Dave1647545494

Passen might have what you want or advanced imports

that said spray the be-jesus out of it its the only way to go

Fuck LT-1 f-body's that is all welcome to the board btw

rewire it to the ignition so its hot with the key in the start or run position. that will fix it. just use one wire. the way the factory wired it is retarded and doesn't work very well hth

stuck fan relay is most likely the culprit

thanks for the plug Berto. my contact info is in the vendor section. Scott also does good work you won't go wrong with either one of us

your not supposed to be proud of being a drunk....

just read the first post and replied. take it to scott he does good work.

what kind of car?

being hot is no excuse to be a retard/ thats like the biggest turnoff ever your cute but you have IQ of a rock. if that works for you great, not for me

ahhh, Mister Spellcheck you came back. don't make assumptions there buddy. just becuase I can't type very well doessn't mean that I didn't go to college. going to college also doesn't always mean a cushy high paying desk job either I chose to become self employed doing historical renovation, remodles , and other general construction, becuase the work is challenging and fun not becuase of the amount of income it turns out. I was making fun of republicant becuase he hasn't been at OU a whole quarter yet and he thinks he can drink. I went to OU I know what goes on. talk shit after winter quarter you might be able to hang by then. lata

Get to the Summit Racing Equipment Retail Store in Tallmadge (1200 Southeast Ave.) from 6:00 pm-8:30 pm on September 27 for the season`s last Monday Night Cruise-In presented by R&R Entertainment and The Handy Randy Show! Bring your ride, bring a friend, or bring your whole car club--just get to the Monday Night Cruise-In to compete for one of several complimentary show awards. Want a few more reasons to come? * This cruise will be televised on The Handy Randy Show, Sunday, October 3 at 8 pm (Channel 29/35) * John Jensen, Ohio`s #1 Elvis impersonator will be there to entertain you * The Tallmadge Police Department`s 725 HP Pro Street D.A.R.E. car will be there * Food vendors will be on-site * Door prizes * 50/50 raffle that benefits a local charity * Admission is free! Make plans to come to Summit Racing Equipment for the final Monday Night Cruise-In. Need directions? Log on to http://www.summitracing.com/redir.asp?email=40912 or call 330-630-0250. (A rain date has been set for October 4, 2004) While you`re at the Summit Racing Equipment Retail Store, stop in and see what`s new...from Manager`s Specials to the Clearance Section, you might just find an unbeatable deal on that part you`ve been looking for!

this is for your neon I'm assuming. just go tot hte junkyars and find a nice and put it in your self its easy to do. same with the carpet you just have to get to the car before the weather gets to the interior parts

pfft... kids, most of you probably can't drink a six pack without hugging the shitter all night.

wtf are you on drugs? hows that gtp runnin?

18.2 @ 79 too slow I put a turbo on it

my dad might be interested 203-8844 ask for dave sr.

staged batch fire extra injectors smile.gif

man I do this shit for a living. a remodel or a renovation over a certain number of square feet requires a permit. replacing a busted pipe or a leaky toilet does not. if you are the home owner and you do the renovation yourself you arer required to pull a permit but do not need a lisence if you are a contractor then you need the permit and the lisence. make sense?

fuck do you have 4 more I need four of them

a gen 1 sbc will not blow a HG and leak oil down the block. its leaking at the back of the intake manifold or around the base of distributor. if the back of the manifold leaks take a centerpunch and dimple the rail where the gaskets sits it'll help it seal better. I don't care that it still leaks thats just like a fucking car to break again somewhere else as soon as you get done fixing it.

if your doing a reapir in your home you don't need a lisence or a permit. kyle call me when your ready to do something with it and I'll come check it out for ya. 354-0635

what are you hiring for anything I can do.

what are you hiring for anything I can do.

thanks I need both of those two those are the pinout diagrams for the connector at the computer I don't suppose you have the pinouts for the bulkhead connector under the dash by chance for both of those cars?