ninjascott

Wow, You really are lucky, this could have happened after you were married to her with kids then it would have been much harder to walk away from this situation. 4 dates who cares quality over quantity any day for me. Dude you are a good guy,be patient it will all work itself out.

I find it odd I have a glock 21c. owned it for years even ran a bunch of hot reloads thru it and never a prob. I even used it to qualify for my ccw. My uncle is a gunsmith and at one time or another I have owned just about evey kind and caliber hand gun out there. I traded my kimber fo the glock and am glad I did.

I've had good luck at andersons general store on sawmill seem to be cheapest prices.

pwc's are fun,the two strokes are kinda of a pain to deal with, 2cycle oil and plugs foul out. 4strokes are less work but cost more to buy. I have owned several different skiis and the thing with them is you have to have two to have fun and if your like me my friends trash my shit plus the time available to ride is limited in ohio to about twelve weeks or so, for me I work during the week and have weekends off so that limits me to about 24 days avaliable now out of those days i have stuff around the house to do mow the lawn and what not so that cuts my days down to 12 it usually rains on the days I want to go out so truth be told I have $7500 wrapped up in two pwc's rode them 4 times this year. now I have to winterize them and store them. On the other hand my raptor I have been to wayne more times than I can count and I ride year round its actually pretty fun in the snow. With just about $3500 in my 4wheeler. It seems bang for your buck you get more frome the quad. I have a friend that is selling an 07 raptor(fuel injected) for like $3500 which is about a grand less than what they go for on craigslist

Is your friend in ohio?

anyone ever used these? http://cgi.ebay.com/ebaymotors/4-Brand-New-255-35-20-TRAINGLE-TR968-255-

unfortunatley those are too tall. i need either a 255/35/20 or 245/40/20. A quick lesson on calculating tire size for those who want to know. example 245/45/20 the first number is the width of the tire in millimeters, measured from sidewall to sidewall. to convert to inches,divide by 25.4. in the example above the width is 245mm or 9.645 inches. the second number is the aspect ratio. this a ratio of sidewall height to width. in the example above, the tire is 9.645" wide multiply that by tha aspect ratio to find the height of one sidewall. in this case 245x.45=110.25mm or 9.645x.45=4.34" the last number is the diameter of the wheel in inches. to figure the outside diameter of a tire, take the height of the sidewall multiply by 2,(remember that the diameter is made up of two sidewalls , the one above the wheel and the one below the wheel) then ad the diameter of the wheel to get your answer. example 245/45/20 245mm x .45=110.25 x 2 =220.5 +508mm(20")=728.5mm or 28.68"

the ninja went 10.40 best and the gsxr went 11.10 best. the fastest guy all day was a r1 raven with a 10.15. there was a b king his best was 10.20. and a fz1 with a wheeelie bar that was runnin like 12.20's. But the best one was a yamaha raider this guy was leavin so hard the bike was pullin the front wheel like every bit of 10 oclock and he was givin the fz1 fits.

I have a nearly new set (less than 1000 miles) of sumitoma 275-50-20 not sure they will fit or not. they are 30.8" tall by 9 wide.

for sure let me know

I'm lowering my dakota as a winter project and I need a set of 20's like 245-40-20, between 27 and 27 3/4 tall. What do ya got or who do you know? I found a place that will wholesale them for 105 a tire for some off the wall name but they are new. tryin to be like 150-200 on 4 good used ones.

make sure to get in touch with me I belong to a gun club and can move almost all if not all of those for you and get you top dollar.

Just my 2cents. 1900 trade in is like almost 2100 cash(depending on the tax rate of county you live in) cause you dont pay tax on your trade in.

What about say....a ratsnest?

Ok 44 views and not one comment? What is your opinion?

Got a super clean 97 yzf600r ith like 34k on it. runs strong shifts smooth vance and hines exhaust good tires. any question send me a PM. bike is on the west side of columbus craig's list link http://columbus.craigslist.org/mcy/1473298692.html

Joe Carson in lancaster sells harley and honda. As a salesman at a dealership that carried hyosung I can only say they deserve each other the quality is the same junk!!

I want to lower my 97 dakota 3" in front and 4" in rear but I want a quality ride still so I've looked into spings and shock kits and what not I found these torsion bar keys on e-bay anyone know about these things? is this a cheap way to lower my truck or a gimick? http://cgi.ebay.com/ebaymotors/97-04-Dodge-Dakota-Durango-1-3in-Lowering-Keys_W0QQitemZ370289916758QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item5636ffbb56

Its a lowering strap for the front of a bike, used by drag racers to take the rebound out of the forks so the bike wont wheelie as easy. Others my use them for other reasons but that is the only use I know of.

Good lookin out!! I will do that.

If it were me I would find a used junk yard motor and have it thrown in.Seems like the cost is about the same, I bought a 80k mile 5.4 for mine for like 900 paid 500 labor(guy I found on CL) had some stuff done like new plugs n wires and fluids all together it was like 1700. I've since sold the truck to a friend who still has it it has almost 300k on it now did the swap at like 160. Its been my experience with ford motors if they have been overheated they never run right after that. seems as if it does long term damage to the rest of the parts and failure is a lot more likely. Again just my 2 cents

I gotta get on pass time I watch every episode I tivo it so i can fast forward the commecials I beat ken harring almost every time.