KazeSupra

No sir. I only have the parts listed for sale. That is all. Thanks.

Bump...

The back-from-honeymoon bump!

Lowered price for quick sale: $175! I need to sell it this week, as the money is going to be used on my honeymoon. Come and get it! Chris.

I have 2 full sets of valves. $20 + shipping. Most of them need a little cleaning and look like this: http://img195.imageshack.us/img195/3530/hpim05743mq.th.jpghttp://img195.imageshack.us/img195/2558/hpim05784sp.th.jpg I have one set of valve springs. $15 + shipping. http://img365.imageshack.us/img365/9535/hpim05753ta.th.jpg I have one set of piston oil squirters. $25 + shipping http://img195.imageshack.us/img195/4040/hpim05731ra.th.jpg Chris.

Sawblades - 4 of them, 2 with decent tires (Yokohama A-008R's, 2/16"-3/16" tread left), one with a Goodyear tire with belt showing (not in good condition). The sawblades themselves are in decent condition. No noticable curb rash. Some small scratches (nothing that can't be sanded/painted out). Will probably need repainted. 40 + shipping for all of them. http://img310.imageshack.us/img310/6734/sawblades14qz.th.jpghttp://img152.imageshack.us/img152/2820/sawblades25ys.th.jpg Stock turbo cams. Need a little re-polishing on on the lobes and bearing surfaces. Otherwise good shape. Price is $50 + shipping. http://img340.imageshack.us/img340/2809/hpim05697or.th.jpghttp://img340.imageshack.us/img340/9151/hpim05717cg.th.jpg Lower intake manifold. Cleaned. Looks pretty good. Price is $15 + shipping. http://img357.imageshack.us/img357/1185/hpim05720lq.th.jpg

This stuff needs to go quickly, so all prices are OBO. Post questions either here, you can call me 937-416-3060, PM me, or email me (kazesupra@yahoo.com). 7M-GTE Head, 88, relatively clean (I would have to take a brush or something to it, because it's been through the power washer 5 times or so and I couldn't get it clean), ported somewhere between a street port and a race port. Jobs performed are: Cleaned (most of the way) removed flashing smoothed ports blended bowls to port blended guides for smoother flow Intake ports finished in 80 grit, exhaust in 100 grit Decked for ultra smooth finish. Things that I would do before mounting: Cam bores straightened. The head was bowed when I got it on the cutter. removed almost 0.030" to correct. Head is now ultra smooth where it connects to the block, but I believe that you will need to straighten the cam bores because of the warpage on the rest of the head. Cost for machine work at a local shop is $240. Valve seats recut. I didn't check them out that much, but as far as I know, they will probably need to be recut, which isn't that hard of a process. Also, the valves need to be lapped to accept the new surface. I'm sure it will run in its current state, but this was recommended from my teacher to do this before installing the valves for a greatly reconditioned head. Flowed on flow bench. I got before numbers on the head, but I wasn't able to get after port work numbers on the head. There's a local guy that will do it for $40. I'm sure of sizable gains based on the bowl, short side radius and smoothing work I have done. Price is $150 OBO + shipping. There is alot of money in port work in the heads, and I'm giving that to you at a fraction of the cost. For $200, I'll include one set of valves and valve springs and the cams. Last picture is the various parts that are included with the head. http://img357.imageshack.us/img357/7640/hpim05502vx.th.jpghttp://img340.imageshack.us/img340/2369/hpim05619dd.th.jpghttp://img357.imageshack.us/img357/7053/hpim05622hh.th.jpghttp://img357.imageshack.us/img357/2751/hpim05638dp.th.jpg http://img357.imageshack.us/img357/1926/hpim05645ya.th.jpghttp://img357.imageshack.us/img357/6417/hpim05655ee.th.jpghttp://img340.imageshack.us/img340/7580/hpim05671gt.th.jpghttp://img340.imageshack.us/img340/8836/hpim05687np.th.jpg http://img365.imageshack.us/img365/1464/hpim05768xs.th.jpg

Lowered price: $250! Come and get it!

try this: http://cgi.ebay.com/Dell-GX260-PC-Tower-1-8GHz-40GB-HDD-512MB-DDR-RAM_W0QQitemZ8805130375QQcategoryZ51131QQrdZ1QQcmdZViewItem

Item is now on eBay. Get it and don't pay shipping! http://cgi.ebay.com/ws/eBayISAPI.dll...MESE%3AIT&rd=1 Chris.

Will also trade for video card + cash.

Doh! Can't believe I didn't put that in there. 17".

I have a refurbished Dell GX260 that is for sale. It's got a clean Windows XP operating system on it, and will come with a disk as well. It is also registered with Microsoft, so you will be able to get all the updates. Here are the system specs: 1.8GHz Processor 512MB RAM CR-RW drive 40GB hard drive Comes with unit, 17" monitor, keyboard, and mouse. Asking $300. PM or email me (kazesupra@yahoo.com) for any details I left out. Chris. Pictures: http://img248.imageshack.us/img248/7742/hpim04872st.th.jpghttp://img248.imageshack.us/img248/2078/hpim04892eh.th.jpghttp://img138.imageshack.us/img138/6909/hpim04902pe.th.jpg http://img248.imageshack.us/img248/4789/hpim04915yf.th.jpghttp://img248.imageshack.us/img248/8888/hpim04923gq.th.jpghttp://img138.imageshack.us/img138/4378/hpim04934yb.th.jpg

Bump. New parts! 7M-GTE Head, 88, relatively clean (I would have to take a brush or something to it, because it's been through the power washer 5 times or so and I couldn't get it clean), ported somewhere between a street port and a race port. Jobs performed are: Cleaned (most of the way) removed flashing smoothed ports blended bowls to port blended guides for smoother flow Intake ports finished in 80 grit, exhaust in 100 grit Decked for ultra smooth finish. Things that I would do before mounting: Cam bores straightened. The head was bowed when I got it on the cutter. removed almost 0.030" to correct. Head is now ultra smooth where it connects to the block, but I believe that you will need to straighten the cam bores because of the warpage on the rest of the head. Cost for machine work at a local shop is $240. Valve seats recut. I didn't check them out that much, but as far as I know, they will probably need to be recut, which isn't that hard of a process. Also, the valves need to be lapped to accept the new surface. I'm sure it will run in its current state, but this was recommended from my teacher to do this before installing the valves for a greatly reconditioned head. Flowed on flow bench. I got before numbers on the head, but I wasn't able to get after port work numbers on the head. There's a local guy that will do it for $40. I'm sure of sizable gains based on the bowl, short side radius and smoothing work I have done. Price is $300 OBO + shipping. There is alot of money in port work in the heads, and I'm giving that to you at a fraction of the cost. Stock turbo cams. Need a little re-polishing on on the lobes and bearing surfaces. Otherwise good shape. Price is $50 + shipping. Lower intake manifold. Cleaned. Looks pretty good. Price is $15 + shipping I have some interior pieces too, I'll post them up when I can. I also have pictures of everything, which I will get up either this evening or tomorrow after work. Thanks for viewing. Post questions either here, you can call me 937-416-3060, PM me, or email me (kazesupra@yahoo.com). Chris.

The engine assembly is SOLD. Thank you everyone for your interest. The Sawblades are still available. Come and get them!

PS: It's first come first serve. I have some interested folks, but no money yet. Thanks.

Here's the spot on the crank near the pully that needs to be filed: http://img139.imageshack.us/img139/196/hpim03852ef.th.jpg Reconditioned Rods: http://img88.imageshack.us/img88/48/hpim03749wr.th.jpg Rods were weighed on both ends, weighed as a whole, and each end balanced (i.e., little ends all balanced, big ends balanced): http://img139.imageshack.us/img139/4024/hpim03969zc.th.jpg Oil pump I'll include with the purchase, since I don't need it: http://img88.imageshack.us/img88/619/hpim03785fe.th.jpghttp://img88.imageshack.us/img88/825/hpim03792cl.th.jpg

Wrist Pins included with pistons: http://img110.imageshack.us/img110/702/hpim03704vh.th.jpg Rings: http://img139.imageshack.us/img139/483/hpim03887kj.th.jpghttp://img139.imageshack.us/img139/3101/hpim03879mr.th.jpg 6M Crank: http://img139.imageshack.us/img139/747/hpim03817ga.th.jpghttp://img88.imageshack.us/img88/4416/hpim03868ad.th.jpg

Ready to be lapped for MHG... http://img316.imageshack.us/img316/7108/hpim03571uy.th.jpg Pistons: http://img110.imageshack.us/img110/6903/hpim03689zn.th.jpghttp://img110.imageshack.us/img110/4435/hpim03696en.th.jpghttp://img110.imageshack.us/img110/4695/hpim03716yd.th.jpghttp://img110.imageshack.us/img110/1673/hpim03728wr.th.jpg

OK, pics time! Block: http://img76.imageshack.us/img76/309/hpim03563al.th.jpghttp://img76.imageshack.us/img76/6784/hpim03601vi.th.jpghttp://img92.imageshack.us/img92/9952/hpim03625zd.th.jpghttp://img76.imageshack.us/img76/3116/hpim03636ac.th.jpg http://img92.imageshack.us/img92/3484/hpim03659wm.th.jpghttp://img76.imageshack.us/img76/4679/hpim03669cv.th.jpg

I have a few things for sale Sawblades - 4 of them, 2 with decent tires (Yokohama A-008R's, 2/16"-3/16" tread left), one with a Goodyear tire with belt showing (not in good condition). The sawblades themselves are in decent condition. No noticable curb rash. Some small scratches (nothing that can't be sanded/painted out). Will probably need repainted. 40 + shipping for all of them. http://img310.imageshack.us/img310/6734/sawblades14qz.th.jpghttp://img152.imageshack.us/img152/2820/sawblades25ys.th.jpg eBay Nippon Pistons. +0.020" over. New, with pins and rings, only test fitted to machined block. $200 + shipping (exactly what I paid, normally 225 + shipping on eBay). SOLD! Stock Rods, cleaned and balanced withing 1g of each other, big ends resized to factory tolerances, w/ARP Rod Bolts. $150 + shipping. SOLD! Stock Crank, 87-88 (6M I believe), balanced, journals polished, there's a small abraision near the pully area that needs to be filed off, other than that, pretty darn perfect. 75 + shipping. SOLD! Machined 7MGTE block. Bare block was decked, honed for +0.020" over pistons, cleaned and deburred. $250 + shipping. SOLD! All prices are Or Best Offer. You can get the block, pistons, rods, and crank for $500 + shipping for all of them. You'd save $175 on the total cost of them seperate. Block has hundreds of dollars of machine work in it, so you're getting a great deal whichever way you choose. SOLD! I will post all the measurements that I took during the process, as well as pictures, within the next couple of days. I will also add parts to this listing as I have quite a bit, just havent gotten an inventory or pictures of them yet. I do accept paypal (christopher@becker-ent.com). Any questions, post them here, PM me, email me (kazesupra@yahoo.com), or call me (937-416-3060, leave a message if you don't get through, I'll call you back). Thanks for viewing. Chris.

Car is sold. thanks for everyone's interest. Chris. Mods, please lock. Thanks.

I have a sale pending... To answer your questions, yes, you should just need an engine to get the car to run. I purchased the car without an engine. The stock tail lights are on the car. They are just painted with some crappy paint that I'm sure you could wetsand off. If you purchased the car, everything (besides my tools and equipment that's in the car) in the pictures + the interior would come with the car. Thanks for your interest. Chris.

Hey guys. I'm selling another Supra. This was going to be a project for me, but I'm looking to get married here next year, and I need to get some bills payed off. So, I'm selling my project. Silver 89, almost 89K miles on the chassis, no rust on body that I can see. I used the car for a make-shift roll cage project that I did in a fabrication class, as you can see in the pictures. Cage is made out of Chrome-Moly. Cage is MIG welded, and there is surface rust, which you could sand off and paint if you so desired. Or just cut the cage out and put the body panels back on the car. Parts Missing: Engine Exhaust form the cat-back Grey Leather Interior (I still have all of the pieces, just not in the car, other than the driver's seat) Here are some of the pictures: http://img165.imageshack.us/img165/1054/hpim02366ud.th.jpghttp://img442.imageshack.us/img442/5144/hpim02375kv.th.jpghttp://img442.imageshack.us/img442/1492/hpim02383qx.th.jpghttp://img442.imageshack.us/img442/9986/hpim02391eb.th.jpg http://img442.imageshack.us/img442/9071/hpim02401kl.th.jpghttp://img442.imageshack.us/img442/229/hpim02413hd.th.jpghttp://img442.imageshack.us/img442/4109/hpim02422mh.th.jpghttp://img442.imageshack.us/img442/57/hpim02439pk.th.jpg Asking price is $800 obo. If you are interested or have questions, you can email me @ kazesupra@yahoo.com or PM me or call me @ 937-416-3060. Please do not post in this thread or contact me unless you have interest in purchasing the car. Thanks. Chris.

Bump...