BigOxley Posted March 23, 2014 Report Share Posted March 23, 2014 Buddy at work had the plastic part separate from the rest of it. He is unable get it out now. Any ideas on removal? Quote Link to comment Share on other sites More sharing options...
Rocky31186 Posted March 23, 2014 Report Share Posted March 23, 2014 The plastic ring broke off of the dip stick? Is the top of the dipstick still stuck in the hole? Sometimes you can heat a small wood screw and thread it into the remaining plastic, or needle nose pliers.. Some people just have to replace the entire assembly. Quote Link to comment Share on other sites More sharing options...
BigOxley Posted March 23, 2014 Author Report Share Posted March 23, 2014 The plastic ring broke off of the dip stick? Is the top of the dipstick still stuck in the hole? Sometimes you can heat a small wood screw and thread it into the remaining plastic, or needle nose pliers.. Some people just have to replace the entire assembly. I'll have to check to make sure, but he said the plastic piece removed completely from the metal section. Quote Link to comment Share on other sites More sharing options...
STEVE-O Posted March 23, 2014 Report Share Posted March 23, 2014 Heat up the tube then stick a screw into it. Let it cool down. Put a little pb blaster on it then twist the screw while pulling it up. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.