Jump to content

Doomking

Members
  • Posts

    292
  • Joined

  • Last visited

Posts posted by Doomking

  1. Will do..perhaps a later start since the temps are going to be colder this weekend.

    i am planning to go out 8:30-9:00 and heading south on 83 toward  millersburg and ride some of the roads around there and than heading back home, 3-4 hrs ride at the most....

  2. Checked the rotors and they are clean.

    buttons are all stuck with no play.. I am bit confused here. Is the rotor supposed to be floating on those buttons? In other words should I have any kind of play when I try to push the buttons or spinning it?

    right now both rotors have those round buttons all firmly attached to the rotors both sides.

     

  3. Hello
    I just noticed that when I come to a stop at slow speed the brakes are "pulsing" like the rotor might be warped, however at any other speed say over 20 mph up to 100 plus, the brake feels solid with no pulsating feeling whatsoever, so to speak.
    So if the rotors were warped wouldn't it pulsate at any speed? Why only at slow speed when I come to a stop light?
    Also I have no feed back of any kind to the brake lever just a "pumping " motion of the forks as I come to a stop.
    Pads look in good shape as well as the rotors from a visual inspection.
    Should I replace pads first see if it cures it or replace rotors?
    Any idea?
    Thanks for the help.

  4. 10 hours ago, DerekClouser said:

    Myself and a few others will likely be coming from the Cleveland/Akron Area.  We will likely meet at the Minit Mart at 83/250 in Wooster.   (825 Dover Rd, Wooster, OH 44691) 

    I'm not sure of the time at this point, but I will let you know.  

    Fantastic....please keep me posted on times and location.

    Thanks!

  5. Thanks Jim for your info.

    ill try to head out around 10am and perhaps take the 62w 520 w you mentioned and than back home.

    just a quick ride to enjoy the nice weather.

    anyone is welcome to join if you wish,  for this quick getaway.

  6. Hello

    I am thinking on Sunday morning to head out from the circle K at intersection of 82 and 83 in Grafton around 9am for a couple of hours of riding.

    Does any of you know any fun route to go to leading off 83 that would be worth riding?

    thanks for all the help.

     

     

     

  7. Hey ninja

    been off the saddle for a while.

    work and family took most of my time off the last few years.

    bought myself another bike just recently and looking forward to get some miles down before it get too cold.

    lets hope some folks will come down from up here so I can tag along.

    take care hope to see you soon.

    • Beer 1
  8. Hi

    I have a 2003  Kawasaki Zx11D

    It has been running fine until today.

    Got up to go to work, started the bike as usual, went down the street to the gas station to gas up.

    Stopped the engine, filled up, turned ignition key to on position, lights on dash board on everything as usual.

    Pressed the START button, and the bike went dead.

     

    So took bike apart at the station, and there is an electric module next to the fuse box. Checked all the fuses and they were all ok.

    After few minutes the power came back on its own.

    Pressed the Start button and again the bike went dead, like there was a short and you can hear a little clicking noise to the before mentioned module.

    Waited a few more minutes and the power came back on once again.

    I pushed start the bike and off I went to work.

    Came back home the same way.

     

    Any idea on what's going on? Did I confuse you guys enough?

     

    All the help will be as usual greatly appreciated.

     

    Thanks

    Fabio

  9. "BTW, how've you been? Haven't seen/talked to you since NinjaDoc's ride last year."

    Not too bad. Shortly after the ride last year my wife found cancer in her breast and she has been battling with it ever since.

    We used to enjoy riding together, hopefully she will be in better shape once the treatments are over by the end of this month.

    Thanks for all the mounting tips.

×
×
  • Create New...