ICEMAN Posted May 11, 2010 Author Report Share Posted May 11, 2010 you have to have a catch can to catch overflow fluids. tracks don't like you dripping oil/gas/waterohhh. i didnt even think about that. i need to do that!!! Quote Link to comment Share on other sites More sharing options...
RR_MIKE Posted May 11, 2010 Report Share Posted May 11, 2010 sweet. thx! i gotta ask... catch can for what?so what is the point of the lil plate and 2 bolts on the front sprocket?yah ill be dropping the forks thru a lil bit!! bout an inch or 2.man, look at that hair fly!!!!you did all the motor work then, i did all the bearing work now. so now its a real good runnin bike!yup, and rebuilt the forks.. i also found a bag with a bunch of wheel bearings and other bearings i got for it and didnt get on(forgot i had'm,coulda saved ya some money lol)..i'll get'm to ya when i see ya next..aand next time ya redo the topend,if ya want it ported,lemmie know..i can do your cr250 also.. Quote Link to comment Share on other sites More sharing options...
ICEMAN Posted May 11, 2010 Author Report Share Posted May 11, 2010 yup, and rebuilt the forks.. i also found a bag with a bunch of wheel bearings and other bearings i got for it and didnt get on(forgot i had'm,coulda saved ya some money lol)..i'll get'm to ya when i see ya next..aand next time ya redo the topend,if ya want it ported,lemmie know..i can do your cr250 also..haha nice! thx man!! ya ill let you know! i definitely need wheel bearings. theres some play in the front wheel on the dirt rims. Quote Link to comment Share on other sites More sharing options...
RR_MIKE Posted May 11, 2010 Report Share Posted May 11, 2010 haha nice! thx man!! ya ill let you know! i definitely need wheel bearings. theres some play in the front wheel on the dirt rims.some of that wiggle could be spoke tension,or lack of i should say lol.. check and see if the spokes are tight.. Quote Link to comment Share on other sites More sharing options...
ICEMAN Posted May 11, 2010 Author Report Share Posted May 11, 2010 some of that wiggle could be spoke tension,or lack of i should say lol.. check and see if the spokes are tight..you can see the hub (entire wheel) moving a lil bit, but the hub is not moving seperately from the rim when i wiggle it. its def the bearings.(its nice to be on a forum where people actually talk about bikes, huh?) haha Quote Link to comment Share on other sites More sharing options...
RR_MIKE Posted May 11, 2010 Report Share Posted May 11, 2010 you can see the hub moving a lil bit. its def the bearings.ah,right on... Quote Link to comment Share on other sites More sharing options...
yotaman88210 Posted May 11, 2010 Report Share Posted May 11, 2010 Yea it is a catch can. I have two... one is a gatorade bottle The front sprocket is held in plate with the place and two bolts. If you think about it, it is not possible for the sprocket to back off with the plate and two bolts. Thats just how it works Quote Link to comment Share on other sites More sharing options...
ICEMAN Posted May 11, 2010 Author Report Share Posted May 11, 2010 i was wondering what the other bottle was! lol. Quote Link to comment Share on other sites More sharing options...
4DAIVI PAI2K5 Posted May 11, 2010 Report Share Posted May 11, 2010 i dont like that method to hold the sprocket on, seems to allow a bunch of slop in the sprocket which would cause the drive shaft to wear out pre mature. Quote Link to comment Share on other sites More sharing options...
ICEMAN Posted May 11, 2010 Author Report Share Posted May 11, 2010 i dont like that method to hold the sprocket on, seems to allow a bunch of slop in the sprocket which would cause the drive shaft to wear out pre mature.i dont like it either. Quote Link to comment Share on other sites More sharing options...
4DAIVI PAI2K5 Posted May 11, 2010 Report Share Posted May 11, 2010 Im wanting on Kevin to comment... Quote Link to comment Share on other sites More sharing options...
ICEMAN Posted May 11, 2010 Author Report Share Posted May 11, 2010 Im wanting on Kevin to comment...whos kevin? dont say first names... LOLi guess i cant really say i dont like it, ive never had it on any bike before, that i know of. im still trying to figure out how it works. i cant without being home and looking at it. Quote Link to comment Share on other sites More sharing options...
4DAIVI PAI2K5 Posted May 11, 2010 Report Share Posted May 11, 2010 yota. i know im gonan get a sweet quote from him haha Quote Link to comment Share on other sites More sharing options...
yotaman88210 Posted May 11, 2010 Report Share Posted May 11, 2010 I just hate when parks wears out pre mature and i dont get enough life outta him and his shaft. Sucks Quote Link to comment Share on other sites More sharing options...
4DAIVI PAI2K5 Posted May 11, 2010 Report Share Posted May 11, 2010 Ha there it is! haha Quote Link to comment Share on other sites More sharing options...
yotaman88210 Posted May 11, 2010 Report Share Posted May 11, 2010 Well I had to do something with it! Quote Link to comment Share on other sites More sharing options...
4DAIVI PAI2K5 Posted May 11, 2010 Report Share Posted May 11, 2010 I was trying to word it just right for you to work with haha. Quote Link to comment Share on other sites More sharing options...
yotaman88210 Posted May 17, 2010 Report Share Posted May 17, 2010 Back together yet? Quote Link to comment Share on other sites More sharing options...
ICEMAN Posted May 18, 2010 Author Report Share Posted May 18, 2010 i just got my 12's last night. so i got the front wheel on, cleaned up the header (it was REALLY bad). got that on. im still cleaning up the rear brake set-up. going to buy an o-ring chain at schiets today when i get it, hopefully we have the 420 i want, in stock.heres the latest after last night.frontrearwith new lightweight sprocketfinally with front on!good thing i got this supermoto style fender. The dirt one would look Ritard'd. this one is about 4 inches shorter in the front.with header cleaned up and put onthe packing that was in it. yummy!! getting this repacked today.now clean Quote Link to comment Share on other sites More sharing options...
RR_MIKE Posted May 18, 2010 Report Share Posted May 18, 2010 (edited) thats a brand new chain i put on maybe a year ago.. your gonna put a 420 on an 80? wtf for? thats just a tad big aint it? lol...and that pic of the silencer,i cleaned the holes and repacked that when i had it,but its a yearly thing to do anyhow..man that thing went downhill bigtime after i got rid of it lol....its come'n together AGAIN nice though..damn things like a cat,it must have 9 lives lol.. did i mention it was stolen from a cop in ottawa hills? hahahahaha j/k...oh, and i found new in the package spare fork seals and some wheel bearings for it in the garage... Edited May 18, 2010 by RR_MIKE Quote Link to comment Share on other sites More sharing options...
ICEMAN Posted May 18, 2010 Author Report Share Posted May 18, 2010 thats a brand new chain i put on maybe a year ago.. your gonna put a 420 on an 80? wtf for? thats just a tad big aint it? lol...and that pic of the silencer,i cleaned the holes and repacked that when i had it,but its a yearly thing to do anyhow..man that thing went downhill bigtime after i got rid of it lol....its come'n together AGAIN nice though..damn things like a cat,it must have 9 lives lol.. did i mention it was stolen from a cop in ottawa hills? hahahahaha j/k...oh, and i found new in the package spare fork seals and some wheel bearings for it in the garage...awesome thanks man thx!! yah it did go downhill a lil bit. im steel wool'n everything to shine it all back up. like the bottom of the forks, the levers, rims, sprockets, rotors, etc... thats why its takin so long, im makin everything look good again. steel wool'd the motor too!!the sprockets i have are 420 sprockets. your chain looked like a 220 chain.the chain you had still looks good, just needs cleaned, but i want an o-ring chain for the supermoto.as long as it was stolen from officer white!!! hahahawhat can i do to clean those holes? im gonna have to drill em all out. Quote Link to comment Share on other sites More sharing options...
RR_MIKE Posted May 18, 2010 Report Share Posted May 18, 2010 use a wirewheel to get the crustys off, then get a stiff piece of wire and go though the holes lol... Quote Link to comment Share on other sites More sharing options...
rawlins87 Posted May 18, 2010 Report Share Posted May 18, 2010 Coming along nicely Quote Link to comment Share on other sites More sharing options...
ICEMAN Posted May 18, 2010 Author Report Share Posted May 18, 2010 use a wirewheel to get the crustys off, then get a stiff piece of wire and go though the holes lol...are we talking about the same thing?? hahaha. yah ill use that. i have a wire brush for my drill so ill just use that.Coming along nicelythank ya!! Quote Link to comment Share on other sites More sharing options...
NeverEnough Posted May 18, 2010 Report Share Posted May 18, 2010 DO WANT. drooooooooollllll Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.