34bboley

Thanks, Sean! Mods, lock it up. Sold on FT86 forum.

http://mansfield.craigslist.org/pts/4673379165.html

What are the dimensions?

Just listed on FT86Club

bump

We have had these for awhile and they have been collecting dust, as you will see once we load the pictures. These were literally driven from the dealership to our shop to have some CCW's put on. Obviously, besides the dust, these are show room new. $400 OBO 17x7 +48 offset 5x100 http://i1273.photobucket.com/albums/y409/wheelmedic/IMG_20140815_105042629_zpsdd15a0c6.jpg http://i1273.photobucket.com/albums/y409/wheelmedic/IMG_20140815_104944190_HDR_zps3311e9f0.jpg http://i1273.photobucket.com/albums/y409/wheelmedic/IMG_20140815_104936635_zpsd6c238ca.jpg

We can refinish the wheels, you would get club pricing--as do all members on CR. If you want to get new wheels you can do that, too--but what are you going to do with the wheels that need refinished?

PM'd, we do this of work all the time.

Feel free to let any other forums you know of about these. Thanks!

19" Porsche Centerlock wheels: -Very lightweight (magnesium). -Less than 500 miles on them. Powdercoated GLOSS BLACK. -There are no center lugs or tires with these. -Many more pictures available, please send a text or email and I will send you as many as you would like. -Not perfect, but definitely a B+ grade, and I am conservative on my grading. There is some minor curb rash on the rear lips. The front faces and lips have only very minor wear. -Fronts: 19"x9" -Rears: 19"x12" Significant weight savings at 17.x lbs for the fronts and 20.x lbs for the rears. http://i1273.photobucket.com/albums/y409/wheelmedic/DSC00369_zpsb2b1e2dc.jpg http://i1273.photobucket.com/albums/y409/wheelmedic/DSC00368_zps2d742766.jpg http://i1273.photobucket.com/albums/y409/wheelmedic/DSC00405_zpsf2c245e8.jpg http://i1273.photobucket.com/albums/y409/wheelmedic/DSC00383_zpsf1bf98e5.jpg http://i1273.photobucket.com/albums/y409/wheelmedic/DSC00379_zps49515310.jpg $3800

Still have them!

That price for four sensors is a very good deal.

You are going be looking between $185 and $195 depending on whether you have the TPMS or non-TPMS wheel.

If you would like to bring it in, we will check it out free of charge. We could also locate you one if you wanted. Let me know what route you'd like to explore.

We can refinish the blemishes.

$3000 is where he is wanting to start, I believe. Thanks for noticing that!

I am listing this for a friend who does not have internet access at this time. Please contact him directly with any questions or offers. Dave @ 614-361-5882 He doesn't respond to texts. This is an ad for the following: 454 4 bolt main with steel crank Used assembly, 12.5 TRW, 7/16 rod bolts. Rod bearing/main bearings/rings. Tanked and cleaned. Those rods are easily $160 a piece. Price a replacement motor. The guy that built this has been in the business for over 53 years and is highly sought after. (Floyd in Sidney, OH). Feel free to make a reasonable offer, but realize what you are looking at. $3000 is a starting price. http://i35.photobucket.com/albums/d172/cinergi/454-1.jpg http://i35.photobucket.com/albums/d172/cinergi/454-2.jpg http://i35.photobucket.com/albums/d172/cinergi/454-3.jpg

I am listing this for a friend who does not have internet access at this time. Please contact him directly with any questions or offers. Dave @ 614-361-5882 He doesn't respond to texts. this is an ad for the following: 454 tanked, bored, .250, steel 4" crank, 43 40 rods, 13:1 JE pistons, cold rolled, wrist pins, balanced assembly, bored and honed, torque plate, cam bearings, 250 long, tall block, poured. $1700 in crank, rods and pistons alone. NEVER turned over. Build sheet available, $3900 in parts and labor alone. The guy that built this has been in the business for over 53 years and is highly sought after. (Floyd in Sidney, OH) Feel free to make a reasonable offer, but realize what you are looking at. http://i35.photobucket.com/albums/d172/cinergi/454p1.jpg http://i35.photobucket.com/albums/d172/cinergi/454p4.jpg http://i35.photobucket.com/albums/d172/cinergi/454p2.jpg http://i35.photobucket.com/albums/d172/cinergi/454p3.jpg

I am listing this for a friend who does not have internet access at this time. Please contact him directly with any questions or offers. Dave @ 614-361-5882 He doesn't respond to texts. This is an ad for the following: Vortec Cheverolet truck motor.... It is: tanked, cam bearings, bored, honed, torque plate. .30 over, clevite bearings, moly rings, rods reworked, new rod boat. GM regular rods -- not vortec which are junk. Crank was reworked, balanced rotating assembly, heads were tanked and cleaned. Valve job performed, springs and retainers. Needs a cam, injectors and distributor. This is an EXPENSIVE build that was done by a guy who has been building for 53+ years. (Floyd out of Sidney, Ohio). http://i35.photobucket.com/albums/d172/cinergi/votec3.jpg http://i35.photobucket.com/albums/d172/cinergi/vortec1.jpg http://i35.photobucket.com/albums/d172/cinergi/vortec2.jpg http://i35.photobucket.com/albums/d172/cinergi/vortec4.jpg

BRZ with custom HRE's: http://i35.photobucket.com/albums/d172/cinergi/hrebrz1.jpg http://i35.photobucket.com/albums/d172/cinergi/hrebrz.jpg

Here's some stuff we have done, both recently and in the past: Fully custom 28's http://i35.photobucket.com/albums/d172/cinergi/red23.jpg Candy purple valve cover: http://i35.photobucket.com/albums/d172/cinergi/valvecoverecotech.jpg Switzer GTR: http://i35.photobucket.com/albums/d172/cinergi/switzer.jpg http://i35.photobucket.com/albums/d172/cinergi/switzeragain.jpg http://i35.photobucket.com/albums/d172/cinergi/switzeragain.jpg PVD ICE CHROME: http://i35.photobucket.com/albums/d172/cinergi/pvdicechromecaddy.jpg '14 Spark: http://i35.photobucket.com/albums/d172/cinergi/spark.jpg Skittles: http://i35.photobucket.com/albums/d172/cinergi/skittles.jpg PVD Valve Cover: http://i35.photobucket.com/albums/d172/cinergi/pvdchromevalvecovers.jpg Black Accord, Pink wheels: http://i35.photobucket.com/albums/d172/cinergi/accordpink.jpg Custom Forgiato: http://i35.photobucket.com/albums/d172/cinergi/forgiato.jpg http://i35.photobucket.com/albums/d172/cinergi/lambo.jpg

Forgeline ZX3R 5x112 Original application: C63, but check offset below for your application. This set of wheels is a one-off, custom design that was done. It is fully custom and even has titanium bolts. These will definitely stand up to a high-use environment. Forgeline Competition Series lightweight forged racing wheels are engineered for race cars and dedicated track duty. They are made from forged 6061-T6 aluminum and include features like I-beamed spokes, deeply-machined centers, and aggressive load ratings to be extremely strong, extremely stiff, and extremely lightweight. Forgeline’s advanced three piece racing wheel, the ZX3R. Thanks to a combination of advanced engineering, forged 6061-T6 aluminum centers, and heat-treated rim shells, the ZX3R delivers an unbeatable combination of light weight, excellent stiffness, and exceptional fatigue strength along with the convenience, repairability, and affordability of its three piece design. Learn more about the Forgeline ZX3R at http://www.forgeline.com/products/competition-series/zx3r.html. - See more at: http://blog.forgeline.com/tag/zx3r/#sthash.yMzsT422.dpuf Rears are 18x10 with 52mm offset Fronts are 18x9 with 42mm offset Hub is 66.6 http://i35.photobucket.com/albums/d172/cinergi/DSC00446.jpg http://i35.photobucket.com/albums/d172/cinergi/DSC00447.jpg http://i35.photobucket.com/albums/d172/cinergi/DSC00441.jpg http://i35.photobucket.com/albums/d172/cinergi/DSC00443.jpg http://i35.photobucket.com/albums/d172/cinergi/DSC00444.jpg http://i35.photobucket.com/albums/d172/cinergi/DSC00442.jpg $3750

We've been here awhile, took some time off and now we are back. Let us know if you need anything or have any questions. We have special pricing available for CR members. I shall be posting some pics and prices of various wheels we have in inventory as well. Stay tuned!

It is currently filled, however, we are always accepting applications & are looking for a mobile sales tech if interested. Stop by the shop Mon-Fri 8am-5pm.

Full Time Powder Coater Position Available Immediately. Automotive experience preferred, but will train motivated person. Must be able to lift 60lbs.+, repeatedly on a daily basis. Consistency & attention to detail a must. 40 Hours, Monday-Friday 8am-5pm. Benefits available after 90 days. -No nights; No weekends! Small Family Owned Shop since 1997. Wheel Medic is located at 2971 Silver Dr. Columbus 43224 Open Interviews Wednesday, May 14 & Thursday, May 15: 9am-Noon. Stop by the shop during business hours to apply in person. Email resume's to: hannah@wheelmedic.com