Trouble Maker Posted December 28, 2014 Report Share Posted December 28, 2014 All skis are mounted for a 324mm boot. They are all ready to ski, but could use a fresh coat of wax. I'm going to get new skis & boots this year, so this all must go! I have a worn out pair of boots that are free to anyone who buys a set of these skis and can use them; Lange CRL90s in about a 10.5. Dynastar Trouble Makers in 175cm length with Look Pivot Jib bindings $150 OBO Great all around and fun ski. You can take these to the park, through the woods or on the groomers. These are what I take with me whenever I travel. https://plus.google.com/photos/115959979133200355671/albums/6098022244894871329 Dynastar Renegade 4x4 178cm in length with Look XR8.0 bindings $75 OBO Great starter-intermediate ski. https://plus.google.com/photos/115959979133200355671/albums/6098022106662495377 Dynastar Omecarve 10s 158cm in length w/Look Pivot 10 Demo bindings $200 OBO Demo bindings means you can set these to your boot length without needing to go into a shop and get the binding remounted. These things are like the best handling car you've ever driven in or ridden, but for the snow. A complete blast on groomed slopes. https://lh3.googleusercontent.com/-ctGxJYE3POs/VKCG3ECWQvI/AAAAAAAAAfs/rRH2IYZL4IU/w958-h221-no/P1013939.JPG Lange WC 120 ski boots in 10.5s $200OBO A good match to the skis above, higher performance boot. I got these and before I got them fit I decided to go a different direction with my setup. These have only ever been worn to try them on when purchasing them. They never been fited, formed or skied on. https://plus.google.com/photos/115959979133200355671/albums/6098021726033334209 Burton Twin 44 board w/bindings, Burton work boots and an extra set of bindings. $50 OBO One of the ratchets on the current bindings doesn't work 100% correctly, but does latch fine. So they work, just a little bit of a pain to ratchet the strap down. That's why I got the new set of bindings. Not 100% sure they will work with this board since the board is Burtons old 3D (3 screw pattern) setup and new bindings are the square 4 bolt pattern setup. They are 'free' with the board setup for whoever wants this. https://plus.google.com/photos/115959979133200355671/albums/6098022555860413361 Link to comment Share on other sites More sharing options...
Recommended Posts