KazeSupra

Edited first post to add exhausts. Mods, please delete the other exhaust thread.

OK, so I've received like 30 hits for various parts, so I'm going to go ahead and part the car out. I'll have some pictures taken this evening, as well as a running video. Compression test will be done this weekend, and I will NOT sell the engine until then. Since I've had multiple requests on quite a few of the parts, offers will be based on who's asked first via timestamps. Come and get it!

Thanks guys.

To be honest, I'm not sure. Some of this is just repeated from the last owner.

THE PARTOUT IS ON! I’m in the process of parting out my car. It was just salvaged after an upper ball joint failed and it sent me over the curb. There was a lot of suspension damage on the driver’s front, and some bumper damage, but not much else. I’ll have pics, a video of the engine running, and a compression test done this weekend. Most of the parts did not get damaged in the accident, so everything is pretty much bolt off and bolt onto whatever car you choose. Send me your parts lists! Also, ask questions prior to purchasing parts. I don’t think I should have to say this, but just in case, parts are as is, where is with no refunds. I’ll ship most items at buyer cost (not engine, transmission, etc). Thanks for looking. Contact info at the bottom. Engine External & Turbo * Bullseye Power 60-Trim turbo, no smoke or shaft play, 53lb/minute - $500 or trade for an 8-blade, 1995-1998 Holset HX35 * 3.5” thick FMIC, short route (meaning no fog lights), 2.5” piping, dent in upper left of core, no leaking for me - $400 or trade+cash for a much smaller intercooler setup that keeps fogs * FIC 850cc Injectors – $200 or trade for larger injectors Management * MAF Translator, almost new - $150 Spec Stage 3 4-puck clutch kit - $100 Gauge cluster with APC Overlay - $30 Brakes (20 miles on everything “New”) * New slotted rotors from Trinet, Duralast Ceramic pads with lifetime warranty, (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=160338129254) - $200 * New rear powder coated calipers, A1 Cardone - $120 Suspension * Ground Control Coilovers - $250 * Tokico HP Struts Front and Rear - $200 Body * Black 2G Driver's fender - a little bent up. Could be repaired. - $5 * Black 2GA Eclipse Rear Bumper - has bumper support, good condition - $50 * Power steering rack - re manned rack that I had installed when I first got my eclipse (maybe 400 miles ago). Includes reservoir - $100 * Black 2G doors - I have both doors, no speakers or inside trim, harness cut - $20 each * Black 2GA Eclipse hatch - good glass, cut harness, needs wiper arm and motor (which I can supply for additional money, but I figured since I'm the only one that likes the rear hatch wiper, it wouldn't matter, so I wanted to keep it) - $40 * Shell - I have a stripped shell with good quarter panels, black - $100 or it goes to the junkyard friday * lots of random grey plastic interior pieces, dash (broken near radio bezel), console, etc - $100 for all of them * 2 cloth seats, great condition (even better once I finish cleaning them) - $50 * Rear taillights, GREAT condition, $75 Questions? christopher@becker-ent.com 937-416-3060 PM.

Bump still for sale.

bump, make offers.

Pics up! http://img268.imageshack.us/img268/7318/image01k.th.jpg http://img14.imageshack.us/img14/175/image02vsh.th.jpg http://img40.imageshack.us/img40/6161/image03iqk.th.jpg http://img268.imageshack.us/img268/5581/image04y.th.jpg http://img268.imageshack.us/img268/467/image05v.th.jpg

price is in ad, pictures this weekend, also in ad. Thanks.

I'm selling a full turbo back exhaust for a 2G AWD. The downpipe is a 2.5" unknown brand (maybe apexi). Looks to be stainless, straight through, and doesn't have issues. There is a 2.5" test pipe. The catback is a Thermal R&D 3" that narrows to 2.5: at the test pipe (or cat if you have one). The exhaust has a dent in the piping in the first bend, but other than that is good. Getting rid of this because I purchased a 3" full turbo back (half unknown half Dejon) with a magnaflow muffler. 300+shipping for everything obo. Will break up if someone is interested in the Thermal by itself. I will try to have pics up this weekend if it doesn't sell before then. Thanks for looking! Questions? christopher@becker-ent.com PM 937-416-3060 (leave message)

SOLD! Lock it up mods. Thanks.

bump

I tore it down because I was going to build it up into this dream monster vehicle, which never happened. I "think" it has 120K, but I can't find an email that verifies that.

nope, need a running car that requires little attention

well, with all the accessories, it's at the right price I think.

stick it in that Corolla

Bump for new price

Bump...may have a lead, but no money has been sent yet, so still open to AWD cars. Thanks.

nope, sorry. The only reason I'm selling my car is that, along with the payment, it's not fast and it's not AWD. I've settled way too many times before. I will wait for what I want, and AWD dsm. Thanks anyways.

Bump, had a couple of leads, but one got sold out from under me. Still looking.

Hello. I'm selling a complete 1992 SC400. This is a rear sump. I purchased this engine from a member on here from Cincinnati. Unfortunately, with my wife still out of work, I need to make some side money and move some stuff that I don't need anymore. This has to be one of them unfortunately. I took this engine apart last year, and it has been here ever since. The engine was complete when I got it, and included a full SC400 harness from the engine bay to the rear taillights. The only thing that I have parted with was the AFM which I sold last year to a Supra owner. Everything else is here. I paid $500 for the entire thing. Asking $300 for quick sale. I am not parting out any of it, so this is a buy it all at once sale. Pickup only, in Dayton OH. You can reach me here, via email (christopher@becker-ent.com), or by telephone (937-416-3060, leave a message if I don't answer). Thanks for your interest. Pictures. http://img4.imageshack.us/img4/4793/image001mkx.th.jpghttp://img27.imageshack.us/img27/9441/image002vke.th.jpghttp://img25.imageshack.us/img25/1021/image003ple.th.jpghttp://img23.imageshack.us/img23/4245/image004gru.th.jpg http://img21.imageshack.us/img21/3582/image005l.th.jpghttp://img4.imageshack.us/img4/24/image006n.th.jpghttp://img25.imageshack.us/img25/6012/image007tsd.th.jpghttp://img10.imageshack.us/img10/8314/image008rlx.th.jpg

Send me pictures and information (miles, problems, mods) to christopher@becker-ent.com. Thanks.

Seems like he's not coming down from $7k and I'd hate to lowball him for what I would actually pay for the car. I hope he gets to sell it though.

I totally forgot about that car. Thanks! Well, I just don't believe that a stock 1G DSM is worth that to me. I'm not looking for a collectors car. Just a non-beater dsm that my wife will ride in. I had my version of a clean DSM (92 Laser RS Turbo AWD with 128k miles, older lady owned, stock), but it was totaled in a wreck, or I'd still have it. Looking for $<6k

nope, can't do it. If I was going to stay FWD I would just keep my ultra reliable Accord.