Suzuki GS1100 GS1150 Street Race Parts OEM NOS Parts (Middletown Ohio 45042)

[Craigslist]

*******NEW AND USED RAJAY TURBO'S AND PARTS********

brand new rajay f flow seven second turbo cartridges(301 HOUSING)two of these are available for a limited time***rajay turbo's and hard parts are out of production*** $700.00 each shipped to lower 48 states USA

Suzuki GS750/1000/1100/1150 16 Valve---->Mr. turbo intake manifold/header/wrap pipe w/ BHP waste gate flange added/banana pipe kit that needs assembled... the header has a cracked primary at the collector which is somewhat common and needs welded. $500.00 firm plus shipping or picked up in person.

"puppet" rear axel blocks w/ axel/brand new/funny bike-top fuel quality/best you can buy...$300.00 firm.

i have over 100 suzuki GS engine covers/stator/clutch/oil pan/sprocket/starter cover/valve cover/ignition cover and so on..

prices start at $10.00 and up depending on condition and description.

suzuki gs1100/1150 mr. turbo pipes and manifold...(CALL FOR MORE INFO!!!)

super lite weight front wheel- either a woody or a kosman(NOT A FACTORY WHEEL)-1.60x18 alm akront/stainless spokes/17mm bearings/single disk((lightest made))) 9 out of 10 condition and straight as an arrow/can be made to fit any bike.$150.00 firm.

complete 18mm 1260 12-1 piston kit/black 83 cylinder w/ big liners installed/this kit was working great when removed several years ago/went to turbo kit (lower compression)/slight damage at the bottem of the number one cylinder from starter clutch bolt becoming loose. this is half or less of what it would cost to have this kit done in your cylinders. $500.00.

1198 20mm 1150 pistons/cut down to 11-1 compression/very nice condition/complete w/ pins and buttons/needs rings. $200.00.

most parts are engine stock and race.

assorted GS1100/GS1150 3.50x17/one GSXR 4.5x18 wheels.

GS850-GS1100 shaft drive 3rd member assy $100.00.

large amount of factory GS& some hayabusa/GSXR rotors.

pre-1980 gs1000 gs850 gs750 gasket sets(bottem end)not many left-$30.00 each

gs 550-650-750-850 8 valve THICK OEM style valve cover gaskets(need to bring V.C. so i can match it up) $20.00 each.

crates of high quality or OEM gaskets.

crates of electrical items-ign(brain)boxes/coils/ign. plates(on right side of engine)/crank triggers&advancers/points plates/self cancelling blinker boxes/flasher units/handlebar controls/ign. switches/fuse boxes/reg-rectifers/a few stators ect.. some gs400-1000 parts also.

gs1150E gauges complete 9 out of 10 condition/low miles $150.00 shipped firm.

gs1150E gauges complete (DAMAGED)$60.00 shipped USA lower 48.

new in boxes- 1150e headlite brackets **ALL** THE PARTS TO CHANGE YOUE ES INTO AN E(not available anymore).

1150E gauge bracket(brand new in box).

1150 tool trays and tool kits(trays w/ tool kits are $35.00 each).

GS1150 owners manuals.

1150E handlebars $35.00 per set.

1-) V&H intake cam w/ slotted sprocket..fits 750-1150 16v. $150.00.

cyl. heads 1100/1150 stock/race $100.00 and up.

stock cams $75.00 and up per set.

i have roughly 25 sets of vaccum carbs(maybe 2 sets of VM26/parts). sizes are 32mm-34mm-36mm/i have a couple sets for parts only. maybe a couple sets of early GSXR/KATANA 34mm 1100 carbs/parts. all are dirty and need cleaned/$100.00 per set/call about a certain carb parts and price.

Dynojet jet kits/new in the box..differant makes and models $50.00 each and up.

virgin transmissions complete(both shafts)(15 or so)$100.00 each set.

stock clutch baskets (15 or so)$50.00-$100.00 each.

crates of alt. rotors& starter clutch parts(80-82 16 valve(these parts are getting low).

engine fasteners(nuts/bolts/shims ect..

billet pm brake calipers.

new and used cast iron& stainless after market rotors(all name brands).

a crate full of street&race aluminum sprockets*530/630*(new&used).

countershaft sprockets from zero-4" offset 13-16 tooth.

***2- complete orient express funnybike 3 speeds complete($1500.00 each)***these transmissions are $3000.00 each when purchased new***i will make a package deal on both 3 speeds w/ extra forks ect..CALL ME FUNNYBIKE/TURBO GS GUYS***

1- complete alky turbo S&S 2 1/4" super D carb/poppets/kinsler/mr. turbo/ complete AN braided lines/many many extra,s/tuning info/this is set-up for a hillborn pump drive($1000.00 or b.o.) this is a 6 second/200mph set-up.

serveral sets of wheelie bars all sizes($75.00 and up per set).

several sets of struts for GS/KZ/CB some with WB mounts.

*******THAT IS SOME OF THE PARTS THAT I HAVE/I RECOMEND CALLING ME FOR WHAT EVER SUZUKI GS PART YOU MAY BE LOOKING FOR/I ALSO RECOMEND DRIVING TO ME TO TAKE A LOOK OR TO MATCH UP A PART YOU ARE NOT SURE ABOUT********

***over 20 years worth of parts hording and experiance with putting these parts togather for myself and others for high performance street or all out drag racing***.

***IF YOU HAVE ANY QUESTIONS PERTAINING TO THESE MODELS OF SUZUKI'S/ALL IT WILL COST YOU IS A PHONE CALL/I DO NOT CHARGE FOR INFORMATION AND I WILL HELP ANY WAY POSSIBLE WITHIN REASON ***.

***I AM NOT GETTING OUT OF RACING OR BUILDING THESE BIKES..I JUST HAVE MORE PARTS THAN I COULD USE IN A LIFETIME........ ***.

thanks,

terry

call between 9am and 12 midnight..

513-420-0123.

cell 513-571-1907 please only call the cell if i cant be reached at the first number.

***if you choose to email me...chances are you will not get an answer in a timely manner***please call instead***

More...