RidersDiscount Posted July 25, 2012 Report Share Posted July 25, 2012 (edited) T-Handle sockets can be found in just about every professional bike mechanic’s toolbox thanks to their ability to make many jobs easier and faster. If you’re looking to add T-Handle convenience to your toolbox, but don’t want to worry about fitting an entire set, Motion Pro has the answer in their square drive Spinner T-Handle.The Motion Pro Spinner T-Handles feature your choice of ⅜” or ¼” sizes so that you can snap your own sockets right on and go right to work. Similar to standard T-Handle sockets, the Spinner has a lot of reach, allowing you to get into hard to reach areas without losing the leverage you need to break loose a stubborn bolt. The feature that sets it apart from others is the addition of floating spinner grip on the shaft of the tool. This lets you firmly hold the socket in place while spinning it freely in either direction. To further aid in the spinning of the tool, Motion Pro gave it a heavy, rubber coated handle that gives you a comfortable grip.The Motion Pro Spinner gives you the same speed and convenience of a standard set of T-Handle sockets, but with a lot of added versatility and a lifetime warranty. You can order yours from Riders Discount by getting in touch with Nathan at 866.931.6644 ext. 809, or by sending a PM through this forum. If email is more convenient, feel free to send one to FORUM at RIDERSDISCOUNT dot COM and we’ll get back to you right away!Motion Pro Spinner T-Handle The Spinner T-Handle features a heavy, rubber coated grip that makes it easy to get leverage and to spin it.⅜” square drive (also available in ¼”) means that you can grab one of your sockets and go right to work.The blue anodized spinner section is laser etched and features low friction bearings for easy spinning while you keep pressure on the fastener. Edited October 31, 2014 by RidersDiscount Quote Link to comment Share on other sites More sharing options...
RidersDiscount Posted August 13, 2012 Author Report Share Posted August 13, 2012 (edited) These are in stock ready to ship in either 3/8" or 1/4". Edited August 14, 2012 by RidersDiscount Quote Link to comment Share on other sites More sharing options...
Hoblick Posted August 14, 2012 Report Share Posted August 14, 2012 awwwe man.. another tool i needalthough already have some motion pro T handles this would come in handy Quote Link to comment Share on other sites More sharing options...
RidersDiscount Posted August 14, 2012 Author Report Share Posted August 14, 2012 I just got one myself. I haven't touched my ratchet since. Quote Link to comment Share on other sites More sharing options...
RidersDiscount Posted November 28, 2012 Author Report Share Posted November 28, 2012 Have some maintenance or modifications planned for the winter? The Motion Pro Spinner T-handle can make these tasks a lot easier. Riders Discount has them in both 3/8" and 1/4" sizes, so you just need to attach the socket of your choice and go to work. Quote Link to comment Share on other sites More sharing options...
4DAIVI PAI2K5 Posted November 28, 2012 Report Share Posted November 28, 2012 I have some non spinner ones. Guys these things are so handy. I hardly use ratchets any more. Quote Link to comment Share on other sites More sharing options...
RHill Posted November 28, 2012 Report Share Posted November 28, 2012 Damnit, I just bought a harbor freight one 2 weeks ago. Not nearly as fancy, wish I would have held off. Quote Link to comment Share on other sites More sharing options...
The Punisher Posted November 28, 2012 Report Share Posted November 28, 2012 Nice! I might be interested in both sizes! Quote Link to comment Share on other sites More sharing options...
RHill Posted November 28, 2012 Report Share Posted November 28, 2012 Any idea of the overall length? Quote Link to comment Share on other sites More sharing options...
RidersDiscount Posted November 28, 2012 Author Report Share Posted November 28, 2012 Nice! I might be interested in both sizes!Let me know when you want to pull the trigger and I'll get you sorted.Any idea of the overall length?I only have the 3/8" on hand and that was 13" tip to handle. The 1/4" would be about 14.5-15" tip to handle. Quote Link to comment Share on other sites More sharing options...
QuikAccord Posted November 29, 2012 Report Share Posted November 29, 2012 What kind of deal can you get me on a pbr and chain alignment tool? Quote Link to comment Share on other sites More sharing options...
jdonn Posted November 29, 2012 Report Share Posted November 29, 2012 How much for both?!?! Quote Link to comment Share on other sites More sharing options...
vw151 Posted November 29, 2012 Report Share Posted November 29, 2012 I have a couple Motion Pro T-handles, great tools. Quote Link to comment Share on other sites More sharing options...
Rctaylor Posted November 29, 2012 Report Share Posted November 29, 2012 How much for both?!?!Interested in both as well, if you could PM. Quote Link to comment Share on other sites More sharing options...
RidersDiscount Posted November 29, 2012 Author Report Share Posted November 29, 2012 How much for both?!?!Interested in both as well, if you could PM.Sent you guys PMs Quote Link to comment Share on other sites More sharing options...
RidersDiscount Posted November 29, 2012 Author Report Share Posted November 29, 2012 (edited) What kind of deal can you get me on a pbr and chain alignment tool? Edited October 31, 2014 by RidersDiscount 1 Quote Link to comment Share on other sites More sharing options...
QuikAccord Posted November 29, 2012 Report Share Posted November 29, 2012 Their PBR chain tool. Quote Link to comment Share on other sites More sharing options...
QuikAccord Posted November 29, 2012 Report Share Posted November 29, 2012 P b rr r ie e vs a es k t Quote Link to comment Share on other sites More sharing options...
RidersDiscount Posted November 29, 2012 Author Report Share Posted November 29, 2012 PM sent Quote Link to comment Share on other sites More sharing options...
Rctaylor Posted November 29, 2012 Report Share Posted November 29, 2012 Thanks nathan! Quote Link to comment Share on other sites More sharing options...
The Punisher Posted November 29, 2012 Report Share Posted November 29, 2012 The chain alignment tool is $17 and a PBR is about $10 for a 12-pack at the gas station But seriously, what are you referring to with PBR? Quote Link to comment Share on other sites More sharing options...
madcat6183 Posted November 29, 2012 Report Share Posted November 29, 2012 Nate, PM me with price for both. May have the wife get these for me for Christmas, look real nice. Quote Link to comment Share on other sites More sharing options...
The Punisher Posted November 29, 2012 Report Share Posted November 29, 2012 Nate, PM me with price for both. May have the wife get these for me for Christmas, look real nice.X2 will make nice stocking stuffers! Quote Link to comment Share on other sites More sharing options...
ScubaCinci Posted November 29, 2012 Report Share Posted November 29, 2012 Got mine today...very nice & appears to be high quality. Quote Link to comment Share on other sites More sharing options...
RidersDiscount Posted November 29, 2012 Author Report Share Posted November 29, 2012 Nate, PM me with price for both. May have the wife get these for me for Christmas, look real nice.X2 will make nice stocking stuffers!PMs on their way fellas Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.