls) Prc platinum .675 lift dual springs with titanium retainers 260$ 1 good ls3 head milled 15 thou 150$ (includes valves) Either 58 or 24 double roller to Timing set 60$ each Ls2 tbss stock injectors 50$ Ls3 stock injectors sold Ls9 fIC 76 lbs @ 58psi resized 240$ 06 monetary red front bumper,front fenders,rear quarter panels -800$ I have stock front rims,rear rims and another set of rims with dr's for sale as well. Will get price soon Borla axle back 600$ (1,600$ unit) Obx 1 7/8 lt headers include 3in high flow resonator and x pipe 550$ Monster stage 3 clutch 450$ less then 2k miles (900$ new) Ls2 fuel rail oem sold Ls3 rocker arms and pedastals 240$ Rx n/a catch can -80$ Ls3 valve covers-120$ Damaged ls3 head... 20$ (not sure if can be repaired) Ls 6 bolt mains 140$ Stock covette map sensor 15$ 2.5 bar maP sensor good up to 22psi -50$ Nib Manual boost controller 20$ Used manual bc 10$ 7.4 harden pushrods 4205 -90$ Ls3 's valves for one head 150$ I have pictures of everything just ask. Don't want to load up 30 pictures Edited February 14, 2013 by imstock2 Link to comment Share on other sites More sharing options...
imstock2 Posted February 9, 2013 Author Report Share Posted February 9, 2013 I would like 500$ front set (70% life) and 550$ rear with tires (60% life) oem rims but 350$ for the replicas w tire.. Have it all for 1,300$... It cost me 600$ to have all 6 rims powder coated black. Rear tires alone was 280$ a Peice not to include new tpms each. Can't remember how much the front cost.. Can and will seperate Link to comment Share on other sites More sharing options...
SHIEF Posted February 9, 2013 Report Share Posted February 9, 2013 Not thread shitting. Interested but not asking price. Why does the crank need polished? Being machine work wise it does nothing. Like it spun a rod bearing and needs turned down -10? Link to comment Share on other sites More sharing options...
imstock2 Posted February 9, 2013 Author Report Share Posted February 9, 2013 Not thread shitting. Interested but not asking price. Why does the crank need polished? Being machine work wise it does nothing. Like it spun a rod bearing and needs turned down -10? No rod spun or anything, not a single black spot but it just needs clean really, it has some Knicks in the counter weight part of it from where a broken piston made its way between the Windage tray and the counter weight. Link to comment Share on other sites More sharing options...
SHIEF Posted February 9, 2013 Report Share Posted February 9, 2013 (edited) No offense (based on your other thread of rape). But to me diamond pistons are meh, forged or not. -10 bumps the cr up slightly. Id still get in line hone balanced b4 I put it on here 4 sale. Like $150 tops. Being.that changes a lot for someone like me just replacing a lt1 for stock 300ish hp and having to bore it 60 over being whole new rotat ssembly and 600~800 doll hairs later based on ur word which isn't that good here it seems. My eagle internally balanced rotate assem was off 10 one thousand's at crank/rods (sp metallica) and that's brand new. So were piston rods. (2 tight). Just 'some more you know stuff' that people who have put engines 2gether wanna know Edited February 9, 2013 by SHIEF btw drunk Link to comment Share on other sites More sharing options...
SHIEF Posted February 9, 2013 Report Share Posted February 9, 2013 So price on short block minus pistons? Meaning crank if not fucked, and rods if not scored up. Assuming no bore needed over .30 Link to comment Share on other sites More sharing options...
MattKatz Posted February 9, 2013 Report Share Posted February 9, 2013 Are these new or used pistons.....With or without rings? Link to comment Share on other sites More sharing options...
wagner Posted February 9, 2013 Report Share Posted February 9, 2013 Read this before you post in this thread, if it falls out side the rules DONT FUCKING POST IT http://www.columbusracing.com/forums/showthread.php?t=11164 Link to comment Share on other sites More sharing options...
JuicedH22 Posted February 9, 2013 Report Share Posted February 9, 2013 Read this before you post in this thread, if it falls out side the rules DONT FUCKING POST IT http://www.columbusracing.com/forums/showthread.php?t=11164 Thank god you reminded everyone of that. Are you still considering swapping out your trans/rear-end for a TR6060 set up? If so, what do you want for yours and can you provide details on it (Gear ratio, rear gear)? Link to comment Share on other sites More sharing options...
imstock2 Posted February 9, 2013 Author Report Share Posted February 9, 2013 Ls2 block and diamonds pistons sold Link to comment Share on other sites More sharing options...
imstock2 Posted February 9, 2013 Author Report Share Posted February 9, 2013 Thank god you reminded everyone of that. Are you still considering swapping out your trans/rear-end for a TR6060 set up? If so, what do you want for yours and can you provide details on it (Gear ratio, rear gear)? I figured it be cheaper to have rpm do a custom gear ratio for me Link to comment Share on other sites More sharing options...
imstock2 Posted February 12, 2013 Author Report Share Posted February 12, 2013 Tt Link to comment Share on other sites More sharing options...
imstock2 Posted February 14, 2013 Author Report Share Posted February 14, 2013 Parts are selling quick! My lost your gain! Link to comment Share on other sites More sharing options...
DKilbourne Posted February 14, 2013 Report Share Posted February 14, 2013 Do you have any lines/fittings with the catch can? I'd like some pics of it. Thanks. Link to comment Share on other sites More sharing options...
imstock2 Posted February 14, 2013 Author Report Share Posted February 14, 2013 Do you have any lines/fittings with the catch can? I'd like some pics of it. Thanks. The rx catch cans are nice catch can's. Little on the expensive side. Only reason I'm selling is because I need a boosted application catch can. http://i912.photobucket.com/albums/ac326/riapooh18/FAB7B601-C3F6-439D-A500-BD0B89A263A1-603-000000803B63F825_zps154704f0.jpg http://i912.photobucket.com/albums/ac326/riapooh18/7B3281E4-2C18-4637-8196-2BB682BFB29E-603-00000080457DC9B7_zps1536505c.jpg Link to comment Share on other sites More sharing options...
DKilbourne Posted February 14, 2013 Report Share Posted February 14, 2013 Why won't this work for a boosted application? Link to comment Share on other sites More sharing options...
imstock2 Posted February 14, 2013 Author Report Share Posted February 14, 2013 Why won't this work for a boosted application? Boosted applications need 3 ports Link to comment Share on other sites More sharing options...
Recommended Posts