Jump to content

S10 Caltracs Tuning


StackedDimes

Recommended Posts

What's your truck doing you can put some preload in bars if the car is leaving left or right. You can use the top or bottom hole depending how hard you want to hit the tires. Pinion angle if needed to be adjusted needs to be done with shims if you are far out.

 

 

What's your pinion angle now... What tire and what shock

 

Can be tricky but work

Link to comment
Share on other sites

They are the drag profile ones. Im footbraking at 1.74 60'. It was doing a 1.72 on stock suspension with drag radials trough the stock 10 bolt. This year it got a 9" and the caltracs. Running the radials at about 13psi. Et street radials. Pinion angle is -2*. Has some preload on the bars. Just don't know if this is going to be the best or there is room for inprovement in the suspension tuning.
Link to comment
Share on other sites

Yeah it has 2" blocks in the rear. Last year I was running them on 15psi and had a dead hook every single time. I tried 20 and 18 psi and still blew them off with like a 2.18 60. Friday at trails it'll get more preload and tire pressures adjusted again.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...